Are there any winchester's with 1MB of cache?
Printable View
Are there any winchester's with 1MB of cache?
welcome Yot™ and Takemenow.
Takemenow - what cooling and stepping if you've got it. thanks
Dangerden RBX cooler, Heatercore (dangerdan) and a Dangerden ATI block, eiheim 1048 waterpump.Quote:
Originally Posted by flytek
Core: 0437 VPAW. batchnumer 128.
All this on a MSI K8Neo2, OCZ Rev.2 Platinum 1024 dc kit, that ram is pretty damn good :banana:
nopeQuote:
Originally Posted by =[PULSAR]=
I've got a 3500+ (DH7-CG 130 nm newcastle) with 1 gb of corsair pc4000 xms v3.3 and an MSI K8N neo 2. Max stable is about 2.53ghz got to 2.6 at 1.7v but I don't really know if it's really stable.
Is 1.7v even safe (bios 1.55v +10%). I need 1.65v or a bit less to get is stable to 2.5ghz (10*250). The mem goes to 260 at least but doesn't do 1T at this speed.
Can anyone tell me if 1.7v is safe enough to run at costantly. Load temps are about 50C-53C (according to corecenter, Pc wizard 2004 and MBM tell me 48-50C. Idle is 37C at 1.65v and 2.5ghz. I'm using bios 1.3 now caus I don't want to do a manual flash. With my radeon 9800pro 128 mb at 440/365 mem at 3-4-4-10-1T and 250*10=2.5ghz i get 22372 3D01 marks. Sandra scores are mem int/buff'd (6824/6767) CPU arithmetic Dryst/whetst (11514:3955/5157)
Spec's - Radeon 9800 pro, Dfi UT 250Gb board, AMD 64 300+, 512MB Corsair XMS Pc3200 @ 2-2-2-5
http://img53.exs.cx/img53/5606/Snap46.jpg
3400+ at 2900 on a dfi ut 250
i don't think i've hit the max for this chip yet
edit: this is untweaked. i know my superpi time is low.
http://www.johnshim.com/a64/3400at2900.jpg
Sorry to say but 34 sec is very bad for 2,9GHz.
Here's 33 sec at onl 2,55GHz:
http://www.xtremesystems.org/forums/...id=19612&stc=1
yeah sorry... i should edit and say it's not tweaked at all...
i just popped it in... and pumped the voltage up to 1.65 and just ran it...
i got 33 seconds with my 3200+ @ 2.6 so i know that this is low.
http://www.johnshim.com/a64/superpi2900.jpg
Here is my current records on SP1M and 8M on WinXP Pro 32bit:
DFI LP 250GB, 3200+ 130nm (CBAEC 0428RPMW)
http://koti.mbnet.fi/dani69/DFI%20nF...XP%2032bit.gif
http://koti.mbnet.fi/dani69/DFI%20nF...XP%2032bit.gif
Here is my latest overclock ! I running the memory a bit slow but the Cpu is at a nice clock with low temps. 36 seconds on a 3000+ is good right? btw this is aircooled on a Zalman Heatsink. any suggestions?
http://img104.exs.cx/img104/165/Overclock.jpg
Image Link dead.
Quote:
Originally Posted by Jew-Bagel
i got 34s in 1:1 with bh-5....give them more volts :D
Link fixed, btw what is this Bh-5 i hear so much about i have 512MB Corsair XMS pc3200 @ 2-2-2-5 should i think about getting something else?
Quote:
Originally Posted by Jew-Bagel
rev?
Here is mine,i will be getting my watercooling monday and will go for more.I love the MSI board,i read about how much trouble they were,but honestly i havent had any problems.I still have combinations i want to try but i like where its running at with 1t on the memory and 2.5 cas,but i will probably see what she will do after i get the water cooling system done,just waiting on the Fed X guy.lol.If i get her higher i will be back..
"If it aint fast enough,overclock it"
Stonecoldkilla
Well i tried to get the file size down so you will have to expand it...
I looked everywhere for a revision # but couldnt find it. Here's a link 2 what i bought. Is it Bh-5?? Should i return it and get something else. I am pleased with the current performance but im wondering if i can get more. I see these other people with 800 dollar chips and they r only getting like 4-5 seconds difference in super pi than what i am getting with my 150 dollar chip so i am quite amazed.
Overclocking is great!
http://www.newegg.com/app/ViewProduc...145-521&depa=0
I am getting 35sec at 250x10.0 1:1 @ 2.5-3-3-0-1T
I wonder if I can tweak the ram alittle bit more...
My latest cpu
together with the msi motherboard and dual set corsair 3500
super PI takes about 28 sec
http://www.tweakers.net/ext/f/45405/full.jpg
http://www.tweakers.net/ext/f/45570/full.jpg
tomorrow i get OCZ 3200 rev 2
A64 3200+ newcastle cooled by VapoChill LS (shot) and by Mach 2 @ r404 (superpi)
http://utenti.lycos.it/swarzy85/frequenza_max_vapo.jpg
http://utenti.lycos.it/swarzy85/Imma..._freq_prom.jpg
A64 3700+ Clawhammer cooled by Prometeia Mach 2 @ r404
http://utenti.lycos.it/swarzy85/Imma..._superpi29.jpg
(shot @ 3065Mhz)
http://people.freenet.de/funkflix/32k01.jpg
My settings for 3DMark01 benching! :)
Peter,Quote:
Originally Posted by petervandamned
That's the stepping I'm looking for. Where can I find someplace that will send me a particular stepping? I'd be willing to pay them a few bucks extra for the stepping I want. Thanks....nice chip btw :D
Sorry Dude got the cpu not from a store. I was from a used section, but was brand new in fact.Quote:
Originally Posted by TheDude
It's so hard to get your hand on good steppings
Ain't that the truth! I had 2 good contacts...both have moved on to bigger and better jobs now.Quote:
Originally Posted by petervandamned
:(
Can you SuperPI 1M for me...thanks :)Quote:
Originally Posted by GravediggA