thanks for the help vern i did it myself works as a charm
unlocked volts to 1,2 and fan min 30% rest idles the same and loads the same :D
http://img819.imageshack.us/img819/2847/unlocked.jpg
Uploaded with ImageShack.us
Printable View
thanks for the help vern i did it myself works as a charm
unlocked volts to 1,2 and fan min 30% rest idles the same and loads the same :D
http://img819.imageshack.us/img819/2847/unlocked.jpg
Uploaded with ImageShack.us
Congratulations:)Quote:
Originally Posted by andressergio
thanks vern u encouraged me to do it :DQuote:
Originally Posted by vern
new drivers are awesome for the GTX460 !
You are welcome:DQuote:
Originally Posted by andressergio
Hello Vern :)
Could you unlock the max voltage and set the min fan speed to 30% for my Gigabyte GTX460 1GB OC please?
Thank you very much!!
sup mateQuote:
Originally Posted by firestarter.pt
save it on .ROM with nvflash, not on bin format thats what you attached
put nvflash files on a bootable flash drive and boot
then type nvflash -b original.rom so you will be saving the exact rom
then post it again i can mod it for you if you want now i learnt and tried all ma self thanks to vern and the guide for nvidia fermi editor
Cheers :up:
Sergio
Hey Sergio, thanks for your help. I've done what you said, here is the file :)
(PS: i added you to msn messenger just now)
glad to help mateQuote:
Originally Posted by firestarter.pt
zip file is corrupted...re upload plz
Opss again
same mate :confused:Quote:
Originally Posted by firestarter.pt
add me again on msn i will help
cheers
Your BIOS : http://www.sendspace.com/file/ytrca2Quote:
Originally Posted by firestarter.pt
Good luck
Thank:DQuote:
Originally Posted by andressergio
Thank you Andre and Vern!
Too bad I can't beat 850 mhz OCCT stable because the card gets too hot :(
How many voltage?Quote:
Originally Posted by firestarter.pt
1.15v and 1.2v :P
850Core , around 1 - 1.050V is ok:DQuote:
Originally Posted by firestarter.pt
High voltage with very hot:(
glad mate you liked the bios
vern dont get angy on me i learnt how to do the stuff lol
cheers for all
Sergio
hahaQuote:
Originally Posted by andressergio
Never mind:D
All the best
Vern
same to ya mateQuote:
Originally Posted by vern
did you try the new drivers ? i get awesome boost on fps
I will test it late , do you know how to set lod on this driver?:DQuote:
Originally Posted by andressergio
i used inspector modded but really i dont know what the hell does i have all set at max for ex BC2 or MOH i dont really see any changes on level of detail...Quote:
Originally Posted by vern
here is the latest thread i saw you there
http://www.xtremesystems.org/forums/...ght=lod+nvidia
cheers !
Sergio
Yes , the latest nvidia inspector can not set lod in new driver . :(Quote:
Originally Posted by andressergio
crap :(Quote:
Originally Posted by vern
but what is for ? as i say i cannot see any dif using negative lod
SetLOD cannot use , cannot see any changes on level of detail:(Quote:
Originally Posted by andressergio
SetLOD and setting the clocks before the run gave me higher frames .
Can someone do mine?
30% fanspeed and 1.2v limit?
http://www.mediafire.com/?d8v08dnjamza1nb
anyone?Seems pretty dead here?
your modded bios :)Quote:
Originally Posted by dafour
http://dl.dropbox.com/u/58641833/Mat...d/gf104mod.rar
Thank you!
Did some testing and confirm my toughts.
875 core at 1.075
900 core at 1.16xx and refuses to be stable even when pushed 1.2v
Bad card,bad card...
Back to original bios again as i have no gains..only temps :p
*edit,
back on original bios i can't reach the clocks i could before,constant hard locks at 875 1.075 :(
How is this possible?