The Official Opteron 939 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

10-04-2005, 04:25 AM
gundamit

You might be waiting a while. I think the first small wave that hits the retail channel will either be spoken for (pre-orders/back-orders) or scooped up very quickly. I doubt AMD has scheduled high volume production, especially since it sounds like this stuff sat for weeks after they were available. Retailers may have seen it solicited by AMD but didn't bother to carry it since most of their customers are end-users, not corporate giants. When/if retailers start pushing for more AMD may re-evalutate the Opterons position in the marketplace and price accordingly.

Uhhh ... what was the question again? Oh yes ... I'd go ahead and get a cheap Venice and keep an eye out for Opterons. :)
10-04-2005, 04:25 AM
Le_Petit_Lapin

Anyone know when these stop being on Pre-Order in the UK?
10-04-2005, 06:01 AM
Shark-357

I just orderd me a 146 :p: i should get it in a week or two :slobber:
10-04-2005, 08:04 AM
gbomb944

Other than the cache it'll be a stretch for it to beat your venice. Is that a fully stable 2900?
10-04-2005, 09:53 AM
b|gf|sh

Quote:

Originally Posted by Le_Petit_Lapin

Anyone know when these stop being on Pre-Order in the UK?

Appears the 148's in stock already :cool:

http://www.cpucityshop.co.uk/product...248cdccacacf5d
10-04-2005, 10:31 AM
Ferry82

These Opteron cpus suck BIG time!!!!.

second boot @ 2900 with 1.39vcore on XP120 with papst @1000rpm

Still trying.
10-04-2005, 10:33 AM
BioPC

Today i ordered a boxed opti 144 from a german store, 163€ shipped, which i will probably receive next week.
Has somebody already seen poor overclocks?, lets say under 2,8Ghz?
Results to come...(i hope i'm lucky as you mates) ;)
10-04-2005, 10:56 AM
mongoled

Quote:

Originally Posted by Ferry82

These Opteron cpus suck BIG time!!!!.

second boot @ 2900 with 1.39vcore on XP120 with papst @1000rpm

Still trying.

Sure do!! Im only priming @ 290x10 with XP90+low speed 90mm fan with 1.44v

:D
10-04-2005, 11:05 AM
Ferry82

Does anybody now if these opterons have a burn in period because i cant boot @ 3000mhz :(

As5 is also fresh do you guys think this Opteron is gonna suck some more?
10-04-2005, 11:14 AM
ben805

Quote:

Originally Posted by Zeus

Something is holding me back, don't know what yet, without getting any signs of instability in SuperPi or anything i just get this wierd BSOD.

In other words, i have some work to do. :D

:)

I'm willing to bet the IHS is holding you back, take it off and try again :D :D :D
10-04-2005, 11:22 AM
mongoled

Quote:

Originally Posted by Ferry82

Does anybody now if these opterons have a burn in period because i cant boot @ 3000mhz :(

As5 is also fresh do you guys think this Opteron is gonna suck some more?

Well I can answer your question in a few minutes, im going to go for my first 3Ghz boot. Ive just finished a OCCT test on my computer at 2900mhz (290x10) with 1.44v.

Just going to update my thread then will push for max superPi clocks
10-04-2005, 11:22 AM
xenolith

Quote:

Originally Posted by Ferry82

Does anybody now if these opterons have a burn in period because i cant boot @ 3000mhz :(

As5 is also fresh do you guys think this Opteron is gonna suck some more?

At what vcore? Increase it a little and see what happens.
10-04-2005, 11:46 AM
Ferry82

Now priming @ 2.9 1.4ghz but i tried to boot at 3000mhz with any voltage till 1.5v i think i have a heat problem.

maybe i just must wait till as5 is settelt.(i am only playing with this cpu for 2hours now)
10-04-2005, 12:22 PM
mongoled

Well I can boot at 3.0ghz run superPi 1M and thts abt it. Thts using 1.49v. The temps start going up quite alot.

Going to update my thread....
10-04-2005, 12:27 PM
Zeus

Quote:

Originally Posted by ben805

I'm willing to bet the IHS is holding you back, take it off and try again :D :D :D

Your gonna lose money on that one mate. :D
It's not giving signs of instabilty, i can do SuperPi32M at 3070MHz but above that speed it just reboots or gives BSOD: TRAP_CAUSE_UNKNOWN

Maybe i have to raise preamble or something.
It's not the RAM, a divider results in the same scenario. :(

I will figure it out, might be a bios issue.

ATM i'm not unhappy with 3070MHz. :)

Ferry82, i can do SuperPi1M at stock voltage at 3GHz, i must have gotten the better of the 2. :D
The PSU i bought from you helps big time!! :D
10-04-2005, 12:48 PM
Absolute_0

Quote:

Originally Posted by mongoled

Well I can boot at 3.0ghz run superPi 1M and thts abt it. Thts using 1.49v. The temps start going up quite alot.

Going to update my thread....

Don't forget to do a lot of burn in while the chip is still new. It seems like a lot of you guys aren't burning in much... but i've heard from at least one person that burn in is helping a lot! maybe it was gundamit.
10-04-2005, 01:00 PM
gundamit

Nope not me. Didn't burn my chips in as much as I burned myself out. :D
10-04-2005, 01:02 PM
mongoled

Quote:

Originally Posted by Absolute_0

Don't forget to do a lot of burn in while the chip is still new. It seems like a lot of you guys aren't burning in much... but i've heard from at least one person that burn in is helping a lot! maybe it was gundamit.

Yup, indeed sir you are correct

:)

I will be going to bed very soon, just trying to work out the lowest voltage to leave CPU running at 280x10 with CPU Burn-In running all night, im trying out 1.325v in the bios, lavalys tells me my voltage is 1.3v.

CPU is at 42C while doing this, hopefuuly it wont crash while I am sleeping
10-04-2005, 01:32 PM
dogsx2

A 3200 venice on air doing 300x10 is rare, I think I may have seen a few posts at that speed. For that matter any venice doing 3000MHz on air is very rare so there's not much to compare.
10-04-2005, 01:36 PM
Ferry82

Quote:

Originally Posted by Zeus

Your gonna lose money on that one mate. :D
It's not giving signs of instabilty, i can do SuperPi32M at 3070MHz but above that speed it just reboots or gives BSOD: TRAP_CAUSE_UNKNOWN

Maybe i have to raise preamble or something.
It's not the RAM, a divider results in the same scenario. :(

I will figure it out, might be a bios issue.

ATM i'm not unhappy with 3070MHz. :)

Ferry82, i can do SuperPi1M at stock voltage at 3GHz, i must have gotten the better of the 2. :D
The PSU i bought from you helps big time!! :D

I think your forgetting that your on Watercooling.
I am going back on watercooling soon and i think it will help me bigtime.

Nice too hear your happy with the PSU :toast:
10-04-2005, 01:37 PM
Zeus

1 Attachment(s)

Did another 32M run:

http://www.xtremesystems.org/forums/...id=38116&stc=1

:D
10-04-2005, 01:47 PM
mongoled

Quote:

Originally Posted by Zeus

Did another 32M run:
:D

Fantastic run

:toast:

Hopefully tomorrow night I will be joining you with WC, wht is your TMaxCase?
I will be burning-in tonite using CPU 'Burn-In'

280x10/1.3v

temps at the moment 43C,
10-04-2005, 01:47 PM
Damien

wooooo just sent my payment for an Opteron 146, can't wait to get it!
10-04-2005, 02:00 PM
delas52

How do these compare to fully oc'd venice's? FOR GAMES AND BENCHIES?
10-04-2005, 03:14 PM
Eljefe62

Maybe Vandi's got too many responses, I haven't heard anything in a while now. Anyone else finding these anywhere online?
10-04-2005, 03:50 PM
dogsx2

Zeus

are you using air or water?
10-04-2005, 04:00 PM
VulgarHandle

144's and 146's at www.tritechcoa.com
10-04-2005, 04:08 PM
delas52

Those arn't in stock, I called them.
10-04-2005, 04:12 PM
VulgarHandle

fine, www.tankguys.biz

EDIT: dang, not there either, bah, tired of sites listing them as available and not....
10-04-2005, 05:13 PM
asianguy80

http://www.supload.com/thumbs/default/maxstable7.JPG

Well I dropped to the 9x multi and got a higher max HTT but my temps went way high during my 8m run. 52C maxed out during the middle of the run. that is with 305HTT w/ 5:6 divider on the ram. I think i'm topped out right now. the ambient room temp isnt too high either. I think it's still pretty good for a MSI board lol vs all your DFI'ers. I'll give it another go later tonight when it's colder and see how it goes but burning in would maybe yeild better results. I think I might just sell this chip and revert back to my sandy.
10-04-2005, 06:57 PM
Vandi423

Hehehe Pr0n

http://img143.imageshack.us/img143/5...pterons1fb.jpg

They all left me though. :(
10-04-2005, 07:00 PM
Confused_User

:(

When will you be getting more in?
10-04-2005, 07:09 PM
delas52

holy isht dude. You have any idea of an ETA for most stores?
10-04-2005, 07:29 PM
gundamit

Quote:

Originally Posted by Vandi423

Hehehe Pr0n
They all left me though. :(

Lol. Nothing like teasing the XS members who have already been whipped up into a frenzy. :p: Hopefully headed to XS members. :up:
10-04-2005, 07:30 PM
Damien

Quote:

Originally Posted by Vandi423

Hehehe Pr0n

http://img143.imageshack.us/img143/5...pterons1fb.jpg

They all left me though. :(

So I sent the money for a 146 you don't have? =\
10-04-2005, 07:42 PM
Vandi423

Quote:

Originally Posted by gundamit

Lol. Nothing like teasing the XS members who have already been whipped up into a frenzy. :p: Hopefully headed to XS members. :up:

All for XS members. :D

I am curious to see what happens because I got to see all of the serial #s. We shall see if there really is a difference.

To anyone who PMed me please give me some time. I will try my best to respond to everyone but when you get 1000+ PMs in a few days its gets pretty hard to do. I had an Economics Midterm today so that didn't make things any easier. :(
10-04-2005, 07:46 PM
Damien

Anyone wanna drop their order so I can get one? =P
10-04-2005, 07:48 PM
Lithan

Tankguys has suggested to me that they will have them sometime between now and the 13th. They didn't want to make any promises so they indicated that the 13th was a conservative estimate, it could be sooner.
10-04-2005, 08:00 PM
Deus Falsus

Question,

Do these opterons have issues running with a memory divider like some venice, I've seen a lot of superpi32m screens but how do they fare in 3dmark2k1 and how long can they hold a loop?
10-04-2005, 08:52 PM
charlie

Quote:

Originally Posted by Vandi423

Hehehe Pr0n

http://img143.imageshack.us/img143/5...pterons1fb.jpg

They all left me though. :(

OMG
10-04-2005, 09:22 PM
wickedld9

Quote:

Originally Posted by Vandi423

All for XS members. :D

I am curious to see what happens because I got to see all of the serial #s. We shall see if there really is a difference.

To anyone who PMed me please give me some time. I will try my best to respond to everyone but when you get 1000+ PMs in a few days its gets pretty hard to do. I had an Economics Midterm today so that didn't make things any easier. :(

The masses...they have overrun Vandi. :( Seriously, the word is out and since no one can find them, they are beating down your inbox. BTW, I just sent you a PM, I hope you can find it. :D
10-04-2005, 09:45 PM
ArcTan

Quote:

Originally Posted by charlie

OMG

yeah if I had that many, I'd test them all and keep the best one or two and sell the rest :D
10-04-2005, 10:02 PM
Zeus

Quote:

Originally Posted by dogsx2

are you using air or water?

Watercooling.
BI microII-AquaXtreme Z50-RBX
Still need to mount my Weapon heatercore/shroud. :)
10-04-2005, 10:08 PM
Jupiler

Zeus :

where did you get your 146? Alternate?
10-04-2005, 10:12 PM
Zeus

Yes, they had 2 in stock monday, they're both gone. ;)
10-05-2005, 02:19 AM
Dave_Sz

Quote:

Originally Posted by afireinside

Lower works better? Ok I'm really confused now.

BTW use orange slots for BH5 :)

Yeah, no, both work fine with BH5, actually the yellows are for higher volts, ask the people who dsigned the boards. It depends on the bios as well of course.
I just bought 4 venice chips and now I want this so bad.
10-05-2005, 03:00 AM
dogsx2

Tcc5???

Anyone using TCC5 please post your oc results and tweaker ss.
10-05-2005, 03:07 AM
BioPC

Quote:

Originally Posted by dogsx2

Anyone using TCC5 please post your oc results and tweaker ss.

I haven't seen it with TCC5 yet but sure i will post my results as soon as i get my opti 144 in a week.
If i'm able to push the memory as high as my winnie allowed i will be very happy, then i will manage easier the max multi, cause my winnie is crap :)
10-05-2005, 03:16 AM
dogsx2

Quote:

Originally Posted by BioPC

I haven't seen it with TCC5 yet but sure i will post my results as soon as i get my opti 144 in a week.
If i'm able to push the memory as high as my winnie allowed i will be very happy, cause then i will use max multi :)

I think there is a problem with TCC5. I got a new mb and still have the same problem. I'd like to see someone else run TCC5 in dc above 250.
10-05-2005, 03:17 AM
Sinnerman49

Quote:

Originally Posted by Vandi423

Hehehe Pr0n

http://img143.imageshack.us/img143/5...pterons1fb.jpg

They all left me though. :(

Oooo! Oooo! I see mine! :woot:
10-05-2005, 03:33 AM
BioPC

Quote:

Originally Posted by dogsx2

I think there is a problem with TCC5. I got a new mb and still have the same problem. I'd like to see someone else run TCC5 in dc above 250.

How high did your TCC5 go with your older cpu?
If 250Mhz if highest you can get then you made me worried. :(
Have you tried 702 or 704-BT(A) bioses?
10-05-2005, 05:49 AM
WesM63

w00t my 144 is on its way. Should be here tomorrow :)
10-05-2005, 05:55 AM
Sinnerman49

Just got tracking information for my 146! Should be here tomorrow as well!
10-05-2005, 08:18 AM
afireinside

Quote:

Originally Posted by Vandi423

Hehehe Pr0n

http://img143.imageshack.us/img143/5...pterons1fb.jpg

They all left me though. :(

:slobber:

Good thing I got mine early :D

WesM I haven't seen you around in a while... Good luck with the 144 man!
10-05-2005, 08:27 AM
sponge bob

i ordered 144 opty? how bad they are compared with 146?
10-05-2005, 08:40 AM
WesM63

Quote:

Originally Posted by afireinside

WesM I haven't seen you around in a while... Good luck with the 144 man!

I know i've been busy. To much work and playing with the car. Feels good to be back thou. Crazy thing is, i didn't even put this winny thru its paces and now i'm buying a opty lol.

Sponge bob,
*scratches head* Most of this thread was about 144's. I'll be happy with a stable 2.9ghz, althou 3ghz is my goal ;)
10-05-2005, 08:58 AM
Damien

so what are the steppings everyone with 144's have? VPAW?
10-05-2005, 09:47 AM
Vapor

Most others have APMW for both the 144s and the 146s....
10-05-2005, 09:51 AM
Ferry82

Quote:

Originally Posted by Ferry82

Now priming @ 2.9 1.4ghz but i tried to boot at 3000mhz with any voltage till 1.5v i think i have a heat problem.

maybe i just must wait till as5 is settelt.(i am only playing with this cpu for 2hours now)

Ok 3000mhz is now stabil on 1,45vcore :banana:
10-05-2005, 09:54 AM
pezskwerl

Quote:

Ok 3000mhz is now stabil on 1,45vcore

what was the problem?
10-05-2005, 01:16 PM
dogsx2

Quote:

Originally Posted by BioPC

How high did your TCC5 go with your older cpu?
If 250Mhz if highest you can get then you made me worried. :(
Have you tried 702 or 704-BT(A) bioses?

305MHz-yes, I've tried many bois
10-05-2005, 01:36 PM
Repoman

Hey guys, sorry if this has been posted already, I can't be bothered to read through the whole thread. But Dual core 939 Opterons apparently will be available in the near future :eek:

http://www.tankguys.biz/opteron-dual...et-p-1424.html

Pretty damn expensive, but it will probably go down and if they OC like the single core, it'd definetly be worth it :) Depending on preliminary results, I may be selling my X2 3800
10-05-2005, 01:53 PM
igor0203

I have one suggestion that someone could make a new thread for collecting steppings of those Opterons?
10-05-2005, 02:00 PM
dinos22

Quote:

Originally Posted by igor0203

I have one suggestion that someone could make a new thread for collecting steppings of those Opterons?

funny that there are only two steppings that i've come across so far

144, 146-----0530APMW...........looks like us Aussies are getting these as well
150------0534SPMW
175------0534SPMW
10-05-2005, 05:06 PM
187(V)URD@

Opteron 144 CABNE 0536 VPAW (from computersmsa)
10-05-2005, 05:11 PM
Eljefe62

So how's the 0536 doing?
10-05-2005, 05:29 PM
eshbach

quick shot on single stage... very odd chip in response to temperature/voltage changes...

http://valid.x86-secret.com/show_oc?id=41898
10-05-2005, 05:36 PM
dinos22

Quote:

Originally Posted by eshbach

quick shot on single stage... very odd chip in response to temperature/voltage changes...

http://valid.x86-secret.com/show_oc?id=41898

is that the 0536 chip mentioned above your post....nice clocks
10-05-2005, 05:42 PM
eshbach

Quote:

Originally Posted by dinos22

is that the 0536 chip mentioned above your post....nice clocks

no mine is the 0530.

it will go under cascade friday.
10-05-2005, 05:51 PM
asianguy80

Quote:

Originally Posted by Vandi423

Hehehe Pr0n

http://img143.imageshack.us/img143/5...pterons1fb.jpg

They all left me though. :(

hey look there's my 146...now its in my hands lol i have a 2nd 146 i'm testing out.

Funny thing the first 146 i got from vandi was batch # 50114 and this new one is 50027 closer to 0 and i got it later we'll see how it goes. i'm gonna sell the one that doesn't clock as well :p:
10-05-2005, 06:22 PM
Welz

these optys are lookin nice, keep it coming :D
10-05-2005, 06:38 PM
Vandi423

Quote:

Originally Posted by asianguy80

hey look there's my 146...now its in my hands lol i have a 2nd 146 i'm testing out.

Funny thing the first 146 i got from vandi was batch # 50114 and this new one is 50027 closer to 0 and i got it later we'll see how it goes. i'm gonna sell the one that doesn't clock as well :p:

Man, you got it in 1 day? Next day shipping? I sent all of them on Tuesday because I got all of them at 2:20pm PST Tuesday 10-4-05. Only had about 2 hours to ship them all. :eek:

EDIT: Cool, I guess people in CA got them today. More posts to come. I'll be looking for Major's Opteron. :D
10-05-2005, 07:17 PM
dinos22

Quote:

Originally Posted by Vandi423

I'll be looking for Major's Opteron. :D

heheheheh i knew he was getting some.....he is hooked....let's see if Opteron can improve those 2GB kit speeds :)
10-05-2005, 08:09 PM
asianguy80

Quote:

Originally Posted by Vandi423

Man, you got it in 1 day? Next day shipping? I sent all of them on Tuesday because I got all of them at 2:20pm PST Tuesday 10-4-05. Only had about 2 hours to ship them all. :eek:

EDIT: Cool, I guess people in CA got them today. More posts to come. I'll be looking for Major's Opteron. :D

Yup I heard the mailman come and I was waiting in anticipation already lol bastard came at 4pm :slapass: usually he gets here around 3 but his lazy ass is slacking lately who cares i got mine LOL
10-05-2005, 08:19 PM
gundamit

Quote:

Originally Posted by dinos22

heheheheh i knew he was getting some.....he is hooked....let's see if Opteron can improve those 2GB kit speeds :)

Major is sitting at #2 on the 2gig stickied thread at 300HTT 1:1 with his FX-57. Long odds on his Opteron having a better memory controller, but it would be great to see a side by side comparison with both the CPUs running 300x10. :)
10-05-2005, 08:39 PM
dinos22

Quote:

Originally Posted by gundamit

Major is sitting at #2 on the 2gig stickied thread at 300HTT 1:1 with his FX-57. Long odds on his Opteron having a better memory controller, but it would be great to see a side by side comparison with both the CPUs running 300x10. :)

i know but MM didn't give it any chilly temps....i think he'll squeeze a few more MHz out of the memory controller under colder conditions.....too bad MM is selling his stuff.....i guess we'll see what happens on Major's rig :D
10-05-2005, 09:34 PM
Ferry82

Quote:

Originally Posted by pezskwerl

what was the problem?

Just burning in i guess :stick:
10-05-2005, 10:50 PM
bokis

Four sticks?

Anyone tried four sticks of (bh-5) 512mb :toast2:
10-05-2005, 11:27 PM
HermS

Quote:

Originally Posted by igor0203

I have one suggestion that someone could make a new thread for collecting steppings of those Opterons?

Opteron 148 CABNE 0528 GPMW here, results to come later.
10-06-2005, 01:43 AM
groovetek

Quote:

Originally Posted by dinos22

funny that there are only two steppings that i've come across so far

144, 146-----0530APMW...........looks like us Aussies are getting these as well
150------0534SPMW
175------0534SPMW

dinos man... what source of information tells you this???

i really would like to hope we get the 0530APMW stepping as well, but i'd hate to get my hopes up unless there's some solid evidence we'll be getting some decent chips...

i'd actually be disappointed with a 2.9ghz chip... i'm looking to get at least 3ghz stable for 24/7 use...
10-06-2005, 01:58 AM
Perc

Quote:

Originally Posted by dinos22

i know but MM didn't give it any chilly temps....i think he'll squeeze a few more MHz out of the memory controller under colder conditions.....too bad MM is selling his stuff.....i guess we'll see what happens on Major's rig :D

no major sold me the cpu he wont even get to use it. but dont worry ill run it under the phasechange and post all my results :)

peace perc.
10-06-2005, 02:47 AM
Ferry82

Please make some pics.
10-06-2005, 03:13 AM
Pt1t

pic of 50 opteron is nice :D
10-06-2005, 03:20 AM
187(V)URD@

http://home.scarlet.be/~pascpiet/DV/..._0536_VPAW.jpg
http://home.scarlet.be/~pascpiet/DV/..._0536_VPAW.jpg

Pictures from computersmsa :slap:
10-06-2005, 03:21 AM
Pt1t

lol , too big :D
10-06-2005, 03:33 AM
Waxman

This is what I got with my 146 0530APMW for 24/7:

http://www.pcdiga.com/PCDIGA/Outros/cpu-3000.bmp

That's watercooled.

It's not that bad :D
10-06-2005, 04:27 AM
dinos22

Quote:

Originally Posted by groovetek

dinos man... what source of information tells you this???

i really would like to hope we get the 0530APMW stepping as well, but i'd hate to get my hopes up unless there's some solid evidence we'll be getting some decent chips...

i'd actually be disappointed with a 2.9ghz chip... i'm looking to get at least 3ghz stable for 24/7 use...

the first 146 CPUs delivered are 0530APMW...fingers crossed the rest of them would be the same

groove my man you've orders how many chips again 2,3,4....surely one of them will be a 3GHz 24/7 one......but you and I know that 1MB cache gives a boost so even if it's a 2.9GHz stable you are still going to have a quicker chip than your Venice........once you pop the IHS you are looking even better for a 3Giga :D
10-06-2005, 04:28 AM
dinos22

Quote:

Originally Posted by Perc

no major sold me the cpu he wont even get to use it. but dont worry ill run it under the phasechange and post all my results :)

peace perc.

very much looking forward to this post :)
10-06-2005, 05:59 AM
WesM63

Quote:

Originally Posted by WesM63

w00t my 144 is on its way. Should be here tomorrow :)

Just found out my ETA has been pushed back till 10/10. (monday)
10-06-2005, 06:04 AM
Justinkoko

where can i order it officially/unofficially?

links please!

US buyer
10-06-2005, 06:07 AM
koosjebram

Any results for the Opteron 144 CABGE 0536 VPAW ????????
10-06-2005, 06:37 AM
foofreaknfighte

I am hunting for a 144, 146, or 148 if anyone has a lead....

Need one!
10-06-2005, 06:50 AM
koosjebram

Read previous page :p:
10-06-2005, 07:36 AM
HermS

3 Attachment(s)

Today I finally got to play around with my 148. :cool:

I didn't mess around with the stock cooling and stuck it straight under my Prommie. I had some major headaches as this is the first time I've needed to use dividers to achieve my maximum overclock, but after checking up on one of eva's divider guides I got it running nicely. Changing Max Async Latency to '9' made a world of difference.

I've only been checking Super Pi 1m so far but here's a brief rundown of what I've managed:-

1.450v - 298 x 11 (5:6) 3280MHz
1.475v - 302 x 11 (5:6) 3322MHz
1.500v - 305 x 11 (5:6) 3355MHz
1.525v - 308 x 11 (5:6) 3396MHz
1.550v - 311 x 11 (5:6) 3421Mhz

Thats as far as I've pushed it and still haven't tightened up the timings yet.

Edit : fixed link - thanks wes
10-06-2005, 07:39 AM
WesM63

Nice Clocks!

btw, ur last pic doesn't work. (3421mhz)
10-06-2005, 09:44 AM
socrilles

If we really want to know what the silicon being used with these chips is, I think the first five letters of the second line indicate it. When people were buying the mobiles these first five letters were the same as the FX53's and people were getting similar clocks (I love my 3000+ DTR) both were CAA2C. I have seen a pic of an FX57 w/ CABCE, and the opterons have CABGE so pretty close and might mean same assembly line/silicon

Edit:

It appears as those the 3700+ and 4000+ are CABGE, while the FX's are CABCE, so it seems more likely these are the same as 3700+ and 4000+ and not the FX
10-06-2005, 09:57 AM
ozzimark

SILICON! no e

but anway, i agree with you. the stepping (CABNE, CABGE, etc etc) probably has a lot to do with the mask used, which production line, transistor type, maybe even wafer quality?
this probably has a pretty large effect on how the chip is going to perform, excluding random defects and such.
10-06-2005, 10:39 AM
Naasar

i just ordered my 146 ......should be here sometime by the end of the month :(

whats the best s939 cooler on the market? xp90 or 120...or the big typhoon :confused:
10-06-2005, 10:52 AM
computersmsa

Code:

Opteron 144 CABGE 0536 VPAW DFI nF4 Ultra-D 702-2BTA Puit Cooling -> Full = ~ 35°C Max Stable -> 2729 MHz @ 1.49V

http://home.scarlet.be/~pascpiet/DV/...W_MS@1.49V.png
10-06-2005, 10:55 AM
Vapor

The first 146s and 144s were CABNE 0530APMWs and the newer ones (148 included) seem to be CABGE 0536VPAWs, so we really have no way to tell what is responsible for any differences in OCability as there isn't any similarity in the steppings (i.e., CABGE vs CABNE comparo would need all else equal while the converse is the same).

EDIT: computersmsa....that's a slightly dissappointing result :(
What exactly is puit cooling? Stock? Have you tried loosened preamble?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 07:57 PM.

XtremeSystems