Team Group's DDR2 Power: 667mhz 1g dual channel kit CL-3-4-4-8

Printable View

Show 100 post(s) from this thread on one page

07-27-2006, 11:27 AM
NiCKE^

Been playing a little more today:
http://pics.pajper.net/534.jpg
http://pics.pajper.net/500-dual32.jpg
07-27-2006, 11:35 AM
TankGuys

Update guys: The 3-3-3-8 667 Mhz stuff is in stock (yay!) which means I'll be contacting any of you who were involved in the 3-4-4-8 inventory debacle for replacements :)

Also, we have the 1000mhz memory in stock now as well. Good stuff!
07-27-2006, 11:45 AM
party animal

Nicke, what voltage did you use?
07-27-2006, 12:00 PM
NiCKE^

2.28 for the 534 run but I don't remember 500mhz dual pi, but around 2.35v I believe.
07-27-2006, 12:53 PM
Nazu

Should this ram do 400MHz at 3-4-4-8 latencies? And how much voltage should be applied?
07-27-2006, 03:07 PM
wa77ss

TankGuys, any word on a 2 x 512MB 3-3-3-8 kit yet ?

Thanks :)
07-27-2006, 03:20 PM
TankGuys

Quote:

Originally Posted by wa77ss

TankGuys, any word on a 2 x 512MB 3-3-3-8 kit yet ?

Thanks :)

Ah good point, now that you mention it, I still have to get that posted. Too many things to do, too few hours in the day :D

EDIT: Okay, it's up.
07-27-2006, 03:43 PM
wa77ss

Quote:

Originally Posted by TankGuys

Ah good point, now that you mention it, I still have to get that posted. Too many things to do, too few hours in the day :D

EDIT: Okay, it's up.

Shweeet, thanks :)
07-27-2006, 03:56 PM
TankGuys

Quote:

Originally Posted by wa77ss

Shweeet, thanks :)

The only problem is, I don't think Team is sending any here - yet. For now, they are hoping to burn through the last of the 1 gb 3-4-4-8 kits. I'll see what I can do though.
07-27-2006, 07:56 PM
fhpchris

Quote:

Originally Posted by Ramen

So has anyone gotten an early sample / testing for the 2x1GB 3-3-3-8 sticks?

What do you think the chances of those sticks doing 800MHz @ 3-3-3-8 on 2.15v?

even if they do, they prolly will not on the Aopen board.

Alot of people have ram that runs cas 3 on badaxe and it will not run same timings @ aopen.
07-28-2006, 08:40 AM
AnjinSan1966

First post from me :D .Been a lurker for sometime and now i finally making a post.
Ok i have a question about 2X1GBTeamPC2-5300 667MHz 3-3-3-8 and 2X1GBTeamPC2-5300 667MHz 3-4-4-8.I ordered the TeamPC2-5300 667MHz 3-3-3-8 on the 26/7 and i recived them today so far all is good.But when i opened the DHL package it reads TeamPC2-5300 667MHz 3-4-4-8 on the pack and the modules say TXDD1024M667HC3 CL=3-4-4-8.So shall i keep these or return for the others?
Wht say you :D.I payed the same amount as the one i ordered.
Thanx for a great forum and regards from Sweden
07-28-2006, 12:40 PM
Owen1978

Quote:

Originally Posted by AnjinSan1966

First post from me :D .Been a lurker for sometime and now i finally making a post.
Ok i have a question about 2X1GBTeamPC2-5300 667MHz 3-3-3-8 and 2X1GBTeamPC2-5300 667MHz 3-4-4-8.I ordered the TeamPC2-5300 667MHz 3-3-3-8 on the 26/7 and i recived them today so far all is good.But when i opened the DHL package it reads TeamPC2-5300 667MHz 3-4-4-8 on the pack and the modules say TXDD1024M667HC3 CL=3-4-4-8.So shall i keep these or return for the others?
Wht say you :D.I payed the same amount as the one i ordered.
Thanx for a great forum and regards from Sweden

I would RMA them unless u get the difference between the 3448 & 3338 sticks refunded.
07-28-2006, 01:30 PM
AnjinSan1966

Quote:

Originally Posted by Owen1978

I would RMA them unless u get the difference between the 3448 & 3338 sticks refunded.

Ok but the differance was like 300 SKR = 40$ so is it worth to RMA?
Are they much worse performance wise?
Putting together a sys with a E6600, Asus P5W DH and a X1950XT card.
07-28-2006, 01:42 PM
Mikep7779

What makes the D9 Fat-body so good?
07-28-2006, 04:13 PM
Onepagebook

I tell you guys what,
I and TG US office rep has been working very hard for adapting all you guys need, but too bad, the personal who control this is VERY tenacious
he never listen to me;
so if you guys have any concern,

email him

gerry@teamgroup.com.tw
07-29-2006, 04:27 PM
ewitte

Quote:

Originally Posted by TankGuys

Update guys: The 3-3-3-8 667 Mhz stuff is in stock (yay!) which means I'll be contacting any of you who were involved in the 3-4-4-8 inventory debacle for replacements :)

Thanks :)
07-29-2006, 07:40 PM
Stylist

1 Attachment(s)

Any ideas why my 2GB teamgroup PC5300 DDR2 667MHz 3-3-3-8 (TXDD1024M667HC3DC) shows "Team1024B-DDR2-667" as Part Number under CPU-Z?
Attachment 49699

Is this anything to concern?

2nd question:

With an Intel 630 I could easily do DDR2 800 with CL 4-4-4-12 (But not CL 5-5-5-12?) and Hyper Path 3 by using manual settings with the ASUS P5W DH (bios 701 and 801). Every mem ratio works fine.

Now with a retail E6400 Core2 duo the system only booting with every memory relating options set to "Auto" in bios and Hypher Path 3 disabled.
This results in poor timings (CL 5-6-6-18) and I only can select manual DDR2 800 (1:1) if I don't go higher as FSB400. In the other case I only can do "Auto" ratio which results in low frequencies. The setting and enviroment is absolutly the same (only the CPU was changed). I checked by reinstalling the Intel 630 and everything worked fine again?

Is there any idea or experience with an ASUS P5W DH (bios 701/801), the 2GB PC5300 DDR2 667 (TXDD1024M667HC3DC) and retail Intel E6400 (Stepping 6 / Revision B2)?
Does this relate to my first question (see above)?

Thanks in advance

stylist

Thanks in advance

Stylist
07-29-2006, 09:38 PM
[XC] DragonOrta

I have to have Hyper Path disabled using 0602 with my Step 4 E6600. 4-4-4-12-4-Disabled-Auto-Disabled in BIOS works fine up to DDR2-945 with 2.2v and using the 4:5 divider. Using the next highest divider results in booting back to stock, but the next highest diver after that, 2:3, will boot fine. Try booting with the 4:5 divider.

Also, what are you voltages set to?

As for your first question, I have a feeling that it reports that in CPUZ because the stick is 1024mb.
07-29-2006, 11:09 PM
andyisc00l

2 questions on the 2gb teamgroup sets:

1) The teamgroup ddr2-667 3-3-3-8 -- how high are these clocking 4-4-4-x 2.4-2.5v?

2) Team group ddr2-800 4-4-4-10 -- how high are these clocking 4-4-4-x 2.4-2.5v?

I'm debating between these and the g.skill sets...tough decision.
07-30-2006, 01:17 AM
Lestat

Quote:

Originally Posted by Stylist

Any ideas why my 2GB teamgroup PC5300 DDR2 667MHz 3-3-3-8 (TXDD1024M667HC3DC) shows "Team1024B-DDR2-667" as Part Number under CPU-Z?
Attachment 49699

Is this anything to concern?

2nd question:

With an Intel 630 I could easily do DDR2 800 with CL 4-4-4-12 (But not CL 5-5-5-12?) and Hyper Path 3 by using manual settings with the ASUS P5W DH (bios 701 and 801). Every mem ratio works fine.

Now with a retail E6400 Core2 duo the system only booting with every memory relating options set to "Auto" in bios and Hypher Path 3 disabled.
This results in poor timings (CL 5-6-6-18) and I only can select manual DDR2 800 (1:1) if I don't go higher as FSB400. In the other case I only can do "Auto" ratio which results in low frequencies. The setting and enviroment is absolutly the same (only the CPU was changed). I checked by reinstalling the Intel 630 and everything worked fine again?

Is there any idea or experience with an ASUS P5W DH (bios 701/801), the 2GB PC5300 DDR2 667 (TXDD1024M667HC3DC) and retail Intel E6400 (Stepping 6 / Revision B2)?
Does this relate to my first question (see above)?

Thanks in advance

stylist

Thanks in advance

Stylist

you have one of the bad P5W DH units.

return it or rma it or whatever but there isnt a fix for that.

mine did that too among other things. and i even have just simple black label oem samsung 667.
if i tried to manually set 1 timing it wouldnt boot.
this was thru several different bios's.

call asus for an rma or newegg or who ever you got it from.
(do you also have no video on post issues ?)
07-30-2006, 03:11 AM
Stylist

Quote:

Originally Posted by Lestat

you have one of the bad P5W DH units.

return it or rma it or whatever but there isnt a fix for that.

mine did that too among other things. and i even have just simple black label oem samsung 667.
if i tried to manually set 1 timing it wouldnt boot.
this was thru several different bios's.

call asus for an rma or newegg or who ever you got it from.
(do you also have no video on post issues ?)

I wonder why the same RAM works fine with my Intel 630? When I switch the CPU back to the 630 everything works fine.
The phenomena only appears using the new 6400 Allendale!?

And i used GEiL DDR2 memory on the same board before without any problems, too.
No other problems (no screen on boot) or so until now.

So any further ideas?

Is there anyone who use the combination ASUS P5W DH - teamgroup DDR2 667 and retail Allendale/Conroe (Stepping 6/Revision B2)?

Thanks in advance,

Stylist2002
07-30-2006, 04:58 AM
AnjinSan1966

Quote:

Originally Posted by Stylist

I wonder why the same RAM works fine with my Intel 630? When I switch the CPU back to the 630 everything works fine.
The phenomena only appears using the new 6400 Allendale!?

And i used GEiL DDR2 memory on the same board before without any problems, too.
No other problems (no screen on boot) or so until now.

So any further ideas?

Is there anyone who use the combination ASUS P5W DH - teamgroup DDR2 667 and retail Allendale/Conroe (Stepping 6/Revision B2)?

Thanks in advance,

Stylist2002

I will run a ASUS P5W DH - teamgroup DDR2 667 and retail Allendale/Conroe but here in sweden we cant get the cpus until 12 aug :mad:
I will comeback with info then if its of any use :)
07-30-2006, 07:43 PM
Onepagebook

Quote:

Originally Posted by Pjoeloe

did you read my private message Onepagebook ? :rolleyes:

I did not get that;)
07-30-2006, 11:25 PM
mrlobber

Quote:

Originally Posted by Nazu

Should this ram do 400MHz at 3-4-4-8 latencies? And how much voltage should be applied?

Easy. My friend has one kit of 2x1Gb DDR2 667 3-4-4-8 original OPB tested stuff (at the beginning of this thread), I bought him from OPB, he uses it on P5WD-2 with Pentium 940, and has come up to DDR2-796 3-3-3-8 stable @ 2.3Vdimm, and reaches DDR1000 4-4-4-8 easily.
07-31-2006, 02:47 AM
Stylist

Hi,

can anyone of you confirm that the 2GB Teamgroup DDR2 667 will run in combination with the ASUS P5W DH without any problem?
I can't select the timings manually if I use high fsb. Everything above FSB 280 will crash if I don't use the "Auto" option (use SPD timings).
It is ridicules. I know that the RAM do at least CL 4-4-4-12 with DDR800 but I can't use it. Only the SPD ("Auto") settings work with fsb400 and 1:1 ratio.

So in my opinion there are serious problem with the ASUS P5W DH and higher FSB / RAM ratio /timings.

Any idea or experience with the board? Can anyone confirm this?

Any ideas why my 2GB teamgroup PC5300 DDR2 667MHz 3-3-3-8 (TXDD1024M667HC3DC) shows "Team1024B-DDR2-667" as Part Number under CPU-Z?

see here: http://www.xtremesystems.org/forums/...&postcount=519

Otherwise either the RAM or the board is buggy.

Thanks in advance

Stylist
07-31-2006, 05:56 AM
Vengure

Stylist have you tried updatign the bios could be an issue there? Also I think i'd be more incline to think the board to be at fault. Test the ram in a friend system if you have someone close to you or test with a diff ram if you have some.
07-31-2006, 08:01 AM
Stylist

Quote:

Originally Posted by Vengure

Stylist have you tried updatign the bios could be an issue there? Also I think i'd be more incline to think the board to be at fault. Test the ram in a friend system if you have someone close to you or test with a diff ram if you have some.

I tried different versions (701/801/901 -> back to 801) without any positiv result.
In my opinion it's the combination of the ASUS P5W DH and the Teamgroup RAM (ratio/latency issue above FSB400 / DDR2 800).

Ones again:

Can anyone confirm that the RAM works with the ASUS P5W DH at high FSB without any problem or without the need to use "Auto" option or SPD timings in bios?

I can only use it above FSB 280 with 1:1 and Auto what means timings of CL 5-6-6-18.

Thanks in advance

Stylist
07-31-2006, 03:05 PM
Pjoeloe

Quote:

Originally Posted by Onepagebook

I did not get that;)

sended again
07-31-2006, 04:17 PM
Haltech

Quote:

Originally Posted by Stylist

I tried different versions (701/801/901 -> back to 801) without any positiv result.
In my opinion it's the combination of the ASUS P5W DH and the Teamgroup RAM (ratio/latency issue above FSB400 / DDR2 800).

Ones again:

Can anyone confirm that the RAM works with the ASUS P5W DH at high FSB without any problem or without the need to use "Auto" option or SPD timings in bios?

I can only use it above FSB 280 with 1:1 and Auto what means timings of CL 5-6-6-18.

Thanks in advance

Stylist

I cant get over 175 fsb with a Celeron D. Im waiting for my Allendale to show up.. I dont think its the ram. i think its the fricken board. I went back to 701.. If i leave timings to auto, i can hit 175.. if i try higher, i get stuck in this loop of default clocks and it wont go any higher than stock clocks.
07-31-2006, 04:24 PM
ocZZZ

I am at 190fsb with my extreme + ds3 + :banana::banana::banana::banana:ty celeron d
07-31-2006, 06:24 PM
Stylist

Quote:

Originally Posted by Haltech

I cant get over 175 fsb with a Celeron D. Im waiting for my Allendale to show up.. I dont think its the ram. i think its the fricken board. I went back to 701.. If i leave timings to auto, i can hit 175.. if i try higher, i get stuck in this loop of default clocks and it wont go any higher than stock clocks.

I use it with an retail Allendale (E6400 tray) and it does FSB400 and more but only with "Auto" settings in bios.

I think it is the board, too.

Stylist2002
07-31-2006, 06:36 PM
Haltech

Thanks for the heads up. I guess ill pick up a DS3 until a decent board is avail for my E6600.
08-01-2006, 03:54 AM
jpcastro

alo pppl

what do you think about this result?

http://img428.imageshack.us/img428/4...r420gk9.th.jpg

this was the best benchable that i could have, i dont understand the rest of the timings od DDR2 so left them in AUTO.

930D (almost default, it was only to see the max on ram) + DS3
ddr840 3-3-3-8
vdim a 2,4v
note - TRAS is 8 and not 9 like cpuz show´s, is a bug.

if anyone can help to get more fsb and better timings i´ll apreciate :)

regards
08-01-2006, 12:06 PM
Pjoeloe

Quote:

Originally Posted by andyisc00l

Teamgroup ddr2-667 3-3-3-8 / how high are these clocking with cas 4-4-4-x with 2.4 - 2.5v ?

Teamgroup ddr2-800 4-4-4-10 / how high are these clocking with cas 4-4-4-x with 2.4 - 2.5v ?

good question, I like to see an answer OPB :)
08-02-2006, 02:51 PM
Mako88

TeamXtream's customer service is crazy, they took care of a problem I had nearly instantly with no questions asked. That alone makes we a customer for life to be honest.

Special thanks also to TankGuys, they also went beyond the call of duty!

Will be testing the new TeamXtreme sticks over the weekend, can't wait. :)
08-02-2006, 03:10 PM
TeamUSOffice

Quote:

Originally Posted by Mako88

TeamXtream's customer service is crazy, they took care of a problem I had nearly instantly with no questions asked. That alone makes we a customer for life to be honest.

Special thanks also to TankGuys, they also went beyond the call of duty!

Will be testing the new TeamXtreme sticks over the weekend, can't wait. :)

I feel relieved when I see this message. :D

Ben @ tankguys is really the best distributor controller I ever work with since I got into this industry;which is about 8 years ago.
08-03-2006, 08:26 AM
wa77ss

Just put in my new TeamGroup kit for some testing .... :D

930D Presler
Asus P5WD2 Premium
2 * 512MB 3-4-4-8 DDR2-667MHz

Here is my first result -

Memory 2.2V | CPU 1.3750V

http://show.imagehosting.us/show/150...-1_1500786.jpg
08-03-2006, 09:07 AM
TeamUSOffice

Quote:

Originally Posted by wa77ss

Just put in my new TeamGroup kit for some testing .... :D

930D Presler
Asus P5WD2 Premium
2 * 512MB 3-4-4-8 DDR2-667MHz

Here is my first result -

Memory 2.2V | CPU 1.3750V

http://show.imagehosting.us/show/150...-1_1500786.jpg

Good Job wa77ss and thanks for been loyal to TEAM!
Tankguys.com still have about 27 sets of the old 512MB*2 DDR2 667 3-4-4-8 left. Just a reference for everyone.
08-03-2006, 09:23 AM
wa77ss

Team FTW !!! :p:

Anyways, more results, Ill continue to keep posting until I hit a wall ....

930D Presler
Asus P5WD2 Premium
TeamGroup 2 * 512MB 3-4-4-8 DDR2-667MHz
__________________________________________________
Memory @ 900MHz 2.2V 4-4-4-4 | CPU @ 4050MHz 1.3750V - Dual 32MB

http://img392.imageshack.us/img392/9...shot003uc0.jpg

__________________________________________________
Memory @ 1000MHz 2.3V 4-4-4-4 | CPU @ 3750MHz 1.3750V - Dual 32MB

http://img323.imageshack.us/img323/8...shot002ww6.jpg

_________________________________________________
Memory @ 750MHz 2.3V 4-3-3-4 | CPU @ 3750MHz 1.3750V - Dual 32MB

http://img121.imageshack.us/img121/5...shot004nu0.jpg
__________________________________________________
Memory @ 750MHz 2.3V 3-3-3-8 | CPU @ 3750MHz 1.3750V - Dual 32MB

http://img83.imageshack.us/img83/980...shot005mu7.jpg
08-03-2006, 10:04 AM
Gautam

This stuff is smokin'. I've got 4x1GB sticks, and three of them are virtually identical to one another. (Fourth is about 10MHz below) Obviously have been screened very vigorously. I wasn't expecting them to be nearly as fast or as consistent.

So far I've done SuperPi 1M at 430MHz 3-3-3 and 530MHz 4-4-4 with 2.4v.
08-03-2006, 10:32 AM
TankGuys

Quote:

Originally Posted by Gautam

This stuff is smokin'. I've got 4x1GB sticks, and three of them are virtually identical to one another. (Fourth is about 10MHz below) Obviously have been screened very vigorously. I wasn't expecting them to be nearly as fast or as consistent.

So far I've done SuperPi 1M at 430MHz 3-3-3 and 530MHz 4-4-4 with 2.4v.

I'm loving this Team memory. It's great to see all of you having such good luck with this stuff :)
08-03-2006, 10:52 AM
Gautam

I honestly didn't believe the hype until I saw it for myself. :D I'm sure you're loving how quickly they're flying off your shelves as we are of them falling into our hands. :p:

wa77ss, maybe try for 450 at CAS 3? Might actually be possible since you got single sided sticks. I have a feeling mine can do it once I get my board modded.

Btw Colbert owns. :D
08-03-2006, 11:01 AM
Miwo

wondering if anyone ordered the PC6400 4-4-4-8 vs the 3-3-3-8 stuff? Same chips, but higher bin ~ better results?

as if results are phenomenal already :D
08-03-2006, 11:05 AM
wa77ss

Quote:

Originally Posted by Gautam

I honestly didn't believe the hype until I saw it for myself. :D I'm sure you're loving how quickly they're flying off your shelves as we are of them falling into our hands. :p:

wa77ss, maybe try for 450 at CAS 3? Might actually be possible since you got single sided sticks. I have a feeling mine can do it once I get my board modded.

Btw Colbert owns. :D

Yep, I am trying CAS3 as I type this :D

And yes, Colbert does own :p:
08-03-2006, 11:06 AM
Gautam

Quote:

Originally Posted by Ramen

wondering if anyone ordered the PC6400 4-4-4-8 vs the 3-3-3-8 stuff? Same chips, but higher bin ~ better results?

as if results are phenomenal already :D

Several of my friends did in fact. One of them has hit 400MHz 3-3-3 solid with 2.2v.

Vapor posted here earlier as well, unfortunately his luck wasn't so good. Something like 370 3-3-3 and 450 4-4-4 IIRC. Might be a fluke or something else gone amiss.
08-03-2006, 11:34 AM
Pjoeloe

yes, andyisc00l asked this earlyer / edited :

Teamgroup ddr2-667 1GB / 512 mb 3-3-3-8 / how high are these clocking with cas 4-4-4-x and 3-3-3-x with 2.25 - 2.4v ?

Teamgroup ddr2-800 1 Gb / 512 mb 4-4-4-10 / how high are these clocking with cas 4-4-4-x and 3-3-3-x with 2.25 - 2.4v ?

basicly, what`s the difference in clocking :cool:

I think all the 4 chips will do 450 mhz cas 4-4-4 with 2.25 V guaranteed but I`m curious what the difference of these sticks is with cas 3-3-3-8 and all with the same voltage :)
08-05-2006, 10:43 AM
burningrave101

Quote:

Originally Posted by TeamUSOffice

Good Job wa77ss and thanks for been loyal to TEAM!
Tankguys.com still have about 27 sets of the old 512MB*2 DDR2 667 3-4-4-8 left. Just a reference for everyone.

I just ordered two of the 2x512MB 3-4-4-8 kits from Tank Guys since i need 2 gigs and that's about $50 cheaper then the 2x1GB modules and i'll get 4-way bank interleaving. The ones being sold from Tank Guys right now will still overclock to like 900-1000MHz+ won't they?
08-06-2006, 08:42 AM
logigamer

hi!

what are You thinking aboutthis modules DDR2 Micron D9GMH - TXDD1024M667C3DC?? OC over 1000 -4-4-4-x ??? is a chance?
08-06-2006, 09:23 AM
NiCKE^

Will do 500mhz if you use the 1000 divider during stock speed without a doubt.
08-06-2006, 09:50 AM
logigamer

so I on my DS3 and that results http://img128.imageshack.us/my.php?i...bestsigyt6.jpg i will by happy and i go up 1000mhz?
08-06-2006, 09:56 AM
Vapor

Gautam, all stability testing I did was with 200 percent coverage memtest stability...hence the lower results (though that stick was still on the low side...370 3-3-3 crashed the system). I'd bet something happened in transit as the other stick wouldn't boot. :(

THat all said....even if there was no shipping problem (didn't inspect before I sent the kit to RMA to get the DOA replaced) my results are still major outliers....all sticks so far have just been GREAT :slobber:
08-06-2006, 10:14 AM
andre X_X

2GB kit 667 3-3-3-8

http://img174.imageshack.us/img174/8...441225vbr8.jpg
08-06-2006, 11:35 AM
logigamer

Quote:

Originally Posted by andre X_X

2GB kit 667 3-3-3-8

http://img174.imageshack.us/img174/8...441225vbr8.jpg

holy .... nice nice nice :toast:

i hope so my TeamGroup 667 Micron D9GMH - TXDD1024M667C3DC (2x512) will go at this level ;)
08-06-2006, 12:43 PM
Vassili

I can buy these type's of memory:
TeamGroup PC5400 2048MB Dual-Kit
CL3,0-4-4-8 @ 333MHz/DDR2-667 EUR 204,95

TeamGroup PC5400 2048MB Dual-Kit
CL3,0-3-3-8 @ 333MHz/DDR2-667 EUR 234,95

TeamGroup PC6400 2048MB Dual-Kit
CL4,0-4-4-10 @ 400MHz/DDR2-800 EUR 259,95

I would like to have 4GB, so the 55 euro difference is actually 110 euro difference, that's alot...any suggestions? :)
08-06-2006, 05:07 PM
Pjoeloe

TeamGroup PC5400 2048MB Dual-Kit
CL3,0-3-3-8 @ 333MHz/DDR2-667 EUR 234,95

2x
08-06-2006, 07:07 PM
andyisc00l

anyone mind posting results for the 2gb kits ? The 667 and 800 kits..i can't decide between g.skill and team, how well do the team kits do with 2.4-2.5v?
08-06-2006, 07:09 PM
wa77ss

TankGuys, I hope you dont run out of the 3-4-4-8 1G kits by tommorow morning, cause thats when I am ordering the my second kit :D
08-06-2006, 07:17 PM
Pjoeloe

Quote:

Originally Posted by andyisc00l

how well do the 667 / 800 team kits do with 2.4-2.5v?

a question still nobody can answer :banana:
08-07-2006, 12:15 AM
thorgal

Quote:

Originally Posted by Pjoeloe

a question still nobody can answer :banana:

Patience my friend. Coming up in a few days :) Just wasn't ready yet to void the warranty ;)
08-07-2006, 03:05 AM
andre X_X

Quote:

how well do the 667 / 800 team kits do with 2.4-2.5v?

This is the 2gb kit of 667 3-3-3-8 test @ 2.44v (bios 2.5v)

CL3
http://img474.imageshack.us/img474/4...343825viq5.jpg

CL4
http://img58.imageshack.us/img58/411...441225vqq7.jpg

on 2.4v mostly it runs 5-7mhz lower
08-07-2006, 06:34 AM
logigamer

Team 2x1gb 667mhz 3-3-3-8 or Team 2x1gb 667mhz 3-4-4-8 will be better in OC? about 40$

or maybe team ddr2 800 ?
thanks
08-07-2006, 07:38 AM
andre X_X

mostly the same imo...
08-07-2006, 01:25 PM
logigamer

Quote:

Originally Posted by andre X_X

mostly the same imo...

take cheaper ?? :D
08-07-2006, 04:17 PM
Drunner611

Whats the maximum voltage on this ram before the warranty is voided? 2.2v?
08-07-2006, 04:18 PM
wa77ss

Just pick one, its all good stuff :p:
08-07-2006, 07:14 PM
andre X_X

Take what ever you like..... :)
08-07-2006, 07:21 PM
Lestat

hhmm so how does she do at CL5 ? w/ 2.4v ?

man i gotta get me some of this ugh... gskill HZ or TG ... TG or HZ ???

and someone for the love of god find out if this can boot on the DS3 since it only uses 1.8v stock.
the gskill HZ boots fine. so this is could be a deal breaker
08-07-2006, 08:48 PM
ivo0613

1 Attachment(s)

Quote:

Originally Posted by Lestat

hhmm so how does she do at CL5 ? w/ 2.4v ?

man i gotta get me some of this ugh... gskill HZ or TG ... TG or HZ ???

and someone for the love of god find out if this can boot on the DS3 since it only uses 1.8v stock.
the gskill HZ boots fine. so this is could be a deal breaker

I've tested it on P5B Deluxe w/ 0402 BIOS, 2.35v.;)
08-08-2006, 04:17 AM
aldamon

Quote:

Originally Posted by Lestat

and someone for the love of god find out if this can boot on the DS3 since it only uses 1.8v stock.

I already told you it does. I've been using this stuff on a DS3 for a week! :nono:
08-08-2006, 04:44 AM
smids

Quote:

Originally Posted by Drunner611

Whats the maximum voltage on this ram before the warranty is voided? 2.2v?

It says 2.2v on the pack but OPB said 2.3v is the rated.
08-10-2006, 03:42 PM
importpsycho

anyone running this on DS3?
according to
http://www.xtremesystems.org/forums/...d.php?t=110460
DS3 does not like D9...
08-10-2006, 05:18 PM
TankGuys

FYI Guys: We had to raise the Team memory prices a bit tonight, as supply costs have gone up (Team is charging us more). Just so you aren't surprised :)
08-10-2006, 08:16 PM
fhpchris

Ignore the time, I had other stuff open, and I didnt use system cache.

2.15v on Aopen 975.

http://www.sspmustang.com/OT/ram-run6.jpg
08-10-2006, 09:27 PM
Vett95wLT4

The ram is pretty wicked!
http://img152.imageshack.us/img152/2910/11485ah9.th.jpg
08-11-2006, 08:10 AM
ocZZZ

anyone care to share their ds3 ram settings with team 6667 2gb 3-4-4-8?
08-11-2006, 08:11 AM
ocZZZ

I am and it's running fine

Quote:

Originally Posted by importpsycho

anyone running this on DS3?
according to
http://www.xtremesystems.org/forums/...d.php?t=110460
DS3 does not like D9...
08-11-2006, 10:36 AM
logigamer

somobody can "translate" DS3 bios memory setting for language of memset965 ?? :) i cant recognize what is what .... :/
08-15-2006, 07:27 AM
Eastcoasthandle

photos results of DDR2 800 with P5W DH Deluxe please
08-15-2006, 07:35 AM
Gautam

How about this?

http://mysite.verizon.net/restflyg/s.../untitled3.jpg
08-15-2006, 07:39 AM
bullet2urbrain

Quote:

Originally Posted by Gautam

How about this?

http://mysite.verizon.net/restflyg/s.../untitled3.jpg

thats pretty nuts... more info tho pls.

Vdimm, mobo (Strap if applicable), CPU?

thanks and nice work
08-15-2006, 07:42 AM
Gautam

Presler 920, 2.4v, P5W DH, 1.65v VMCH, pretty basic. It's nothing special really I don't think, I bought two sets, and all four sticks came within 2MHz of one another or so. Very solid clocking ram for sure.
08-15-2006, 02:46 PM
logigamer

should I use 2 x spi32 or 1 spi32 at once ? i saw few screens with double spi running
08-15-2006, 03:19 PM
SlackeR

Quote:

Originally Posted by logigamer

should I use 2 x spi32 or 1 spi32 at once ? i saw few screens with double spi running

two loads more but gives worse times, due to cache sharing an stuff. So that is your decision :)
08-16-2006, 04:21 AM
havoxz

hi; i dno if this has been answered before but where do you get these? (american retailers preferably)
can't find them at newegg or tigerdirect :S
08-16-2006, 05:20 AM
UZ7

Quote:

Originally Posted by havoxz

hi; i dno if this has been answered before but where do you get these? (american retailers preferably)
can't find them at newegg or tigerdirect :S

http://www.tankguys.biz/team.php

There are other online retailers but this is the place where I bought mine.
08-16-2006, 07:41 AM
havoxz

Quote:

Originally Posted by UZ7

http://www.tankguys.biz/team.php

There are other online retailers but this is the place where I bought mine.

cheers! im sure there are quite a few retailers but the thing is im in australia so i dont know anything about american retailers; especially those that retail these particular set ! ;p
08-16-2006, 01:05 PM
Cranox

Quote:

Originally Posted by importpsycho

anyone running this on DS3?
according to
http://www.xtremesystems.org/forums/...d.php?t=110460
DS3 does not like D9...

No problem here , it boots with only 1.8v. ( celeron cpu atm , waiting 4 my E6700 )
08-16-2006, 08:45 PM
SMa

SPD is programmed so it boots on any mainboard.
But even if you manually set it on 669MHz 3-3-3-4 it's able to boot with only 1.8v.
08-17-2006, 06:58 AM
UZ7

Quote:

Originally Posted by havoxz

cheers! im sure there are quite a few retailers but the thing is im in australia so i dont know anything about american retailers; especially those that retail these particular set ! ;p

http://www.nintek.com.au/x/scripts/p...dcategory=1283
08-17-2006, 07:19 AM
Onepagebook

Too bad, all my conroe boards died in these 2 days consecutively,
I will have 800 and 1000 announce soon

well yes, ask Jason(mickeymouse, he truely did 1.9v ddr800 3-3-3-4 dual spi 8m completed passed.;)

http://www.ocxtreme.org/onepagebook/ja.jpg
08-17-2006, 08:08 PM
mkorpal333

How are the 667 3-3-3-8 doing on Asus P5B deluxe boards. I haven't seen any results on that board.
08-18-2006, 06:00 AM
fakhrain

everyone is showing off their Core2+Team combo

time for some little AM2+TeamDDR2 action

cpu : Orleans 3000+
m.b : Biostar Tforce 550
ram : 2x512MB Team Xtreem DDRII 667 3-3-3-8

SuperPi 32M - PASS

Vdimm : 2.1v (BIOS max)
http://img137.imageshack.us/img137/3892/32m21vgj7.jpg

Currently limited by processor as I don't want to push more cpu voltage on the stock cooling. Besides, the Tforce mobo does not support DDR800 divider, yet. Still waiting for my DFI Infinity to arrive.

Anyway I did some minor Vdimm mod (pencil trick) to my mobo, multimeter reading shows 2.41v. Will try on how tight it will go at the same speed.
08-18-2006, 09:28 AM
Pyr0

can anybody give me any tips on how to get a Gigabyte DS3 to even post with a DDR667 3-3-3-8 2GB kit?

as the board powers up, the fans spin and then there's a long beeeep.
after that it reboots and does the same thing over and over.

i've tried plugging in a 512mb stick of kingston and setting the frequency, timings and voltage to the rated values, but when i swap the memory for the teamgroup, it won't post and just beeeeeps at me :(

[edit] the Gigabyte DS3 is running on the F4 BIOS at the moment
08-18-2006, 05:02 PM
darkandlong

Quote:

Originally Posted by Pyr0

can anybody give me any tips on how to get a Gigabyte DS3 to even post with a DDR667 3-3-3-8 2GB kit?

as the board powers up, the fans spin and then there's a long beeeep.
after that it reboots and does the same thing over and over.

i've tried plugging in a 512mb stick of kingston and setting the frequency, timings and voltage to the rated values, but when i swap the memory for the teamgroup, it won't post and just beeeeeps at me :(

[edit] the Gigabyte DS3 is running on the F4 BIOS at the moment

Mine booted with a Celeron and the DDR667 Kit with BIOS F2 with no problems... Running F4 fine now.
08-18-2006, 05:06 PM
darkandlong

One question... Should I worry about the SPD info listed in cpu-z? My DDR667 3-3-3-8 kit has different info for each stick:

http://img243.imageshack.us/img243/1953/teamspdxl9.jpg

Should I care about this at all? Can't really test the OC or anything because I'm still running a Celeron. This is on a DS3 btw.
08-18-2006, 05:21 PM
fakhrain

i think it's better to RMA it since the pair are meant to be identical when it's really not

but i wouldn't really bother if both are running fine
08-18-2006, 09:05 PM
Supertim0r

this memory love my P5B DX

2.2v

http://simon.webideal.ca/Bench/team%201050.JPG
08-19-2006, 07:33 AM
Pyr0

Quote:

Originally Posted by darkandlong

Mine booted with a Celeron and the DDR667 Kit with BIOS F2 with no problems... Running F4 fine now.

Yup i believe i have some dead sticks :(
they were bought brand new but so far i have been unable to use them at all

i've tried them in a Gigabyte GA965P-DS3 and an Intel D975XBX "bad axe" and neither board will post with the Teamgroup memory plugged in :confused: :( :slapass:

gutted.... i was really looking foward to playing with these, guess i'll have to wait another couple of weeks until i get a replacement (working) pair :(
08-19-2006, 10:14 AM
Onepagebook

Quote:

Originally Posted by fakhrain

everyone is showing off their Core2+Team combo

time for some little AM2+TeamDDR2 action

cpu : Orleans 3000+
m.b : Biostar Tforce 550
ram : 2x512MB Team Xtreem DDRII 667 3-3-3-8

SuperPi 32M - PASS

Vdimm : 2.1v (BIOS max)

Currently limited by processor as I don't want to push more cpu voltage on the stock cooling. Besides, the Tforce mobo does not support DDR800 divider, yet. Still waiting for my DFI Infinity to arrive.

Anyway I did some minor Vdimm mod (pencil trick) to my mobo, multimeter reading shows 2.41v. Will try on how tight it will go at the same speed.

that's quite impressive;)
08-19-2006, 09:32 PM
Supertim0r

3D

1M
http://simon.webideal.ca/Bench/team%201140.JPG

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 11:28 PM.

XtremeSystems