My SB750, HD4850 x-fire, 9850, H20 Build...

Printable View

Show 100 post(s) from this thread on one page

08-12-2008, 01:47 PM
charged3800z24

3DMark06 Phenom 3.2ghz

http://service.futuremark.com/compare?3dm06=7791807

I am now going to try HTT.. I will post back in a min....I put a fan over the fets..They are nice and coooooollll!!!!!!
08-12-2008, 02:45 PM
charged3800z24

Htt Oc

Here is my first attempt

http://3800z24.info/Phenom/phenomFSB3.2ghz.JPG
08-12-2008, 04:39 PM
Phenomenalspeed

^^^ Stable???^^^
08-12-2008, 04:41 PM
charged3800z24

So far.. my temps are a lil higher...
08-12-2008, 04:49 PM
Phenomenalspeed

Quote:

Originally Posted by charged3800z24

So far.. my temps are a lil higher...

Bloody good overclock. Voltage is high though. Is that overclock through BIOS or AMD Overdrive?

How high are temperatures at these speeds?
08-12-2008, 05:39 PM
trueblue

compiler comparsions

Quote:

Originally Posted by informal

Well it's intel's compiler,they made it the way it is.Software companies can use other compilers out there,but most firms prefer intel's since it gives the best performance on intel's chips(which are the most spread CPUs on the market).
It would be nice to see a Linux open source test bench application suit(like the one Phoronix use),which could be compiled with best compilers out there for both intel and AMD.Crippling the AMD to less optimized SSE path(as shown before in my previous post) has serious performance effects on AMD's chips.I wonder what paths are used by such apps and games as Lost Planet,FutureMark Vantage,Cinebench etc. when you run them with non-intel CPUID.

Take a look at these links, where they compare various fortran compilers. :up:

http://www.polyhedron.com/pb05-linux-f90bench_p40html

http://www.polyhedron.com/pb05-linux-f90bench_AMD0html

They also have some comparisons for Vista.
08-12-2008, 05:46 PM
charged3800z24

Quote:

Originally Posted by Phenomenalspeed

Bloody good overclock. Voltage is high though. Is that overclock through BIOS or AMD Overdrive?

How high are temperatures at these speeds?

I am under H20 and idle is around 40*c and load is 49*c I dunno why idle is so high.....49 was peek under prime after the past few hours....

edit... No longer stable.. Droped core "0"
08-12-2008, 07:54 PM
Daveburt714

Quote:

Originally Posted by Particle

In short, everyone but me has had good results. :D Some people are getting 200-400MHz increases. I on the other hand didn't move a single MHz. I'm still waiting on some sort of mystery BIOS for my ASUS though, so things may change.

It's NOT only you Particle... :(

I got higher clocks on the old 96BE but I think it was only because I was pushing alot more V's than I'd ever done before, and it turned out not to be stable anyway....

After I swapped it out and put the 9850 in the results were much less pleasing. In fact I can't even get the clocks I was getting on the K9A2 using this Asus.

Just my luck... I had so many problems with the GBT-DS5 that I paid the extra few bucks for the Asus 780GX and now the GBT GX boards are smoking, while I again end up with a POS... :shakes:

I'm like you, pretty sure it's just the "0204" Bios, but trying to find an update seems to be near impossible and Asus tech support is taking an awfully long time to get back with my trouble report... **sigh**

:bows: :bows: OH GREAT BIOS GODS :bows: :bows:

In the Name of the Great Sacred Cow.
We Besieche thee...
Send us a link to an M3A78-T Bios.

Ahem

Not polically correct, I know, but I'm desperate... :D
08-12-2008, 08:17 PM
charged3800z24

I am runnin 3.0 stock v-core. Prim is canking away..I just am curious....;)
08-12-2008, 08:34 PM
Daveburt714

Sure... Rub it In Charged... :D

Glad it's working for ya Bro.... Just wait till I get a decent Bios! :rofl:
08-12-2008, 10:14 PM
ah_khoo

hi sir,

can i check with you what is the load temp of your pwm? I'm curious to know how well is the copper heatpipe doing. :)

thanks in advance. ;)
08-13-2008, 02:56 AM
FlanK3r

try wprime benchmark and Cinebench and post screens please (u have cool HTT and NB MHzs :) )
08-13-2008, 05:15 AM
charged3800z24

Quote:

Originally Posted by Daveburt714

Sure... Rub it In Charged... :D

Glad it's working for ya Bro.... Just wait till I get a decent Bios! :rofl:

I think all the boards will benifit from a better bios....Well 3ghz on stock v has passed all night on prime.. I stopped it and will try something else..
08-13-2008, 11:11 AM
charged3800z24

Quote:

Originally Posted by ah_khoo

hi sir,

can i check with you what is the load temp of your pwm? I'm curious to know how well is the copper heatpipe doing. :)

thanks in advance. ;)

I have a fan cooling the heatsink.. temps are not what they would be. The heat sinks are almost cold to the touh now tho...;) They were pretty warm.
08-13-2008, 03:30 PM
nanohead

Quote:

Originally Posted by charged3800z24

Here is my first attempt

http://3800z24.info/Phenom/phenomFSB3.2ghz.JPG

Thats REALLY encouraging that you're getting FSB overclocks like that and not just a multi based one. I'm pretty stoked actually to see that. I got one of those cheapo 8650 tri cores off fleabay (probably fell off the back of a truck, but for 100 clams, who care). I can get 2.8 out of it but it blows up here and there. 2.7 is solid. I think I'm gonna get a gbyte board and pump some volts and clocks up its keester and see what happens ;)
08-13-2008, 04:11 PM
charged3800z24

Quote:

Originally Posted by nanohead

Thats REALLY encouraging that you're getting FSB overclocks like that and not just a multi based one. I'm pretty stoked actually to see that. I got one of those cheapo 8650 tri cores off fleabay (probably fell off the back of a truck, but for 100 clams, who care). I can get 2.8 out of it but it blows up here and there. 2.7 is solid. I think I'm gonna get a gbyte board and pump some volts and clocks up its keester and see what happens ;)

I thought about getting a tricore just to play with...Would be good to see your results if you get a board...
08-13-2008, 04:32 PM
bingo13

Quote:

Originally Posted by Particle

Yes! Where will they be uploaded to though, exactly?

They are uploaded at our site. Out of respect to Fugger, I do not link to them from here. ;)
08-13-2008, 05:37 PM
charged3800z24

here are a few runs I did at 3.1

http://3800z24.info/Phenom/3.1htt/wprime.JPG

http://3800z24.info/Phenom/3.1htt/rar_Pi_1m.JPG

http://3800z24.info/Phenom/3.1htt/cinebench.JPG
08-13-2008, 05:54 PM
Particle

Quote:

Originally Posted by bingo13

They are uploaded at our site. Out of respect to Fugger, I do not link to them from here. ;)

Understandable. Can you tell me the name of the site at least or link me in a PM? It's very important. :)
08-13-2008, 07:25 PM
bingo13

Quote:

Originally Posted by Particle

Understandable. Can you tell me the name of the site at least or link me in a PM? It's very important. :)

http://www.xtremesystems.org/forums/...07&postcount=1 The link in that post will get you headed in the direction you need to go. ;)
08-14-2008, 02:35 AM
oldpueblo

New beta BIOSes. BIOSii? :p

EDIT: Actually I just made another thread to keep charged's thread clean:

http://www.xtremesystems.org/forums/...37#post3216637
08-14-2008, 06:10 AM
ah_khoo

Quote:

Originally Posted by charged3800z24

I have a fan cooling the heatsink.. temps are not what they would be. The heat sinks are almost cold to the touh now tho...;) They were pretty warm.

thanks for the reply sir... i was just concerned about the pwm temp. currently i've been bugged by high temp @ pwm whenever i do prime. if pwm temp is not a problem on this board, i'll definitely grab one when it's available locally. :)
08-14-2008, 08:08 AM
charged3800z24

I think i found something quite interesting... Is how well this CPU undervolts now.. I dunno if it is from ACC or not.. I will check that out tonight maybe...
May be it is just me, but 2.7ghz at 1.8v seems pretty good considering that the 2.5ghz stock uses 1.3v

http://3800z24.info/Phenom/1.184v.JPG
08-14-2008, 11:57 AM
Rammsteiner

Quote:

Originally Posted by charged3800z24

I think i found something quite interesting... Is how well this CPU undervolts now.. I dunno if it is from ACC or not.. I will check that out tonight maybe...
May be it is just me, but 2.7ghz at 1.8v seems pretty good considering that the 2.5ghz stock uses 1.3v

I guess you meant 1.18V:p:
08-14-2008, 12:54 PM
charged3800z24

Quote:

Originally Posted by Rammsteiner

I guess you meant 1.18V:p:

Yesh.. yesh I did :D

I made to profiles in AOD and can switch between them on the fly. One is 3.0ghz stock 1.3v and 2.7ghz 1.18v. Just thought I'd share if anyone was curious.

Show 100 post(s) from this thread on one page