1Ghz 8800GTX w/ 5358MHz X6800

Printable View

Show 100 post(s) from this thread on one page

11-26-2006, 06:22 AM
Zeus

:slobber: Wow! :eek:

Kingsize score and magic hardware! 1000/1200 on the gfx is not too shabby either.

Has got to be 100K easy with SLI.

Congrats on WR single card. :toast:
11-26-2006, 06:42 AM
trans am

Kinc, what speed/timings is your ddr2 running at? Just curious because nobody has mentioned it and I didn't see screens.

nice job btw :toast:
11-26-2006, 07:33 AM
Kinc

Quote:

Originally Posted by massman

What a beautiful x6800, but don't you have a spare kentsfield for 3dm06?

1004MHz. on the core is impressive too ... DH will be enormeous :D

We have four :)

Quote:

Originally Posted by TaPaKaH

what Vcore on that 5.3-5.4G run ?
got pics of the rig?

too sad AirBaltic does not have cheap tickets to Sweden :(

1.92V. I have a few pics of the rigg on my memory card, will upload em as soon as I can find my card reader :)
11-26-2006, 07:34 AM
massman

Quote:

Originally Posted by Kinc

We have four :)

Scaling to 5GHz. benchstable ?
11-26-2006, 07:35 AM
G H Z

Crazy, very very fast kinc. Paired up with a set of cards things will no doubt get even more interesting.
11-26-2006, 07:51 AM
Kinc

Quote:

Originally Posted by massman

Scaling to 5GHz. benchstable ?

One of em did 4800MHz in the cputest of 06 scoring 7k with the old 2.5" mousepot and low voltage. So with the rev3 pot I think 5GHz is possible :)
11-26-2006, 08:24 AM
massman

Hardware at DreamHack Winter 2006

Processors:
Intel Core 2 Extreme ”Kentsfield” QX6700
Intel Core 2 Extreme ”Conroe” X6800

Motherboard:
Intel Bad Axe 2 i975X
ASUS nForce 680i Striker Extreme
ASUS P5W64 Professional
ASUS P5W DH Deluxe i975x

Graphics card :
2x ASUS Geforce 8800 GTX SLI
1x XFX Geforce 8800 GTX

Memory:
2x Corsair DDR2 PC8888C4DF Dominator
4x Corsair DDR2 PC5400UL (d9 fatbody)
2x Corsair DDR2 PC8000UL (d9 fatbody)
2x Corsair DDR2 PC8500C5 EPP

Cooling:
Mousepot Rev.3 (CPU cooler made from solid copper for liquid nitrogen)
Mousepot Rev.2 GPU (GPU cooler made from solid copper for liquid nitrogen)
A total of 100 liters of liquid nitrogen (LN2)

=> You guys will have lots of fun, I guess :banana:
11-26-2006, 09:21 AM
mrhelix

Shocked score!!!
It's very extreme card ,but anyone know its power assumtion ?
11-26-2006, 09:28 AM
k|ngp|n

Very nice single card guys. :toast:
Took 6 chips to find that one eh? All b1's? How do you tell the week on the chip btw?? The SLI numbers with that power will be :woot:
11-26-2006, 09:45 AM
DeDaL

Fantastic results, Congrats :clap:
Approximately how much liters of nitrogen you spend Kinc ?
11-26-2006, 10:20 AM
JAG87

:eek:

increadible...

i can see G81 being a massively overclocked G80 with 1GB GDDR4 and TEC/air cooling. or just a shrink to 80nm for less heat...

maybe 700 or 750 mhz? that should pull the pants off R600...
11-26-2006, 12:36 PM
Kinc

Quote:

Originally Posted by k|ngp|n

Very nice single card guys. :toast:
Took 6 chips to find that one eh? All b1's? How do you tell the week on the chip btw?? The SLI numbers with that power will be :woot:

4 ;) the rest is qx6700. It is a part of the batchnr. L617A, that is a W17.

Quote:

Originally Posted by DeDaL

Fantastic results, Congrats :clap:
Approximately how much liters of nitrogen you spend Kinc ?

For this session maybe 20 liters.
11-26-2006, 12:47 PM
Kinc

Quote:

Originally Posted by PallMall

ah
perhaps you can confirm wheter this theory hold it's ground or not

L6XX latest week is better
XXX lower is better

i asume about the week is bs?

Well a newer batch should not be worse then the one it proceds. Intel is always struggeling with optimizing the sillicone. W27/31 is probably the best overclockers.
11-26-2006, 01:38 PM
Kinc

Quote:

Originally Posted by TaPaKaH

what Vcore on that 5.3-5.4G run ?
got pics of the rig?

too sad AirBaltic does not have cheap tickets to Sweden :(

It is messy but it works :)

http://www.kinc.se/rigg2.jpg

http://www.kinc.se/rigg1.jpg
11-26-2006, 02:43 PM
Lightman

Quote:

Originally Posted by Kinc

It is messy but it works :)

http://www.kinc.se/rigg2.jpg

http://www.kinc.se/rigg1.jpg

Very nice mess indeed :clap: :clap:

BTW this POT is really huge!! :eek:
11-27-2006, 01:02 AM
TaPaKaH

can I ask sth:
(may be you don`t want to tell): what`s the diameter of the pot ?
11-27-2006, 01:42 AM
zbogorgon

can I ask sth:
(may be you don`t want to tell): you're all so into new rev. of mousepot(kingpin and you), that is so much better than the old one, so what's the secret :D ?
11-27-2006, 04:43 AM
Overklokk

Kinc i need help :)

Tested one of my 8800gtx on cascade today and som strange thing is happend.

847/1200 is 3d stable @ 1,55/2,06v only -50c (this give 901fps nature)

850 on core is no go even with -80c and 1,75v....... cant start any 3d at 850 at all. it just freeze the hole computer :(

Any tips?
11-27-2006, 05:27 AM
rjw

had a similar problem, but just with single phase.

My solution was to lower the voltage. Seemed as if there was overvoltage protection, plus a lot of droop as well (xfx 8800 gtx)

Also my mem voltage, if set too high will cause a similar problem. It's like the card is telling the software that it's a no go.

Strangely, after things began to work and I upped the voltage, I ended up back at the same voltages as when the card wouldn't work.

I've seen it happen in the middle of a bench as well. frame rate fell off drastically once the card went into safe mode or something.(right near 1.75v)

these cards are in need of a v-droop mod. I set 1.67v to get 1.55 minimum. the gpu voltage is all over the place....so far keeping gpu at or above 1.5v and mem at 2.16v, I got 810/1220 and a single card score of 15,565 (w/ E6600 @ 4.4) I am in dire need of a better cpu and/or cascade on the socket.

BTW Kinc...nice job
11-27-2006, 07:36 AM
Kinc

Quote:

Originally Posted by Overklokk

Kinc i need help :)

Tested one of my 8800gtx on cascade today and som strange thing is happend.

847/1200 is 3d stable @ 1,55/2,06v only -50c (this give 901fps nature)

850 on core is no go even with -80c and 1,75v....... cant start any 3d at 850 at all. it just freeze the hole computer :(

Any tips?

What bios does your card have? It is printed on a sticker attached to the pcb.
11-27-2006, 11:05 AM
guess2098

Quote:

Originally Posted by Kinc

1st X6800 to test a week 17 same batch as the one I had before. Only slightly more stable. Going to test all on ln2 during the weekend as the result will differ on lower temps.

X6800 @ 4653MHz

http://www.kinc.se/85k.JPG

compete with you and Kingpin is like Via vs Intel hahaha
damn nice chip man :D
i am starting LN2 next time hehehe

almost same speed compare ~4.6G, 900 vs 990

http://www.iamxtreme.net/video/8800gtx/01.jpg

your game 1 is lower than mine but game 2 3 4 are faster.

eeee, i hope we can meet sometime (all the crazy ocer) XD
11-27-2006, 11:13 AM
massman

GT1 = raw cpu power + luck to have a good run.

Your GT 2-4 are slower because of the lower gpu clocks + lower bus speeds (although you did a great job coming so close to his score)
11-27-2006, 02:27 PM
Viss

Great single card results. Car low can vary up to 40 fps (if not more on these speeds) at the exact same clocks.
11-28-2006, 12:42 PM
Kinc

Started testing SLI today. CPU is only on air since I'm out of LN2. On the way to Dreamhack tomorrow I will pickup 60 liters were I will be joining crotale for a few days of extreme fun! :D

http://service.futuremark.com/compare?2k3=5077017

http://www.kinc.se/84k.JPG

http://www.kinc.se/sli0.jpg

http://www.kinc.se/sli1.jpg
11-28-2006, 12:49 PM
M3kk

Hm.. nice..:)

Show 100 post(s) from this thread on one page