Lol, you haven't seen me solder.
I'll probably just leave it. It's nice and stable. No fluctations.
Printable View
Lol, you haven't seen me solder.
I'll probably just leave it. It's nice and stable. No fluctations.
Anyone know if there's possible to use 10kvr for the vMCH mod?
Why am I still not understanding how to do this pencil mod? Am I retarded? I cant see where to do it. Can someone please help me.
Here's a close-up. http://www.xtremesystems.org/forums/...15&postcount=5
Here's another, further away. http://www.xtremesystems.org/forums/...2&postcount=26
You "pencil" in between the 2 ends of that tiny resistor. The lead conducts the current past the resistor.
Just completed the Vmods and they all work great. I found that roughly 20k will raise vcore by .6v so the mod can be done with a 20k vr. Just be sure to set your vcore in bios down by at least .5~.6 below where you usually run at.
Yes you can. It will raise the voltage roughly .5~.6 so 1.45 bios at 10k will give you roughly 1.5Quote:
Originally Posted by ManagHead
Do you mean it will raise 0.05? If I have 1,45V in Bios, and it raises 0.5V, it will become 1,95V?Quote:
Originally Posted by Quest For Speed
Sorry, I meant .05. I currently have my VR set at 10k and bios set to 1.55 and my multimeter is reading 1.606.Quote:
Originally Posted by ManagHead
???:confused: if p5b de=p5b dh de=p5b=p5wdh=all ws proQuote:
Originally Posted by Onepagebook
hmm i can do the all mods of all mobos in p5w64 ws pro:cool: or some mobo else?
sorry for the english:(
Is there eny program to see mem voltages after Vmem mod, or I must do it vith my bear hands and votmeter
asus ai suite it is on the cd but there is a new one (less than a week old) on the website.
any southbridge vcore mod????
My limit is sb vcore...
Help me plz!!!
soooo anybody wanna do the vcore and vdroop for me?
i can do it for a price. pm me.
Zhangmaster..where are you based?
T07N..I`ll do your avatar for free :p:
does this pencil mod voids the warranty?Quote:
Originally Posted by OnDborder
i mean if something happens i can erase the pencil so nobody can see it! :woot:
after all vdroop makes the motherboard more stable
Quote:
Originally Posted by karateo
You can erase it easily with a pencil rubber ;)
thanks :D
So for 1000% shure the mods are the same for the p5b-e ??
I'm not sure my friend ;)Quote:
Originally Posted by |-jokker-|
But it must be. I think.
what type of pencil do i use for hicookie's vdroop mod on the 1st page?
Anyone has the vSB mod?
zhangmaster12: something with low resistance.
How many Ohms would be 100% neutralizing the vDroop, but not anything extra?
does asus p5b-e plus have same mods like p5b deluxe ?
so a number two pencil will work?
and this mod workd on all p5b deluxes right?
i gotta be causous, dont wanna waste 150$
screw it, im gonna solder it. can i use this VR?
http://www.alliedelec.com/Search/Sea...C0&Ntk=Primary
why does it have three leg things?