msi 790 fx-gd70 thread

Printable View

Show 100 post(s) from this thread on one page

02-10-2010, 09:55 PM
ah_khoo

Quote:

Originally Posted by beta

tweaking the imc doesn't help, i always get the same error immediately after starting blend. I tried to give the ram more volts (1.80v->1.95v) and it seems to stabilize blend for a few more seconds.

if instant fail in blend test, most likely due to nb/ram freq too high. may i know which version is ya dhx? i have d same model & d revision is 3.2, which according to corsair forum is using micron ic. d9kpt/v perhaps. :)

highest so far is 7-7-7-24 @ 1620, vdimm @ 1.85v... :shakes:

http://i49.tinypic.com/1rqh79.png
02-10-2010, 10:05 PM
Mavhenz

re

Quote:

Throwing spells are ya???? http://en.wikipedia.org/wiki/Witch_(disambiguation)

With all the funnin' aside, this has made for a good read.....just hope one will find its way into my household by this fall!

^^

Practice make perfect.
02-10-2010, 10:40 PM
beta

Quote:

Originally Posted by ah_khoo

if instant fail in blend test, most likely due to nb/ram freq too high. may i know which version is ya dhx? i have d same model & d revision is 3.2, which according to corsair forum is using micron ic. d9kpt/v perhaps. :)

highest so far is 7-7-7-24 @ 1620, vdimm @ 1.85v... :shakes:

i have rev 1.8 set with qimonda ics, running 7-7-7-24-28 1600 @ 1.80v.

nb freq was near stock.. before this newest beta i wasnt even able to post @ 1800, and now it's booting straight into windows at stock volts.. :shrug:
02-10-2010, 10:52 PM
ah_khoo

Quote:

Originally Posted by beta

i have rev 1.8 set with qimonda ics, running 7-7-7-24-28 1600 @ 1.80v.

nb freq was near stock.. before this newest beta i wasnt even able to post @ 1800, and now it's booting straight into windows at stock volts.. :shrug:

wow... i'm kinda impressed with ya ram coz from what i know qimonda doesn't really like tight timing & u managed a 1600 @ cas7 w/ stock volt... superb...:up:

used to own a pair of kvr running on qimonda ic, was able to reach 1650 @ cas9... :shrug:

r u able to memtest stable @ 1800? :)
02-10-2010, 11:30 PM
beta

Quote:

Originally Posted by ah_khoo

wow... i'm kinda impressed with ya ram coz from what i know qimonda doesn't really like tight timing & u managed a 1600 @ cas7 w/ stock volt... superb...:up:

used to own a pair of kvr running on qimonda ic, was able to reach 1650 @ cas9... :shrug:

r u able to memtest stable @ 1800? :)

I haven't tried a longer run yet, only ran memtest for a couple of minutes before I booted up windows and it seemed rock solid @ cl8. I will try again later.

qimonda = infineon ;) I think this is more about binning, than the brand of the ic.
02-11-2010, 10:07 AM
beta

after tweaking the ram some more it seems cl7 1800 is the most stable. cl8 / cl9 is instant fail in blend, auto settings (9-10-10) wont even let me into windows. @ cl7 blend errors on only one core, and only after the second test. :shrug:
02-12-2010, 05:30 AM
suurballe

Using same Corsair memory

Fully stable @ 1600, 7-7-7-20-27
02-12-2010, 07:28 AM
beta

nice. which rev?
02-12-2010, 11:50 AM
Cele303

Just boot stable, I need more time but big bios improvement finally

http://img18.imageshack.us/img18/8268/1800bootcr.jpg
02-12-2010, 02:22 PM
suurballe

Quote:

Originally Posted by beta

nice. which rev?

bios rev is 1.9 official
02-12-2010, 02:45 PM
beta

Quote:

Originally Posted by suurballe

bios rev is 1.9 official

i mean which rev are ur sticks?
02-16-2010, 06:13 AM
suurballe

Quote:

Originally Posted by beta

i mean which rev are ur sticks?

Dont know where to find rev of mem-sticks ?
02-16-2010, 07:17 PM
Entropicity

Quote:

Originally Posted by suurballe

Dont know where to find rev of mem-sticks ?

Its printed on the stickers on the sticks. Crosscheck the ver. number off the Corsair website to find out the mem chips used.
02-17-2010, 03:34 AM
suurballe

Quote:

Originally Posted by Entropicity

Its printed on the stickers on the sticks. Crosscheck the ver. number off the Corsair website to find out the mem chips used.

1.X Qimonda 64/128Mx8
2.X Elpida 64/128Mx8
3.X Micron 128Mx8
4.X Samsung 128Mx8
5.X Hynix 128Mx8
6.X Promos 128Mx8
7.X (PSC) 128Mx8
8.X Nanya 128Mx8
9.X Winbind A1-Die 128MX8

mine is 3.2, so -> Micron
03-10-2010, 09:18 AM
moorhen2

New beta bios's

New bios's coming thick and fast,2 today,,i have the changelogs for all 3 now:

A7577AMS.1A2 > A7577AMS.1A3

Fix W7 install fail if system build RAID and install MS-4256(USB3.0+Sata 6g).
Fix IDE Device detect order mistake if System build RAID and install MS-4256(USB3.0+Sata 6g)

A7577AMS.1A3 > A7577AMS.1A4

Update Raid OptionRom to v3.0.1540.59

A7577AMS 1A4 > A7577AMS 1A5

Change AGESA version from v3.5.4.0 to v3.6.9.0

Links to files:
http://www.ziddu.com/download/888377...S.1A3.rar.html

http://www.ziddu.com/download/890953...S.1A4.rar.html

http://www.ziddu.com/download/890953...S.1A5.rar.html

Latest beta's:

A7577AMS 1A5 > A7577AMS 1A6

http://www.ziddu.com/download/925742...S.1A6.rar.html

change AGESA version from v3.6.9.0 to v3.7.0.0

A7577AMS 1A6 > A7577AMS 1A8
http://www.ziddu.com/download/932989...S.1A8.rar.html

changelog to follow ASAP.
03-10-2010, 12:16 PM
FlawleZ

Thanks for the post moorhen2! One thing is for sure, MSI has been very good about updating the BIOS frequently on this board.
03-10-2010, 12:45 PM
moorhen2

Quote:

Originally Posted by FlawleZ

Thanks for the post moorhen2! One thing is for sure, MSI has been very good about updating the BIOS frequently on this board.

Thanks FlawleZ,they are very good to us at the moment,i have recieved 3 in the last few days,i will keep things up to date,as and when i can.:)
03-10-2010, 01:22 PM
crazydiamond

how bout an option to shut pc down if cpu reaches certain temp?
03-10-2010, 01:37 PM
Riska

it is in the bios under the hardware monitor
03-10-2010, 01:59 PM
moorhen2

Quote:

Originally Posted by crazydiamond

how bout an option to shut pc down if cpu reaches certain temp?

Most cpu's have thermal protection,once they reach a certain temp they will shut down, BSOD,well thats what i am lead to believe.
03-10-2010, 02:19 PM
crazydiamond

Quote:

Originally Posted by Riska

it is in the bios under the hardware monitor

what bios? i am on 1.7 from the site & only options there are "chassis intrusion", "cpu smart fan target", "sys fan 1 control",... through "sys fan 4 control"
03-17-2010, 04:50 AM
Panther57

Has anyone updated to MS4256... USB 3.0, Sata 6G..
03-17-2010, 08:44 AM
crazydiamond

Quote:

Originally Posted by crazydiamond

how bout an option to shut pc down if cpu reaches certain temp?

Quote:

Originally Posted by Riska

it is in the bios under the hardware monitor

Quote:

Originally Posted by crazydiamond

what bios? i am on 1.7 from the site & only options there are "chassis intrusion", "cpu smart fan target", "sys fan 1 control",... through "sys fan 4 control"

:shrug:
03-20-2010, 01:29 AM
PatRaceTin

anyone would go for msi 890FX ? i am waiting for it
03-20-2010, 01:46 AM
moorhen2

Quote:

Originally Posted by PatRaceTin

anyone would go for msi 890FX ? i am waiting for it

Yes the 890FX GD70 is due next month,ready for thuban,i will get one as soon as they become available in the UK.:D

Show 100 post(s) from this thread on one page