http://i25.photobucket.com/albums/c6...2/IMG_0667.gif
http://i25.photobucket.com/albums/c6...2/IMG_0660.gif
http://i25.photobucket.com/albums/c6...2/IMG_0752.jpg
Printable View
Vandi423, any reason why you use a fan only on one cpu?
Silence....Quote:
Originally Posted by lowfat
http://img64.imageshack.us/img64/9176/afteridle4me.gif
I am working on a thread where I explain everything. As you can see the other CPU doesn't need a fan. Adding a second fan would only disrupt my planned air flow.
anyways that looks sick. I'm not much of a fan of lights, etc but the UV looks great.
That is a great idea with that plexi shroud. And great temps for a 6800, that is semi-passive. How are load temps? With my old 6800 using a VF700Cu I idled in the low 50s.
Time for max go do some shopping at vandis house.. one dual opteron rig in V2000 coming right up ;)
that case really looks good vandi. how did you make the heatsink glow green?
lowfat - the UV in the pics looks much brighter than it does in person. I didn't want it to be too bright because I certainly would not like that. It’s a nice warm glow. :D GPU gets up to 65C on a full load in a warm room. Temps could be even better with a thinner base and heatsink made out of copper. But this was an old A64 HSF.
MaxxxRacer - haha your chipset mod made want to do this. Thanks for posting what you did! :toast: It finally solved my heat and noise problems. That stock cooler was killing me!!!!!
skane - UV paint applied only to the tips of the fins. It looks better in person because it has a pattern to it. I just couldn't get a good picture of it. I applied the paint with a semi-dry Q-tip so makes it look weird like it’s not painted.
one of the best air cooled cases i´seen so bfar,discrete and sober altough very eficient.Nice job there.
Dual opteron 254 system for dad.
Waiting for the dam power supply, but here you go
http://foofy.swiftco.net/zane/dual254work.jpg
What does your dad do???!
....besides making loads of $$$....Quote:
Originally Posted by n00b 0f l337
:slobber: :slobber: :slobber:
damn, my father can't even figure how the remote control for the dvd works :stick:
Z, all that cpu power with that wimpy little gfx card. pretty funny stuff.
Just a gues but its not gonna be a graphics workstation.
lol, yep. we're going to put it into our office, where incoming visitors can use it to simply browse the internet and use microsoft word to print out quick documents. we had 4g's to waste, so we just went ahead and built that for the hell of it.
in fact, when we are done soon, we're planning to chuck the system into a raging fire, and submit a video-clip to ebaumsworld and other humor sites alike... :D
/sarcasm
hehe, its actually going to be used as a server, and most likely, it's also going to be doing some crunch work.
Vandi, that case is awesome! It takes skill to pull the UV look off right. Did you paint the edges of the heatsink with UV paint?
I just rewiered my case. Its nothing compared to any of the stuf here but here is before:
http://img52.imageshack.us/img52/1286/img00261sv.jpg
http://img52.imageshack.us/img52/688/img00286mo.jpg
After:
http://img52.imageshack.us/img52/7236/img00317lo.jpg
http://img52.imageshack.us/img52/6637/img00321iy.jpg
Sorry for the bad pictures I suck at photography.
My temps went waaaay down, from 37 idle down to 31, dipping down to 28 sometimes. Not sure if its too acurate though because my PWMIC went from 43 to 33.
I also noticed that when I put it on top of my desk the temps went up 2 C, is that normal?
Oh and I dont have a fan on my VX because I'm still running it stock volts.
CABLE MANAGEMENT. They need to teach a class or something. It's not that hard. It might be a nice and new system but with poor cable management, it just looks like crap. My opinion.
Quote:
Originally Posted by z-design
rofl read that and was about to reply, you're a tricky one ;)
Heres mine.....needs cable mgmt,But its a work in progress
http://216.77.188.54/coDataImages/p/...icture0033.JPG
New Zalman..........
http://216.77.188.54/coDataImages/p/...6191000909.jpg
Was able to get some wires put away but not much........Custom cables are next
Quote:
Originally Posted by SlackerXL
LoL. Sounds like my father. Still calls me up because he has issues with the DVD player or VCR yet spends his days at the office on a quad processor power mac with dual displays doing graphic design with Creative Suite 2... and is very good at it.
:baffled:
cant get pics to wor
k ill get them later
updated....still have lots to do:(
http://216.77.188.54/coDataImages/p/...6901000947.jpg
http://216.77.188.54/coDataImages/p/...6921000941.jpg
Traded my Big Typhoon for a mint super lanboy :cool:
http://www.xtremesystems.org/forums/...1&d=1139700112
http://www.xtremesystems.org/forums/...1&d=1139700112
http://www.xtremesystems.org/forums/...1&d=1139700112
http://www.xtremesystems.org/forums/...1&d=1139700112
http://www.xtremesystems.org/forums/...1&d=1139700112
http://www.xtremesystems.org/forums/...1&d=1139700302
http://www.xtremesystems.org/forums/...1&d=1139700302
http://www.xtremesystems.org/forums/...1&d=1139700302
http://www.xtremesystems.org/forums/...1&d=1139700302
just using for attaching pics as imageshack is down..
:cool:
Heres mine. i love my baby
http://img300.imageshack.us/img300/3572/pc38cx.jpg
noice trade. superlanboy for typhoon, id do it any day,, but i already have a lanboy :D
this is my current rig! next upgrade would be a OCZ Powerstream 520 Watt and a Sapphire X1800XT :banana:
http://i30.photobucket.com/albums/c3...Innovation.jpg
@De$troyeR
a very clean interior
and a very interesting radiator
could you post more info about it?
yer, like temps? that is a beaslty rad!!!Quote:
Originally Posted by SlackerXL
what one is it?
its a watercool mora 2 pro + fan-adapter
http://212.227.231.249/watercool/cms...pics/20310.jpg
http://212.227.231.249/watercool/cms...0310%2Dalt.jpg
http://212.227.231.249/watercool/cms...pics/20570.jpg
9 120mm fans :)
temps..hmm...about 33°C @ 3300mhz - 1,6v @ 18°C roomtemp @ prime95
that's one monstrous rad.....Quote:
Originally Posted by -De$troyeR-
9x120mm fans :eek:
(and i thought the 4x120fans of the Stacker RC830 side panel as an overkill.......)
could you give us a clue about its price?
mora 2 core ~ 90€
mora 2 pro ~ 130€
fan-adapter ~ 35€
but this radi is much bigger :D it's a german manufacturer
15 120mm fans :banana:
aqua-computer airplex evo1800 ~ 160€
http://people.freenet.de/destro/Bild...load/31041.jpg
Have you tried what the temps are with the MO-RA2 pro in passive? Ive been going to buy this rad for ages already. This one for my cpu and the current 3x120mm rad for my GPU and CHIPSET :)
32°C passive temp @ 3ghz @ 1,4v @ prime :)
room temp about 24°C ;)
What about sound levels?Quote:
Originally Posted by -De$troyeR-
silent...:D
Could you get back to me on the PM?Quote:
Originally Posted by -De$troyeR-
I propably have to get myself a MO-RA2 pro from the next paycheck
Though the core is 114E and pro 144,90E here in finland.
@destroyer
nice rig ;)
@scream
that's very beautiful colors. The white and red pcb colors are looking very tasteful :D like a cherry cake :D
hehehe... im waiting to get a sapphire gto2 or a 1800xt depends on the size of my pocket... :D really like this mobo... u can really do up a great theme.. :banana:Quote:
Originally Posted by Five-Seven
:slobber: sapphire motherboardsQuote:
Originally Posted by scream
Is that sapphire motherboard really a good overclocker? The crossfire version would be sweet. But it doesnt look like a cherry cake :(Quote:
Originally Posted by scream
Here's mine rig. Lot of work has been done. You can imagine how it looked with all that cables in the back in front. It was pretty dusty inside:) . O will tide the backside today becouse i run out of duck tape. Comments?
http://img86.imageshack.us/img86/2407/dscn39210bh.jpg
http://img86.imageshack.us/img86/9158/dscn39265ot.jpg
http://img86.imageshack.us/img86/4504/dscn39281ii.jpg
http://img86.imageshack.us/img86/7845/dscn39388mj.jpg
http://img86.imageshack.us/img86/6370/dscn39396mo.jpg
http://img374.imageshack.us/img374/770/dscn39458gn.jpg
http://img374.imageshack.us/img374/2825/dscn39566oa.jpg
http://img374.imageshack.us/img374/926/dscn39575lj.jpg
http://img374.imageshack.us/img374/2761/dscn39583zo.jpg
http://img374.imageshack.us/img374/6388/dscn39600qh.jpg
http://img374.imageshack.us/img374/913/dscn39623vn.jpg
http://img112.imageshack.us/img112/8767/dscn39659kn.jpg
http://img112.imageshack.us/img112/9307/dscn39683qz.jpg
http://img112.imageshack.us/img112/5792/dscn39714wa.jpg
that's horrible LOLQuote:
Originally Posted by MafiaMan
Quote:
Originally Posted by sabrewolf732
I know:)
faruquehabib, what is that cooler on the GPU?
Looks like it is made out of polystyrene in the pics lol.
G
Quote:
Originally Posted by Master_G
is it that obvious? yeah polystyrene is awesome for dissipating heat. haha. nah, just a hunk of a heatsink modded to bolt on to that mx440 128mb.
here is a pic of my little one-
http://img136.imageshack.us/img136/1083/llfoamy7rn.jpg
Sorry, bu had to comment, your case looks like its guts were ripped out :-PQuote:
Originally Posted by CSOFT
Like in Episode 5, when Han slices open the Ton-Ton*, to saves Lukes life hehehehehehe
http://images.people.overclockers.ru/59197.jpg
http://images.people.overclockers.ru/56639.jpg
http://images.people.overclockers.ru/42446.jpg
http://images.people.overclockers.ru/50135.jpg
Old one.
http://images.people.overclockers.ru/56640.jpg
http://images.people.overclockers.ru/47697.jpg
In the nearest future : Enermax Liberty 620W, WC , Lian Li V2000BW (When it'll be available in our village)
nice clean rig, im thinking about getting that case....
ThanksQuote:
Originally Posted by ingentingmendeg
Thus it looked before ;)
http://www.forumdeluxx.de/gallery/da...5Bild_0061.jpg
i would say its just as good as DFI... but not as much support... :p:Quote:
Originally Posted by Sume4
Is that an Enermax Liberty PSU I see there, Staucher? *Points at sig* :)
Yes is it 500W Liberty!Quote:
Originally Posted by Makubex_GB
Quote:
Originally Posted by AeroSquid
looks hot :cool:
Not as impressive as most of the rigs here, but this is what I got :) :
http://img232.imageshack.us/img232/4292/myrig0589ly.jpg
http://img162.imageshack.us/img162/2...demypc29xk.jpg
http://img52.imageshack.us/img52/761...9edited5ef.jpg
Cutting those stamped fan-grills helps bring the case temp. down some, and it cuts down on the noise as well. :D I've done that to my case (TT Tsunami) and it lowered the case temp 2c and also reduced the "whoosh" noise you get from the air going through the mesh.
I've been reading through the forum for a week now, and thought this is a good place to start posting:D
I have a bit of experience modding, instead of taking up space here, heres the link to the last time I explained things on one of my projects.
HERE
Check that out:stick:
FiveNine
I was just checking out the mods and there is some nice work posted up in here. You know all out speed has it's place. All my current sytems run at over 4000mhz my main system runs 4400 everyday just like clock work. But the real thrill was modding a case that fit my needs. It sits on my desk right off to my side where i can appreciate it the most. I believe in using a roomy but very basic case. I am not interested in whether it has good air flow characteristics. I'll take care of all those issues. I just needed a casae big enough to fill my needs. I'll take it from there!!
Enermax CS-181-B nice size. http://img.photobucket.com/albums/v253/WeldZilla/1.jpg Very basic, Motherboard tray ran the whiole length of the case. Yuck!! Not when I got done. Now it is removable But, only cuz I cut it all to pieces!!
http://img.photobucket.com/albums/v253/WeldZilla/5.jpg
Then I lived up to my name.....
http://img.photobucket.com/albums/v253/WeldZilla/20.jpg
Then it was all gooooooood.........
http://img.photobucket.com/albums/v2...lla/desk_1.jpg
Oh yeah I Built the desk and painted it up to match too!!
Now it is time to build the next one...........
WeldZilla
I absolutely love it. Kudos weldzilla
ingentingmendeg, my dream silent RIG :)
But look awesome, so clean....
thanks dude.Quote:
Originally Posted by maratus
XASER III FTW. Nice window on it man, looks awesome. :D
Ok, i'l show you some of the cases that i've owned and modded a bit
going fomr beginning years(noob) to my ATC's
Now i have twin ATC410 but i will post pics when they are finished
http://img57.imageshack.us/img57/959/case7ia.th.jpg
http://img57.imageshack.us/img57/346...00199zy.th.jpg
http://img57.imageshack.us/img57/502...14149nk.th.jpg
http://img57.imageshack.us/img57/894...anli7un.th.jpg
http://img49.imageshack.us/img49/913...00033ue.th.jpg
http://img57.imageshack.us/img57/835...00049on.th.jpg
http://img57.imageshack.us/img57/460...00055ig.th.jpg
Got my new Tt Tai-Chi tower :toast:
http://www.conman.se/PICT0231mellan.JPG
http://www.conman.se/PICT0226mellan.JPG
http://www.conman.se/PICT0229mellan.JPG
http://www.conman.se/PICT0222mellan.JPG
It looks great with my samsung 40" lcd
My internet computer have moved in my old Shark tower.
See both computers @ www.conman.se under "datorn"
Just a naked PC71 :p:
http://img159.imageshack.us/img159/9...pc717hc.th.jpg
That's really nice work man! I love it. :toast:Quote:
Originally Posted by WeldZilla
I need to mod my case bad... spray paint at the very least. Its a sun faded cream full tower case from the pentium 2 era.
Thing is Im totally clueless when it comes to modding.
Some real nice cases in here, makes me jealous :lol:.
If you say so...:slap:Quote:
Originally Posted by CompGeek
any pics of the indside?Quote:
Originally Posted by Bogi
Hi, this is my project "Simple And PowerFull" @ Stacker :toast:
http://cesaroliveira.no.sapo.pt/DSC00939.JPG
Before the Rad Nexxxos 120mm to be connected:
http://cesaroliveira.no.sapo.pt/DSC00941.JPG
http://cesaroliveira.no.sapo.pt/DSC00942.JPG
http://cesaroliveira.no.sapo.pt/DSC00953.JPG
http://cesaroliveira.no.sapo.pt/DSC00952.JPG
In this photo the nexxxos already are connected:
http://cesaroliveira.no.sapo.pt/DSC01025.JPG
Project finished:
http://cesaroliveira.no.sapo.pt/DSC01019.JPG
Bye ;)
_CrAzY_BoY_, I think, my blood-vessels are thicker than your tubes!
Great job Crazy Boy. Nice completions.
Nice crazy, that looks very clean and sleek :toast: :banana:
Crazy, First of all, Welcome to the forums and tbh i never liked the stackers but yours is an exception. That looks excellent. Well done:)
hi, Thank you my friends :toast: , I love this forum, but as I am Portuguese I write little here :rolleyes:
Bye
Do you happen to have a project log available for that cm stacker?Quote:
Originally Posted by _CrAzY_BoY_
It's 1 year old this month. :D
Old pics, but i'm too lazy to clean it up n take new ones atm lol.
http://www.nelp.net/slayer/case/005.jpg
http://www.nelp.net/slayer/case/03.jpg
What it was made for :D.
http://www.nelp.net/slayer/Lan%20Pics/LPANE/005.jpg
http://www.nelp.net/slayer/Lan%20Pics/LPANE/004.jpg
http://www.nelp.net/slayer/Lan%20Pics/LPANE/006.jpg
Almost done.........I think......
http://www.nelp.net/slayer/comp/water/day1.jpg
http://www.nelp.net/slayer/comp/water/day2.jpg
http://www.nelp.net/slayer/comp/water/glow2.jpg
http://www.nelp.net/slayer/comp/water/rig.jpg
Nothing special. This is my previous case, my new Lian Li and some new hardware is fired up, but my camera is on holiday :)
It's not perfect, but (was) good enough for me. Please feel free to comment until my Lian Li pictures arrive :)
http://xtremesystems.org/forums/atta...1&d=1144365676
http://xtremesystems.org/forums/atta...1&d=1144365676
http://xtremesystems.org/forums/atta...1&d=1144365676
http://xtremesystems.org/forums/atta...1&d=1144365676
http://xtremesystems.org/forums/atta...9&d=1144362414
Hardware:
OCZ Powerstream 420W
MSI K8N SLI Platinum
Athlon64 3200+ Winchester (CBBID sucker)
Zalman CNPS 7700AlCu
OCZ 1GB (2x512) DDR400 EL Platinum Rev1
HIS X800XL IceQII turbo
Maxtor 120GB Sata
Yes... --->Here<---Quote:
Originally Posted by Jester FPS
Bye
slick rig, crazy boy.
here are some pictures of my rig.. initially it was very bare and plain looking.. so i decided it was time to change that...
http://i30.photobucket.com/albums/c338/timpal/Inno2.jpg
this was before any modding was done and changes were made..
http://i30.photobucket.com/albums/c3...l/DSC00013.jpg
got a verudium power vortex 430W.. previously i owned a HEC 380W..
http://i30.photobucket.com/albums/c3...sleevedpsu.jpg
got my new power supply sleeved... orange cause i have a theme in mind!
http://i30.photobucket.com/albums/c3.../fatality2.jpg
also got a fatal1ty cooler for my gfx..
http://i30.photobucket.com/albums/c3...l/fatality.jpg
another shot of the cooler.. as u can see i sleeved the connectors too..
http://i30.photobucket.com/albums/c3...l/DSC00012.jpg
the cpu cooler.. also sleeved..
http://i30.photobucket.com/albums/c338/timpal/UVset.jpg
testing out my theme.. :D
http://i30.photobucket.com/albums/c3.../finished1.jpg
put everything back together.. :banana:
http://i30.photobucket.com/albums/c3...lityvgacpu.jpg
an aspect shot of both fatal1ty coolers.. :woot:
http://i30.photobucket.com/albums/c3...l/bros_rig.jpg
and the somewhat finished product... :toast:
Chri$ch ,that´s what i intended to do but it breaks my heart to cut a lian Li so i decided to use it as it gets.
http://img127.imageshack.us/img127/5...9medium1un.jpg
http://img86.imageshack.us/img86/692...1medium4jj.jpg
http://img153.imageshack.us/img153/6...emedium5cp.jpg
http://img153.imageshack.us/img153/6...4medium6hu.jpg
Quote:
Originally Posted by AeroSquid
I like the color choices, nice work.
Crazy Boy that rig gets my vote for nicest CM Stacker I've seen, and probably in my top 10 favorite rigs. Awesome job man. It exemplifies its title, "Simple and Powerful", very sleek and professional yet with flare. Amazing.