Micron D9 GMH\GKX\JKH etc club

Printable View

Show 100 post(s) from this thread on one page

03-01-2009, 02:58 PM
EliTE22

1 Attachment(s)

here my new corsair doms pc2-8500 ver1.2 i have two 2x1GB kits same ram as last post:D
just playing around with all four sticks in:)
533 at 4-4-4-12 at 2.4v
03-01-2009, 03:23 PM
cdawall

4*1GB crucial+gskill D9GMH@2.2v

http://img.techpowerup.org/090203/Capture035.jpg

and i cant do 3-2-2-1 even with memset its an AMD K10 mem controller thing

http://img.techpowerup.org/090301/Capture062.jpg

http://img.techpowerup.org/090301/Capture060.jpg
03-01-2009, 04:13 PM
EliTE22

1 Attachment(s)

1300MHz four sticks D9s :D 2.4vbios
03-01-2009, 04:34 PM
radaja

nice one elite22.are those the dominators in your sig?
03-01-2009, 05:48 PM
cdawall

Corsair Dominator 2GB DDR2 -TWIN2X2048-8500C5D just found a set of these the user never pushed them over 2.1v :D
03-01-2009, 05:55 PM
EliTE22

Quote:

Originally Posted by radaja

nice one elite22.are those the dominators in your sig?

no, it 2x kits of 2x1GB stick of corsair dom pc2-8500 ver1.2 D9xxx ics:D

the ram in sig is a 2x1GB corsair dom pc2-8500 ver4.1 with powerchip ics
i first sets of D9's :D very nice:yepp:
03-02-2009, 05:56 AM
Mafio

my cellshock pc8000 gkx @1200 5-5-5-15 2volt rocksolid & my ep45 extreme

http://forum.hwproject.net/imagehost...be54cbe6b9.jpg
03-02-2009, 03:40 PM
Shiranui Gen-An

I just got in a kit of 2x1GB Ballistix 8500 16FD3 from eBay today, testing at 600MHz 5-5-5-15 on the 5:6 divider with 2.00V BIOS set. One hour+ in Memtest 86+ 2.10 and no errors :up:
03-02-2009, 06:12 PM
Ket

Makes me hate my Cellshocks. They need 2.28v to be stable @ 1200MHz. Maybe this set is just one of the GKX kits that loves voltage.
03-02-2009, 07:03 PM
Shiranui Gen-An

Quote:

Originally Posted by Ket

Makes me hate my Cellshocks. They need 2.28v to be stable @ 1200MHz. Maybe this set is just one of the GKX kits that loves voltage.

You have the 8000 C5 kit right? My departed set had two pretty mismatched sticks, one could do 1200 with about 2.05V and the other needed like 2.45V :rolleyes:
03-02-2009, 07:05 PM
Ket

Nope I have the 8000C4 kit.
03-02-2009, 07:13 PM
zsamz_

Quote:

Originally Posted by Shiranui Gen-An

I just got in a kit of 2x1GB Ballistix 8500 16FD3 from eBay today, testing at 600MHz 5-5-5-15 on the 5:6 divider with 2.00V BIOS set. One hour+ in Memtest 86+ 2.10 and no errors :up:

all my ballstix pc2-8500 need 2.02 real volts for 1220mhz 16fd3 16fd5
03-02-2009, 07:24 PM
Shiranui Gen-An

Quote:

Originally Posted by zsamz_

all my ballstix pc2-8500 need 2.02 real volts for 1220mhz 16fd3 16fd5

I have two other sets of Ballistix 8500, 16FD3 Tracers and 16FD5 regular, but those need 2.12V+.
03-03-2009, 07:40 AM
Mafio

my cellshock pc8000 pass 1 hour of memtest @ 1200mhz 5-5-5-15 with 1.92 volt.
i don't have any screen, but when my mobo return from RMA i will make some other test and post some screen. :)

@ket: biostar tpower i45 with cellshock pc8000 suck...
my cellshock on this mobo can't reach 1250mhz with very high voltage and timings...
on p5q they don't do better than 1050mhz with 2.4volt :rofl:
asus suck...

@all: someone of you know what chip is mounted on patriot viper pc9600 ELKN Nvidia edition???

thx
03-03-2009, 07:47 AM
Shiranui Gen-An

Quote:

Originally Posted by Ket

Nope I have the 8000C4 kit.

That's odd, those usually only need 2.00~2.10V for 600MHz C5. I'll glady take em off your hands :D I just recently missed a change to get a kit of Cellshock 1150s on eBay because I was too cheap to go for the Buy it Now price and got outbid :mad:
03-03-2009, 11:20 AM
fatguy1992

Could someone tell me why when I set 1T in the BIOS when it loads Windows it always says 2T? It did it on my P5E and it also does it on my UD3P. So WTF am I doing wrong?

Thanks
03-03-2009, 11:33 AM
Don_Dan

Quote:

Originally Posted by fatguy1992

Could someone tell me why when I set 1T in the BIOS when it loads Windows it always says 2T? It did it on my P5E and it also does it on my UD3P. So WTF am I doing wrong?

Thanks

I guess that the chipsets don't support it for DDR2, I have never seen it working on an Intel DDR2 board. The only boards I know of that can do 1T command rate are those based on NVidia's chipsets and ATI's RD600.
Oh and by the way, it's not even a real 1T command rate, it's correctly called 1N and 2N, I don't know the difference but that's what I was told. :(
03-03-2009, 11:41 AM
fatguy1992

Quote:

Originally Posted by Don_Dan

I guess that the chipsets don't support it for DDR2, I have never seen it working on an Intel DDR2 board. The only boards I know of that can do 1T command rate are those based on NVidia's chipsets and ATI's RD600.
Oh and by the way, it's not even a real 1T command rate, it's correctly called 1N and 2N, I don't know the difference but that's what I was told. :(

Thanks

I thought I was setting it wrong or something :rolleyes:

Anyway I wish manufactures wouldn't put settings into the BIOS what don't work, like that **** 3:5 diver on P45.
03-04-2009, 12:08 AM
CryptiK

Quote:

Originally Posted by Ket

Makes me hate my Cellshocks. They need 2.28v to be stable @ 1200MHz. Maybe this set is just one of the GKX kits that loves voltage.

Strange they are usually good sticks. Perhaps try another board.

Quote:

Originally Posted by Mafio

my cellshock pc8000 pass 1 hour of memtest @ 1200mhz 5-5-5-15 with 1.92 volt.
i don't have any screen, but when my mobo return from RMA i will make some other test and post some screen. :)

@ket: biostar tpower i45 with cellshock pc8000 suck...
my cellshock on this mobo can't reach 1250mhz with very high voltage and timings...
on p5q they don't do better than 1050mhz with 2.4volt :rofl:
asus suck...

@all: someone of you know what chip is mounted on patriot viper pc9600 ELKN Nvidia edition???

thx

When you set 1.92v BIOS what is the real voltage measured with a DMM? Asus boards don't all suck, my Cellshock kits all do DDR2-1200 @ 1.99v real (measured at slot with DMM) and they are 32M stable at DDR2-1302 @ 2.24v on the M2F and P5Q-Deluxe. P5Q-Pro is pretty low end, I wouldnt expect great things from it.

I still have to sort the sticks myself and make matched pairs.
03-04-2009, 01:27 AM
Mafio

Quote:

Originally Posted by CryptiK

Strange they are usually good sticks. Perhaps try another board.

When you set 1.92v BIOS what is the real voltage measured with a DMM? Asus boards don't all suck, my Cellshock kits all do DDR2-1200 @ 1.99v real (measured at slot with DMM) and they are 32M stable at DDR2-1302 @ 2.24v on the M2F and P5Q-Deluxe. P5Q-Pro is pretty low end, I wouldnt expect great things from it.

I still have to sort the sticks myself and make matched pairs.

i've gigabyte ep45 extreme

the voltage set in the bios is the same as the real voltage

on my asus p5q cellshock pc8000 gkx and cellshock pc6400 gmh can't reach 1100mhz with any timings and voltage...maybe my mobo is broken...
03-04-2009, 01:30 AM
Dumo

With CellShock @ 2.3V...

http://img93.imageshack.us/img93/4691/333g.jpg

http://img19.imageshack.us/img19/2699/3331v.jpg
03-04-2009, 04:56 AM
simone18

Quote:

Originally Posted by Mafio

i've gigabyte ep45 extreme

the voltage set in the bios is the same as the real voltage

on my asus p5q cellshock pc8000 gkx and cellshock pc6400 gmh can't reach 1100mhz with any timings and voltage...maybe my mobo is broken...

nice to find you here mate ;)
maybe this evening i'll post my screen. obviously not about RS, just OC :D

your p5q really sucks, what are you waiting for throwing it from the window? :p:
03-04-2009, 05:45 AM
Mafio

Quote:

Originally Posted by simone18

nice to find you here mate ;)
maybe this evening i'll post my screen. obviously not about RS, just OC :D

your p5q really sucks, what are you waiting for throwing it from the window? :p:

:welcome:

not my p5q sucks...all asus sucks. :D

i have another idea for this p5q :D :ROTF:
03-04-2009, 05:50 AM
CryptiK

Quote:

Originally Posted by Mafio

i've gigabyte ep45 extreme

the voltage set in the bios is the same as the real voltage

on my asus p5q cellshock pc8000 gkx and cellshock pc6400 gmh can't reach 1100mhz with any timings and voltage...maybe my mobo is broken...

So you've measured with a DMM? Eastytune6 isn't real voltage. There is definitely an issue with your board, but the vanilla P5Q's/P5Q-Pro's etc aren't great ram clockers.

P5Q-Deluxe is much better from what I've seen, but they are not as good at clocking ram as the EP45 or UD3P.

EDIT - what happened to your EP45?
03-04-2009, 06:07 AM
Mafio

Quote:

Originally Posted by CryptiK

SO you've measured with a DMM? Eastytune6 isn't real voltage. There is definitely an issue with your board, but the vanilla P5Q's/P5Q=Pro's etc aren't great ram clockers.

P5Q-Deluxe is much better from what I've seen, but they are not as good at clocking ram as the EP45 or UD3P.

yes, i have measured the real voltage with multimeter and that was the same as the voltage set in the bios. :)

edit: my ep45 is dead...main bios is corrupted and recovery procedure don't work...

Show 100 post(s) from this thread on one page