The Official X2 Overclocking Thread (Please Post Your OC's)

Uhh...where are the AM2's.....?:rolleyes:

I can get my chip to 2.75, 110% vid special, stable.

Any bit higher and it just poops.

X2 3800+ Toledo WR http://valid.x86-secret.com/show_oc.php?id=315713

Cooling: Dice "light" (only used a LITTLE bit so I could get the temps down to about 5c). Pretty safe vcore (below 1.8v), so 3.6 will be broken someday. I just don't want to kill this thing with too much voltage. I have owned 150 AMD K8 CPUs, and this is the one I love the most:D Even if it's not the best.

With IHS off it can do 3g/1.29v stable on water.

PS: This exact chip had the WR before Jannn "stole" it:p:

Quote:

---

Originally Posted by bf2142lol

Uhh...where are the AM2's.....?:rolleyes:

---

Just thinking that, dam 939s are showing the AM2s up. Maybe I should get my socket 939 3000+ out and test that again since I am better at overclocking now from when I played with that one ;]

Anyway here is my "Amd x2 4000+ AM2" http://valid.x86-secret.com/show_oc.php?id=314851


Dropped my Ram to 400mhz anything higher and it can't even hit 2.6Ghz
CPU voltage on 1.555v
Ram Voltage to 2.2v

CPU:
Idle 35*C
Load 40*C (Which is weird IMO)

Motherboard:
Idle: 50*C
Load: 65*C

There is a CPUz memory/main screenshot
http://s178.photobucket.com/albums/w245/Riore/CPUz.jpg

I am a novice but I think a 33% overclock is rather good for me : p
(Any tips are greatly appreciated)

Well, this is the end :)

http://img90.imageshack.us/img90/9853/cpumax1vj6.th.jpg

can anyone help me go farther, i wanna shoot for at least 3.5??? but im on air so might be hard? tell me what you think?

http://img.techpowerup.org/080225/result108.jpg

needs more Jiggawatts

how does 1.21 Jiggawatts sound :shrug: :yepp:

but seriously whats a safe number to go with and what temp should i try not to go over
i read they can handle 1.55 ok but not to go over 60c
does this sound correct

http://img339.imageshack.us/img339/5...qdsdyq4.th.jpg

Ill do CPU-Z validation soon as i get home today.

Athlon 64 3600+ X2 Socket939 @ 2.85Ghz IDLE (load will crash it) 25'c bowth cores.

Cooled by Sunbeam Silent Whisper (crappy cooler).

Quote:

---

Originally Posted by Riore

Just thinking that, dam 939s are showing the AM2s up. Maybe I should get my socket 939 3000+ out and test that again since I am better at overclocking now from when I played with that one ;]

Anyway here is my "Amd x2 4000+ AM2" http://valid.x86-secret.com/show_oc.php?id=314851


Dropped my Ram to 400mhz anything higher and it can't even hit 2.6Ghz
CPU voltage on 1.555v
Ram Voltage to 2.2v

CPU:
Idle 35*C
Load 40*C (Which is weird IMO)

Motherboard:
Idle: 50*C
Load: 65*C

There is a CPUz memory/main screenshot
http://s178.photobucket.com/albums/w245/Riore/CPUz.jpg

I am a novice but I think a 33% overclock is rather good for me : p
(Any tips are greatly appreciated)

---

Youv'e a G1 revision, they tend not to OC very well.

@ Jbunch07; 1.55V on air should be cool if you've good air cooling like me. However if you notice no further improvement no matter the Voltage it's the CPU running on its edge, nothing to do about unless you get some subzero cooling (or maybe watercooling, but from what I read it doesnt give that much of a boost anymore).

I used a OCZ Vendetta first. 1.5V 3.4Ghz was the wall at 57C load, then bought Thermalright Ultra Extreme 120 and now I run 1.475V 3.52Ghz at 50C load.

heres how far ive gotten my 6400+ , although this isnt 24/7 settings i can only run 3.5 24/7
=http://valid.x86-secret.com/show_oc.php?id=325408

here's mine: http://valid.x86-secret.com/show_oc.php?id=327300

4800+ Brisbane @ 3.0Ghz. CPU Voltage is 1.376 (+0.112), chipset is stock. RAM is at 500Mhz. Runs like this 24x7 for rosetta@home and gaming.

http://valid.x86-secret.com/show_oc.php?id=326096

x2 3800 lcbie 0619 rpmw @ 3224MHz on air with 1.7v.

stable at 3.0GHz with 1.54v I think (from memory)

i used to run it at just 2.75GHz on default vcore due to poor cooling. I stuck a delta screamer on my artic cooling freezer 64.

http://img3.freeimagehosting.net/uploads/71197620b8.jpg

http://aycu21.webshots.com/image/481...4834788_rs.jpg

http://valid.x86-secret.com/show_oc.php?id=337734

http://valid.x86-secret.com/show_oc.php?id=345748
DFI 790FX-M2R AMD 6400BE+ @3600 1.45 V

Nice Clocks ... 3.6GHz. ;)

I can only dream of such speeds... I managed to goto 2.9GHz with a X2 3800+ but anything above it becomes unstable.

3.345ghz ~1.55v 5000BE and MSI K9A platinum
http://valid.x86-secret.com/show_oc.php?id=350496

AMD X2 4200+ Windsor BH-F2 @ 10*250MHz ~ 1.264V (default voltage) with stock cooling.
24/7 prime stable.:)

Not much, not extreme, but just enough 4 me! (after E8400@4GHz, a bit slower, i know..)

Suicide shot 3510MHz 1.5 Vcore on my 5200+ windsord. Stable in one core 50% load; at 100% system crashed
http://valid.x86-secret.com/show_oc.php?id=341731
For 24/7 3360MHz works perfect at 1.36Vcore DDR 1126

BH-G2, 1.35V, ASUS Silent Knight II (max 44˘C)

http://valid.x86-secret.com/show_oc.php?id=351837

Can OC to:
11.5 x 255Mhz
11 x 266Mhz
10 x 290Mhz

Further testing on higher V soon. :)

5000+ BE lazy OC only...
http://valid.x86-secret.com/show_oc.php?id=346688

Quote:

---

Originally Posted by fuzore

5000+ BE lazy OC only...
http://valid.x86-secret.com/show_oc.php?id=346688

---

Crank it up! :D

My subzero X2

I had almost forgotten how fun it is to overclock AMD cpu's.

Brisbane'G2' @3236mhz --> 431*7.5
http://valid.x86-secret.com/show_oc.php?id=366645

Not bad for ol' skool mobo. :D

This is my first OC ever with my brand new PC

(it is also the first time i have run an AMD)

you think that ok for my first try? I don't want to push the voltage any higher so this is it. i am on water too.

http://img504.imageshack.us/img504/7948/occpugt8.jpg

First take on this 4850e: 250x12 at 1.31v. I might be able to do a lower voltage, but my Gigabyte 790x DS4 has voltage increments of .025, and it slightly overvolts the cpu. 1.275v gives it 1.285v according to CPUZ, and that is not stable. Setting it to 1.3v in the bios gives it 1.312 according to CPUz, and it seems stable. I have had no BSODs, but I have not run Orthos yet.

yea i have mine set at 1.425Volts and CPU-Z says i am using 1.456Volts.
idk why, but it isn't causing problems

X2 4800+ Brisbane @ 3.0GHz:

http://valid.x86-secret.com/show_oc.php?id=381324

Using Gigabyte GA-M57SLI-S4 mobo, 1.4V, although I have an overvolting Gigabyte board like several others here. During OCCT stress testing the voltage peaks at 1.49V.

X2 3800+ Toledo * 3,20 GHz @ 1,500 V * LCBQE 0718 VPMW * Wakü @ 25°C * ohne HS * 3,2 h DualPrime * Techtrancer * Link

http://www.abload.de/thumb/x2380032021525b44.jpg

AMD X2 3800+ Toledo * 3,00 GHz @ 1,440 V * LCB9E 0719 RPMW * Wakü @ 24°C * ohne HS * 3 h DualPrime * Techtrancer * Link

http://www.abload.de/thumb/30001475v3stundenpriyja.jpg



AMD X2 3800+ Toledo * 2,90 GHz @ 1,520 V * LCBIE 0621 VPMW * Wakü @ 29°C * ohne HS * 3,5 h DualPrime * Techtrancer * Link

http://www.abload.de/thumb/29901550jsc.jpg



AMD X2 3800+ Toledo * 2,97 GHz @ 1,520 V * LCBWE 0617 FPMW * Wakü @ 24°C * mit HS * 3,2 h DualPrime * Techtrancer * Link

http://www.abload.de/thumb/29901550j6j.jpg



AMD X2 4200+ Toledo * 3,15 GHz @ 1,504 V * LCBQE 0723 VPMW * Wakü @ 24°C * ohne HS * 3,1 h DualPrime * Techtrancer * Link

http://www.abload.de/thumb/31501525g8u.bmp



AMD X2 4200+ Toledo * 3,00 GHz @ 1,456 V * LCBQE 0723 VPMW * Wakü @ 34°C * ohne HS * 5,0 h DualPrime * Techtrancer * Link

http://www.abload.de/thumb/3000mhz1475ebayfertimi1.jpg

X2 4200+ * 3.41 Ghz @ 1.472V * G2 CAABG 0805BAA * WaKü @ 42°C * ohne HS * 2,5h DualPrime * Techtrancer Link

http://www.abload.de/thumb/x24200g2caabg0905baa0dp.jpg


X2 4200+ * 2.45 Ghz @ 0,992V * G2 CAABG 0805BAA * WaKü @ 30°C * ohne HS * 2 h DualPrime * Techtrancer Link

http://www.abload.de/thumb/245310vfertiguii.jpg

http://valid.x86-secret.com/show_oc.php?id=383084

Nothing much to say against that. Despite i have the Zalman 9500 CPU Cooler, heat goes up massivly when this thing is chrunching @ 100%, resulting in errors and failures. This is kinda the max limitation of the cpu.

X2 6400+ * 3,62 Ghz @ 1,568V * F3 Winsor * CCB8F 0809 BPMW * Watercooling @ 44°C * mit HS * 2,2 h Prime * Techtrancer Link

http://www.abload.de/thumb/36201568vfertig1kb.jpg

new motherboard, new score :)


AMD A64 X2 4000+ @3517Mhz 1.68v, 335x10.5, Cool It Freezone cooler

Cooldbug @-5° :( with Single stage

http://valid.x86-secret.com/show_oc.php?id=400983

Athlon64 X2 6000+ @ 4121MHz 1.72v Vapochill @ -10'c WR Link

Secret stepping :)

here is my overclock from my athlon 64 x2 5600+
vcore = 1.475
settings= 12X 271 = 3252 mhz
idle 30 degrees stressed 40 degrees (23 degrees amb and on water)

http://img404.imageshack.us/my.php?i...aamloospw0.jpg

i also tested is stable whit orthos for more than half an hour...
still thinking if i am gonna puch the vcore up to 1.5 and get another few mhz out of it... (has to be pretty stable and it can't die on me for another few months)

Here is my most recent overclock

CPU: AMD Athlon 64 x2 5400+ B.E.
vcore: 1.385 in BIOS / 1.28 in CPU-Z
multi: 15
Bus Speed: 215
15x215=3225 mhz

Temps: 27C idle and 38C load (on water)
http://valid.x86-secret.com/show_oc.php?id=436500
Tested with f@h for 24 hours

AMD Athlon 64 X 2 4450e @2.76 Ghz stock HSF
Vcore@1.232
11.5 multi
Idle temps 32*C Load ~48-50*C

B2 stepping....

Running on a Biostar TA780G M2+
2GB OCZ DDR2-800 @ 460Mhz
5-5-5-15

Minor OC (all stock voltages)

http://valid.x86-secret.com/show_oc.php?id=436786

X2 6000+ WInsor F3 | 3600 Mhz @ 1,456V primestable!

http://www.abload.de/thumb/3600fertig02h.jpg

Been fiddling around with my new mobo and here's what I've got from my 5000+BE. Completely stable with Vista64 and runing prime64 bit also. Managed to get a bump of 100MHz from changing from m3a32-mvp. Idle temp 31ºC, load 58ºC.
Air cooling Thermalright SP-128SE

http://valid.x86-secret.com/show_oc.php?id=445030

http://img219.imageshack.us/img219/4774/ockc3.png

X2 6000+ Brisbane @ 1,45v

http://valid.x86-secret.com/show_oc.php?id=439804

my 5000+ BE @ 3.3ghz.
not prime stable, did load programs no problem however. that's the most it went through. fresh install of vista SP1
neeeever booted @ 3.3 again :shrug:
time is off...i farked on setting it. had to reset cmos before because my 'wonderful' dual bios didn't recover.
will try again this weekend

http://img196.imagevenue.com/loc59/t...z_122_59lo.jpg


hopefully i can post this here too? even though it's not X2,
didn't see a thread for single core
i got bored last night and went after my s754

Athlon64 s754 2800+ 1.8Ghz stock
munching down on 1.70v w/ stock HSF
it booted @ 1.650v and passed a superpi (only bench it could run) but locked after 10 min.
board doesn't let me do 1.675v :S

Win2K for the O/S


http://img245.imagevenue.com/loc22/t...z_122_22lo.jpg

X2 4050e @ 1.47V

http://valid.canardpc.com/show_oc.php?id=456180

wow.. are those volts even safe? i didn't wanna try for 1.43 and above cos i was afraid of burning up my 3600 brisbane.. maybe that's why i'm limited at 2.8ghz lol

Athlon X2 4850e DH-G2, 3 GHz @ 1.35V, Prime stable. :yepp:

http://valid.canardpc.com/show_oc.php?id=453133

1.4V

Athlon 64 x2 5600+ @ 3.50 GHz, 1.456V

http://img262.imageshack.us/img262/2303/oc1vq9.th.jpg

http://valid.canardpc.com/show_oc.php?id=465209