Printable View
What's your stepping?Quote:
Originally Posted by Psycho_eddie
As is said earlier here, if your ht link runs fine at 1250, then you leave it at that.
We're hoping the 89W version will clock even higher because of lower temps, anyone getting one of them (or the X2 6400+ Black Box) can feel free to post results and steppings in this thread.
The list is updated:)
What I can say??Quote:
Originally Posted by Sabuy-Sabuy
:clap: :up: :shock: :eek2: :hitself: :toast: etc....
Superb chip you have there! Want to swap? :D
Just had to dismantle rig as im getting a new graphics card, found out:Quote:
Originally Posted by LIKMARK
CPU: CCB8F 0717VPMW
been running 13x250 for last few weeks on stock volts... chose this setting so can run my OCZ SLI pc8500 ram @ 1000MHZ.. but in playing around last month i ive been over 3600mhz playing around with fsb vs multi going over 400fsb. Once ive resetup, ill have to play around again as ill be having better cooling power etc, one thing as i run raid its more tempermental with ocing.. had to reinstall windows last time but with vista should be able to repair as vista acutally can see raid setups.
Has any1 anywhere got close to 4000mhz with an am2 cpu yet? Only if i had phase change:ROTF:
anyone else have this stepping CCB8F 0721TPMW i will post a screenie of what im currently running at in a few moments.
6400+ In the house!
Will post results tonight.. so far it's not bad.
brief results from quick play.
VID=1.40
1.25v undervolt @ stock
3.3 @ 1.37 (slight undervolt) is a bit disapointing so far, allthough this is with the stock 6000+ cooler, and temps are baad.
tonight will be real play time.
ok so here it goes x2 6000+ stepping CCB8F 0721TPMW, im not done with it yet where is what i got it at so far cooling is a scythe Infinity and a 70cfm fan:
http://img169.imageshack.us/img169/9...testih2.th.jpg
Wow.. very nice.. is the 6400+ out in the market already? Or is this an early sample.Quote:
Originally Posted by mAJORD
Can't wait to see what you got.. please give use the full specs of your system.
SAD
stepping? :)Quote:
Originally Posted by mAJORD
Bring on the results mAJORD!! and som pics!!Quote:
Originally Posted by mAJORD
How dit you get by it?
All I can remember is it's a CBB8F 0722
I'm at work atm :P
A local retailer got some in on wednesday so I couldn't help myself :/
Have an E6750 here aswell to compare stock performance, though we allready have 1 source of results there.
One other thing. No unlocked multi! :(
What, 16x isn't enough? Bastard :p::p:Quote:
Originally Posted by mAJORD
Haha, well the promotional doco mentions unlocked multi's so I question why they bothered if it's not upwards unlocked. (could be jsut the bios not recognizing it I don't know at this stage)
Annyway not to worry for the moment :p
http://img248.imageshack.us/img248/7014/boxps7.jpg
http://img401.imageshack.us/img401/2522/chipik4.jpg
Just some quick runs, no proper stablilty test lengths here but I want to go to bed :cool: Starting to get hot again over here.. 25c ambient's, goodbye to long chilly nights for OCing for the year I guess :rolleyes:
Max Orthos on the stock 6000+ Cooler (not included) LOL @ temps :) Didn't want to push any higher than this. Not actually sure how accurate those temps are, then again it was a pretty :banana::banana::banana::banana:ty mount.
http://img518.imageshack.us/img518/4439/maxstkhsrn0.jpg
Max Orthos on Water (Swiftech block, diy rad). pumped the Vcore up to 1.5/1.49 load.
http://img249.imageshack.us/img249/8...stwaterad0.jpg
And a quick 1M pi run @ 3.6 . Still using my :banana::banana::banana::banana: ram @ 375 5-5-5-18 as my Crucial STILL hasn't turned up yet, so pissed off. Point being though it needs more juice to head over 3.6 @ these temps.
http://img518.imageshack.us/img518/9...tledpi1it6.jpg
So it seems pretty inline with other Good F3's. I'll crack out the peltier next. Time to go for the 4gig club :shrug: It seems these things Love good temps. Just moving from the stock cooler that max of 3.3 @ stock - 70C load, went straight to 3.43@ stock - 50C load.
wow. it is my first time seeing a 6400+. Amazing how it overclocks so well. I guess that is same for all b8s. But I am not very impressed with the orthos timing. I could pull off under 25 second with 14X mutli.Quote:
Originally Posted by mAJORD
before you go sub zero do some water test
btw :eek: :up:
do cinebench version 10 test...
get it here:
http://www.guru3d.com/newsitem.php?id=5754
Looks good, im waiting for the 6000 89W edition to come out... then we can get some serious ocing!!
wow. I love your rig and monitor.Quote:
Originally Posted by Psycho_eddie
TicTac:
32bit: 3.56Ghz
http://img139.imageshack.us/img139/5...3560375nm5.jpg
Had a play with the peltier.. it's good :) quite controllable temps down to about 0c.
I'm going to attempt to go below 0 tommorow with LESS voltage than here.. as in line with what Flytek found, 1.6v + has little to no effect, lower temps would be better.
So This was captured @ 5-6c Idle. Not stable. (Can't be used under load anyway, pelt not powerfull enough) But alas it's my first 4gig Validaiton on AMD so.. yeah happy times ;)
http://img138.imageshack.us/img138/6400/cpu4006go6.jpg
http://valid.x86-secret.com/show_oc.php?id=231099
mAJORD 4 Gigs!! That is sick!! :eek:
What was the voltage in bios?
for mine X2 5600+ 3548 MHz on 1.55 vcore is max for benches
http://valid.x86-secret.com/show_oc.php?id=226801
I like!, well done reaching 4000MHZ... looks like Amd still have some give left in it!
Amd 6000 125W RR £100, and Amd 6400 rrp??
Really annoying with my rig awaiting the new Graphics card, cant do ny overclocking :(
Whats would you say the 24/7 speed of this chip is?
when are those 6400+ reaching US?
coldbug is @ about -4 at the 250HTT mark.. grr
Congrats mAJORD! Not many who has reached the 4GHz mark!! Awsome!
go for the WR next!
BTW: Post your results in the Xtreme OC part of the forum. Need some AMD results there to kill the Intel dominance;)
Just make them get used to it as it will happen anyways when the Phenom comes to town:)
Congrats mAJORD :up:
Both brilliant job on finding X2 6400+ that early in retail and bringing us another 4GHz 90nm X2!! Masterpiece :clap:
I made a boo boo in my stepping! I just tore down my rig to clean and looked at the stepping.
CCBVF 0704TPMW is the right stepping..
BTW, thats good stuff mAJORD!