all i have to say is :rocker: :rocker: :rocker: to that vdimm :eek:
Printable View
all i have to say is :rocker: :rocker: :rocker: to that vdimm :eek:
Quote:
Originally Posted by hipro5
Posible or not this board can run higher FSB 470 with Vmch mod ?:toast: :toast:
If with the new BETA bios ABIT has solve the 460MHz wall issue, I think yes....I even try 2.2VMCH but 460MHz wall was there......I'll test with the new BETA bios to see if it's OK now or not...;)Quote:
Originally Posted by Hazzan
One friend bought one retail AW9 max and told me that can do 481fsb with the latest bios but only 461fsb stable fot 1m pi..:)
Yes I've changed from ASUS P5WDH-Deluxe to ASUS P5B-Deluxe and to ABIT AW9D-MAX with no problem....Install Intel inf firstly....;) :)Quote:
Originally Posted by Pjoeloe
just curious, have the sticks degraded any after running them at 3.4v so much? :D
thanks, yes, I heard the news also from opb, so that`s greatQuote:
Originally Posted by hipro5
as far as i know he was playing with 3.5v and the sticks havent been the same since.Quote:
Originally Posted by ozzimark
HiPro5 PLEASE BY SOME WATER FOR YOUR RAM :)
http://www.mips-computer.de/sg_WATER..._RAMCOOLER.htm
Hmmmm... P5W64 or AW9DMAX??
Still depends on getting a cherry, though...
My P5W64 stopped at 430.
difficult decision indeed... my MAX maxed out @ 420...
maybe becasue i turn too fast?! hahahaQuote:
Originally Posted by hipro5
2.8v direct to can't read (3 turns)! !! i think that is 3.3v but not sure....
i was tring to lower the voltage.....
For who are in doubt about Cellshock 6400 here you have some nice pics:
3-3-3-8:
http://img213.imageshack.us/img213/2999/490cw8.png
3-4-4-8:
http://img208.imageshack.us/img208/8996/571eb6.png
http://valid.x86-secret.com/show_oc?id=131594
4-4-4-12:
http://img183.imageshack.us/img183/6741/575na2.png
From 3-4-4-8 to 4-4-4-12 only a gain of 3MHz... looks like something is limiting me at 575MHz fsb. :slapass:
Just a quick 1M Spi test @ 3-4-4-4 with E6600 @ 4683MHz Stock Vapochill LS Cooled:
http://img213.imageshack.us/img213/6870/10984st9.png
Vmem used:
http://img213.imageshack.us/img213/8958/vmemet6.jpg
Looks like 6400 kits have D9GKX. I dont know because i didnt taked off the heatspreaders but this kit is making same results of my other two Cellshock 8000 CL4 kits.
Vmem @ 2.72v and just one 92mm fan giving them some air and it was cold. :D
I believe that this babies can go to 600MHz @ 4-4-4-12. Just need to find what is blowing @ 575fsb.
Congratulations Cellshock. This was really :woot: mems! :clap:
very nice lasac
;)
insale clocks for 2x1GB :eek:
Why dont you use mem dividers?
Here is what chips Cellshock is using according to one of its employees:
Do you have the possibility to test the same sticks on a 975X board?Quote:
DDR2-800 CL4 - Micron D9GMH
DDR2-1000 CL5 - Micron D9GMH/D9GKX
DDR2-1000 CL4 - Micron D9GKX
Did you buy the stick from a shop or did you request them from Cellshock?
Buy them at shop.
I know that Cellshock have D9GMH on 6400 sticks but these 6400 sticks performs like D9GKX.
When I have more time i will fully test them. ;)
Now some tests with low voltage:
http://img216.imageshack.us/img216/2557/dsc01429we5.jpg
4-4-4-12:
http://valid.x86-secret.com/show_oc?id=131854
3-4-4-4:
http://valid.x86-secret.com/show_oc?id=131894
3-3-3-8:
http://valid.x86-secret.com/show_oc?id=131899
3-3-3-1:
http://valid.x86-secret.com/show_oc?id=131898
Tomorrow i'll try to spend some time trying higher mem multi to discover the max fsb @ 4-4-4-12 2.72v
I have finally found some DDR2 that I really want but its as rare as hens teeth in AU :slobber: :rolleyes:
you can also find some GKX on 800 ;)
lets call it special-christmas edition (or whatever you like)... watch out for batch: 1.09196.95.360 and 1.09256.97.360 :)
Alonso are you working for cellshock now?
Yeah he was the twinmos 'new bh-5' guy previously isnt he?Quote:
Originally Posted by Revv23
u both are absolutely right ;)
Alonso why not have a Cellshock support forums here :D there are many cellshock users on XS :toast:Quote:
Originally Posted by Alonso
plse give us some more time - until then i will do my best to support you as good as i can in the specific threads ;)