Big T any chance of, when you get a chance of course, checking out the DS3 bios ?
im sure you been asked but i searched this thread and it said no matches so thats why im asking.
increased vmch ? vdimm ? hidden features ?
Printable View
Big T any chance of, when you get a chance of course, checking out the DS3 bios ?
im sure you been asked but i searched this thread and it said no matches so thats why im asking.
increased vmch ? vdimm ? hidden features ?
Gday Pple
First post here ,great Forums BTW
I am wondering if anyone can help me out ,I have searched the internet high and low ,for a ASUS A8R32 MVP Deluxe Modded Bios.
The reason I am after a modded bios, is this board is seriously let down by LOW Vcore Options in the bios ,max 1.520 Vcore for me there are no more options to go Higher.
I have a water cooling setup and want some more Vcore to up my CPU,if any one can help it would be greatly appreciated .
Thanks guys
I'll try every F button :) . Is there a modded bios for this motherboard?Quote:
Originally Posted by SirMute
Hey Toni,
Is there a good guide (one you personaly prefer -being a BIOS mod legend-) for modding AMI BIOS? I'm very new in this, but I'm willing to learn averything about it.
Hope you can help me with this.
Hey tony,
Any chace of a modded bios for MSI K8NGM2-NBP. all i need is a higher fsb selection (only allows 250, but 300 would be perfect, 270 required). also, if at all possible, more voltage options (vdimm, vcore, etc) but not necessary.
thanks.
Howzabout the Asus Crosshair. The BIOS provided is Cr#*. Has anyone fooled around with this board??
TY
Creeper
Any chance you could look at the Tyan Thunder K8WE BIOS.? There are no overclocking options whatsoever and the latest BIOS has just given support to the 7950GX2's but only one, add a second and there are IRQ errors which they claim are a fault at their end but haven't bothered to rectify anything yet.
Thanks very much in advance, I wish I could do what you do.
Here's a linky to the BIOS...
http://www.tyan.com/support/html/b_s2895.html
As of today is this the most current? I searched through here quite a bit, so sorry if I missed something.Quote:
Originally Posted by Tony
The BIOS i'm using right now on my DFI UT NF4 Ultra-D is from 4/14/05. I have no problems with it, other than the fans cranking to high when coming back from Stand By. I have to restart the computer for the fans to throttle back down. Was this ever fixed?
Thanks
Did some more digging and found my answer on page 46 of the Bugs and Fixes thread.
Gonna try out this BIOS.
Edit: Works like a charm. Had to spend a couple hours fighting with the settings to get back into Windows though.
quote / thread in question?Quote:
Originally Posted by Soulburner
http://www.xtremesystems.org/forums/...postcount=1133Quote:
Originally Posted by el rolio
http://www.xtremesystems.org/forums/...postcount=1135
I have the "Old School" Ultra-D. I just needed to fix the annoying resume bug because I hate having to turn my system off, and back on every day.
Hey Tony, or anybody else, this motherboard wont offer a 150 mem divider, any chance somebody can mod the latest bios (1303) to add 150 mem divider?? :stick:
i finally found this amazing thread!
I am to guess the top dogs around here are Mr tictac, and Mr bigtoe.
i found a post regarding the Shuttle SN41G2 with the FN41 version 1 board.
And there was i bios for it that had been modified. Yay! but the link was broken! :upset:
so could someone modify the bios again?
i really want to use my Athlon XP-M 2500+ in this little shuttle so have a multiplier option is a must! I would also like Vcore options. memory voltage isn't a problem as i wont need to touch that.
The link for the bios is here
http://global.shuttle.com/Download/D...sp?Item=SN41G2
Thank you.
The only thing amazing about this thread is that 99% of the posts go unanswered....
I guess thats 99.9% cuz i really dont think he has time with this.
Thread should die out or be removed.
TBH tictac and bigtoe do these modifications in there own time. so its only fair to wait, they dont have to do it.
If anyone out there has the modified bios for a Shuttle SN41G2 V1.
Thank you.
They only seem to be care about high-end mobos...
I second lestats request for the DS3..
These bios' they come out with are just garbage for me..
The Rebels Haven is doing BIOS mods on medium priced boards like Biostar, DFI, and some others.Quote:
Originally Posted by ReelMonza
Quote:
Originally Posted by [cTx]Philosophy
the DS3 cant be modded.
the S3 and S2 can though. or atleast can be accessed and changed but i thought someone said you cant actually save the new bios, only look around at it.
there really isnt much else that needs to be in the DS3 bios except more chipset voltage.
they upped the vdimm to 2.5 which is more than enough for anything but FatBodies.
Hahaha that it trueQuote:
The only thing amazing about this thread is that 99% of the posts go unanswered....
Well can any one, Big Toe , or would some one else be willing to do me a modded bios for a Asus A8R32 MVP deluxe ,with Higher Vcore and if possable add the DFI Uli 1.20 raid rom into it as well please.
### Edit ,Yeah sorry pple I was just trying to promt a reply in a joking way ,I was in no way trying to dissrespect anyone,I have edited my post to reflect what I wanted to get accross
You can add more Vcore options on the software side ( BIOS )...but the hardware needs to be on par aswell.Quote:
Originally Posted by REVHEAD
You need to perform some Vmods ( such as Vcore mod ) to get higher voltages.
By the way, please don't play with BigToe's name, as this sounds like disrespect.
And Tony ( BigToe ) shouldn't be treated with disrespect as his a good guy, with lots of history in the HW Community, and he's been always helpful to every1.
friendly [ as always ]
BenchZowner
I fully agree. Poeple need to realize that BigToe's got a job in his real life and their problems sure don't have highest priority for him. It's a really nice move that he even offered his help at all. ;)Quote:
Originally Posted by BenchZowner
I have just adjusted my previous post Sorry all
Epox EP-8NPA SLi if you have the time :)
anything to make it more stable for overclocking.
then i can brag about how i was lucky enough to get a BigToe modded bios :banana: :woot:
...btw how you do it? :confused:
As I doubt Bigtoe will find the time, I did what's possible with this latest BIOS (based on 83js6811):Quote:
Originally Posted by (1)ne
http://www.fh-augsburg.de/~madocer/BIOS/(1)NE.BIN
And please don't ask what's new. I don't have the time for that. Have a thorough look at it and then you should spot the differences. There was not really much to do. BTW, select the options from the drop down menu and not with "+" and "-", as some options don't have a name, thus they aren't displayed normally. ;) You'll figure it out, I hope.
Should be no problem using it, but as always: USE AT YOUR OWN RISK! No GUARANTEE FROM MY SIDE!
gues that requesting a modded ASUS bios (for A8N-SLI) is still hopeless? or is it possible yet?
I already got some that I did some time ago. This should be the latest:
http://people.freenet.de/celemine1Gi.../A8NSB014M.BIN
Quote:
Originally Posted by RebelsHaven
You are right. The answer is: Too much hassle. The functions work and that's what counts. When editing in some names, it would've changed adresses, the checksum would've needed to be corrected and so on. So, I just left it at that. Asus didn't give the functions names and that stayed that way with my BIOS version. If you want to change that, feel free to do so. But don't be surprised if you get a corrupted BIOS then. ;)
I know, but I still won't do it. Compare to the original, then you'll know. Got no time, sorry. Exam in a few hours. :eek:Quote:
Originally Posted by RebelsHaven
:banana: awsome, thnx a lot!!! :clap: going to try this, maybe as soon as this weekend or else the weekend after that. can you name what the change's are? (will come across eventualy but like to know before I start)
hi, im friends with (1)ne:D , he told me about you guys, i was wondering if someone could make me a custom bios with a little more overclocking options, again my mobo is a MSI P4MAM2-V, i would really appreciate it,
Thanx again:)
Tony can you do something about the DFI Infinity UltraII M2.?
How do I convert a ".bak" file generated by "winphlash" to a .rom or .bin?
Trying to unlock options in the linked bios, but getting nowhere :(
Also, any way to update microcode so it supports 800fsb and up meroms? :D
http://www.wcroller.com/los/downloads/bios3.bak
EDIT
Anything that can be done for this one? Selectable memory ratios and cas/trcd/trp/tras etc would be very nice.. SuperMicro X7DAL-E motherboard which quite a few of the XS DC team are using. Also using the X7DAE.
X7DAL-E: http://www.supermicro.com/support/bi...p/7DAL1267.zip
X7DAE: http://www.supermicro.com/support/bi...p/7DAE1267.zip
Had a quick look at it and can't help, unfortunately. None of the tools in my posession work. Neither MMtool 3.12, nor AMIbcp3.13. :(
Hope someone else will be able to help.
I can open the X7DAL-E and X7DAE bioses with Pheonix Bios Editor, but beyond poking around to see what the bioses have in them i'm far too inexperienced to play with values that way ;)
Hmm, didn't even try with a Phoenix Editor. Perhaps I'll find the time to do so later. Had assumed that these were AMI BIOSes. :)
Did some digging.
Here's a link to the 1.15 bios for the m5750. I'll poke it and see what I can get.. doubt much ;)
Also here is the 1.20 bios for the m5790 which apparently must just be a 5750 because its in the same location as the 5550/5750 bios.
5550/5750 1.15: ftp://aliendl.alienware.com/Mobile/m...BIOS_1.15W.zip
5790: 1.20:
ftp://aliendl.alienware.com/Mobile/m..._Bios1.20N.zip
FTP link: ftp://aliendl.alienware.com/Mobile/m5750/BIOS/
edit - bah, the bios files are hidden in the iso :rolleyes:
Hey, sorry to bring out an old post, but any new info on this?Quote:
Originally Posted by Tony
If it's of any interest, I seem to have a newer revision p5b vanilla board.
It allows vmch up to 1.70v (while I haven't verified that they all work, when I set higher than 1.25v, like 1.40 or 1.55, I do get more stability in higher fsb).
But the thing about vdimm. Traditionally, I've only seen p5b vanillas support up to 2.10v.
However, in my new revision, I have options for 2.00, 2.05, 2.10, 2.15, 2.25, 2.30, 2.35, 2.40, 2.45, if I recall correctly (didn't include those under 2.0).
That said, when I take a dmm and actually measure vdimm, I get some interesting results.
2.00: 2.08
2.05, 2.10, 2.15: 2.12
2.25, 2.30, 2.35, 2.40: 2.37
2.45: 2.55
So it does look like the vreg is definitely not maxed out, at least in my board. However, I'd really like to be able to have vdimm definitions more in the 2.2's. Currently, of the settings, it's really only setting 2.08, 2.12, 2.37, and 2.55 as the actual outcomes. If 2.20, 2.25, 2.30 actual could be realized, it'd be phenomenal.
FWIW, I've had all these vdimm settings with both the stock bios (second most recent iteration) as well as most recent bios. I didn't do vdimm measurements except with current one.
I understand if you're really busy. If you could point me in the right direction, I could try to see what I can do with my very limited knowledge. I've tried modbin6 but it seems to not want to open the file. It did say to be in dos/9x, and I tried in an nt environment so that could very well be why.
edit: trying amibcp right now
edit2: hmm gen8 only.
Also, I've found a resistor to pencil shade that'll cause leg6 of vreg and ground to decrease in resistance. However, the outcome was somehow opposite of expected. Instead of realizing a vdimm gain, 1.8v became 1.45v, and needless to say, the chips didn't post. If I could perhaps be able to drop 2.37v to 2.25v (0.12v drop) and hope that my chips post at 1.8v (which will become 1.68v) then it might be good enough for me. Worst comes to worst, maybe I'll change spd to really low clocks and weak timings to get them to post.
Tony,
What about Asrock 4CoreDual-VSTA?
Thanks,
Oscar
Greetin' Dudes
I 've req .. enybody have modded Bios (with setting Vcore) for 7NF-RZ
I've F4 ver. but unfortunatelly without Vcore Setting..
I wrote to gigabyte service and i got none answer..and sign.
i know that older mobo, but maybe someone tried and have moding this bios
Plzz help:)) & B. ReGArdz..
Can someone tell me how to get modbin6 to work with the bios for a Gigabyte 965p-ds3 rev 3.3? I listed a link to the bios below and when I try to open it with modbin6, it states its not compressed. The Bios is an Award Biod v6.0PG.
http://tw.giga-byte.com/Support/Moth...ProductID=2456
I've tried various versions of modbin6 with no success. The latest I could version of modbin6 find was 2.01.01.
Is it possible for someone to make a Gigabyte 965P DS3P bios from a Gigabyte 965P DS4, as the mobo is exactly the same, I've tried to flash my DS3P with the latest F8 bios from the DS4, but it gives me a check sum error, the latest bios for the DS3P is only a F4 bios.
You can always use forceflash at your own risk!Just use a dos flashing utility and type in "/?" to show the options. For the award dos tool, the option is "/f" to force flash, regardless of the checksum. ;)
And ASUS P5PE-VM ? There aren't any overclock settings, not even FSB :( Anyone?
No bios settings, lets do some BSEL modding :woot:
Maybe Tony forgot about us :stick:
Can you do something about DFI RDX200 CF-DR?
Hi,
Was looking for a BIOS for P5B -Plus other than stock.
Most of its contents are fine Vcore, Vdimm etc etc, but needs cpu/fsb setting (1:1 / 2:1/ 1:2? ... )
It might have already been done, maybe you could steer me in that direction.
Thanks,
WII
Tony, I'm surprised I haven't seen a commando BIOS from you yet. Is the board that good? :D
I would love a modded bios for a Tyan S2692. Can clock in Systool but need memory dividers as memory is a limiting factor (FB-Dimms) :(
Please help.
That seems to be happening on a few mobos these days.Quote:
Originally Posted by Dualist
You & me both.
Hey all,
Any chance of a modded bios for the Asus P5VDC-X board?
I cannot increase the vcore voltage as there is no option to and several other options seem to be disabled.
I have tried modding one myself with no look, buti'm hoping someone may know and be able to mod it for me. Pm me here and ill send you an email with teh bios if needed or just to let me know :)
Bios url: http://dlsvr02.asus.com/pub/ASUS/mb/...X/VDCX0701.zip
Thanks,
Shr3k
Hello Tony,
I have a question. A friend of mine has this mobo,
http://global.msi.com.tw/index.php?f...2_no=&cat3_no=
based on the Intel 845 Chipset. Could you modifie a bios that would support a 800mhz Bus? He's running a crappy 1.8Ghz northwood and I found a 3.2ghz northwood in a dead mobo, but I'm not sure it will work on the bios/chipset he has now... Could you help us please? He's not like spending much money on computer items and he's also not very rich...
-devastatioN.
MOBO has 1.8v limitation on the vdimms. I would love to be able to modify the vdimm voltage to at least 2.1 so I can use some of the better memory on my rig.
Could you please help?????
Hey Tony, Been trying to join this forum for the last 6 months but never get my verifications emails to my email!
Anyway...Can you make a bios for the FDI Lanparty SLI-M2R/G? I've used your bios on my old SLI-DR and it was awesome but need it now for my current setup!
Here is a link to the bios:
http://us.dfi.com.tw/Support/Downloa...FLAG=A&SITE=US
Thanks in advance
jesus what could you possibly want for the M2R/GQuote:
Originally Posted by shifty22123
that freaking bios is insane and has more options for things than you can know what to do with.
what could you possibly want from that bios thats not already there ??
maybe remove some settings he doesn't understand :p
iirc when you pop a clawhammer in you can go as high as 1.55v (as that is its max VID value) and then add another 0.2v with the overvolt option resulting in 1.75vcore. So the hardware itself is up to par I guess.Quote:
Originally Posted by BenchZowner
Right now i can't go higher than 1.52v :( and I think this chip could use some more juice to reach its max potential. 3500mhz 1.6v for 24/7 use would be nice :yepp:
Tony... when you have the time, could you pleeeeeeeeeeeeease look into this? I would really really really appriciate that :) I'll be running WCG 24/7 if that motivates you any!! :p:
cheers
Hello Tony, my motherboard bios is asus a8n5x, my interest is for make modded bios. With stability rock....
Thanks you very much.
My latest bios:
http://www.mediafire.com/?1nz3lnmzunc
Info for my motherboard:
http://es.asus.com/products.aspx?l1=...96&modelmenu=2
ASUS P4G800-V
All overclocking options are disabled, maybe u can help me :)
http://dlsvr01.asus.com/pub/ASUS/mb/...v/1011-001.zip
Can you find any memory timings/ram voltage > 2.1V adjustments in this bios:
Asus M2A-VM HDMI
Bios 1101.zip
There is also an issue with the cnq malfunctioning when playing any kind of video.
Thanks and God bless!
Hello,
is there any possibility to give more than 2,85V to my good old bh5?
Board: P4C800 Deluxe
BIOS: http://dlsvr01.asus.com/pub/ASUS/mb/...0/1021-005.zip
Or is the only way the VDimm Mod?
THX
Tony's last response in this thread is exactly one year ago! :) Why do some people refuse to realize that.
IMHO, it was time to close this thread long ago. But that's just my 2 cent. If he modded a single bios on request in the last year, then I stand corrected, but I highly doubt it.
does somebody has a modded bios for abit ip35pro ?
theres one on my site i think www.bios-mods.com , see my signatureQuote:
Originally Posted by Xtasy