UnOfficial Asus Rampage II Extreme Thread

Printable View

Show 100 post(s) from this thread on one page

02-21-2009, 01:12 AM
BustaH

That does not look normal. heres a screen with single iram.

http://i33.photobucket.com/albums/d9...BYTE_i-RAM.png

ctslk1; your score above is insane, try running pcmark 05 with that raid set up, and check your xp start up score.;)

http://i33.photobucket.com/albums/d9...tdiskbench.png
02-21-2009, 01:24 AM
cstkl1

found out y
if i disable the the volume write back in the intel matrix
its back to normal around 400+mb
02-21-2009, 01:36 AM
BustaH

Quote:

Originally Posted by cstkl1

found out y
if i disable the the volume write back in the intel matrix
its back to normal around 400+mb

Could you do me a BIG favour please? can you run pcmark 05, and check the result details for the xp start up score with your velociraptor raid o set up.

i-ram gives me a really nice boost in score, im interested to see what those velocies do.:up: if you just run system suite only which is default settings for pc05.

I use the i-ram purely for benching, not sure if i should invest in velociraptors or not, I have a feeling your drives against a single i-ram may be slightly better, Id really like to know how much better if at all.

Edit, I should have said, plz if possible run @3.8 ht on or @4.2ht on thnx. so We can compare on a level.
02-21-2009, 01:50 AM
cstkl1

Quote:

Originally Posted by bustamove44

Could you do me a BIG favour please? can you run pcmark 05, and check the result details for the xp start up score with your velociraptor raid o set up.

i-ram gives me a really nice boost in score, im interested to see what those velocies do.:up: if you just run system suite only which is default settings for pc05.

I use the i-ram purely for benching, not sure if i should invest in velociraptors or not, I have a feeling your drives against a single i-ram may be slightly better, Id really like to know how much better if at all.

Edit, I should have said, plz if possible run @3.8 ht on or @4.2ht on thnx. so We can compare on a level.

np just have to download pcmark05
give a few minuts for me to do this
02-21-2009, 02:15 AM
cstkl1

http://i287.photobucket.com/albums/l...ntitled-30.jpg
02-21-2009, 02:19 AM
cstkl1

btw its with windows vista 64.
no optimizing or anything..

seems to be so so .
02-21-2009, 02:23 AM
Vega

Quote:

Originally Posted by dejanh

With Dominator sticks? No it won't. The sticks are too tall and hit the fan because of their massive HS. I tried it and it did not fit.

Thx...I will only use the blue slots so thats great news for me! :up::up:
02-21-2009, 02:34 AM
BustaH

Quote:

Originally Posted by cstkl1

btw its with windows vista 64.
no optimizing or anything..

seems to be so so .

I think you should be getting better than that for xp start up.

im getting 113mb/s with a single i-ram http://service.futuremark.com/compare?pcm05=1868941 on xp start up. you had ht off, would that make such a big difference? I dont think so as pcmark is not a multi threaded benchmark....I think?

http://i33.photobucket.com/albums/d9...5xpstartup.jpg
02-21-2009, 02:38 AM
cstkl1

nope checked some reviews
those scores are correct
ssd's are higher.
02-21-2009, 05:01 AM
BustaH

Ok thnx anyway for sharing the info.:up:
02-21-2009, 06:51 AM
DR3

Quote:

Originally Posted by marleyman

Has anyone with an Asus Rampage Extreme II (I am running an i7 965 at 3.81 temp not an issue) had imterrmittent problems with the Catalyst driver when using twin Shapphire (or any make) Radeon HD4870 X2s linked. I was running fine until I made the hugh misstake of upgrading to the latestest drivers. Now CCC will only see one the cards, although GPU-Z sees all four GPUs. Now when I go to play say HL2, Episode 2, on Steam I get all the way to the initial start page for the game and everything freezes and the steam engine quits. Any thoughts? I have gone so far as to re-install the operating system, Vista Ultimate, at which time everything worked fine for 48 hours but now I have the same problem again.

Bottom line from day one, CrossfireX on this particular board has been driving me nuts and I am ready for a single Nvidia 295. If anyone has dealt with the same problem please tell me what you tweaked and by how much to get stabilty before I go nuts trying to figure this out.

THANKS IN ADVANCE!!

I had almost the same problem, but mine was with crysis and warhead.
Found that disabling hyperthreading corrected most of the problem. The system would still crash and be touchy when booting. This was corrected by changing the Ultra E3 1000 for a Thermaltake 1200 Toughpower.
Now all the games run great and the system is very stable.

Hope that helps.
02-21-2009, 03:13 PM
dejanh

Quote:

Originally Posted by dejanh

Well, last night I changed the timings to 7-8-7-20-1T and this morning I could not boot. I will restore the timings today to 8-8-8-20-1T and will report back tomorrow on what are the results of the change. I am anticipating that I will boot successfully as was the case yesterday.

Well, as I have anticipated, I booted successfully this morning. Timings were 8-8-8-20-1T.

So, now I know this for my Dominators set at 1600MHz...

If I have timings at 7-8-7-18-1T I am 100% Memtest86+ and Memtest HCI stable once I boot, but a cold boot in the morning will always fail.

If I have timings at 8-8-8-20-1T I am also 100% Memtest86+ and Memtest HCI stable, and a cold boot in the morning will always succeed.

Now why in the heck would this be the case? Could it really be the PSU not being able to power up the ram at lower timings? Why would this occur? I have never seen behavior like this before.
02-21-2009, 06:32 PM
TopGun888

questions...

hi, i'm new here...

i have this motherboard sitting on my table waiting to be installed...

it's my first time assembling my own computer...

if i plug my ddr3-1600 memory into the motherboard will it automatically run at 1600mhz or do i have to set it in the bios?

has the cold boot problems been fixed?
02-21-2009, 07:03 PM
crazyea

nope, most likely you will have to set it manually. mine set for 1066 out of the box. your prob will as well. unless you have a 965xe, then it will run at 1333 default.
02-21-2009, 08:20 PM
headala

Quote:

Originally Posted by TopGun888

has the cold boot problems been fixed?

As far as I can tell, there's no definitive answer on that. It seems like some of them went away, some went away and came back, and some happen haphazardly.

One thing's for sure, this board sure is picky about which PSU (power supply) it likes!
02-21-2009, 08:50 PM
applescript

Hi if I get a random BSOD at times which says the problem is with disk.sys or fault in paged area..could it be due to insufficient voltage or due to my HD or other stuff?

cos i have heard that its highly possible to get a bsod when you overclock..i gt no errors with prime95, occt, orthos and linx...

so could it be other factors and not the OC tt is causing the BSOD?

i did not OC my memory or gfx card..only cpu...and i am running win xp x64..thanks
02-21-2009, 08:57 PM
TopGun888

Quote:

Originally Posted by crazyea

nope, most likely you will have to set it manually. mine set for 1066 out of the box. your prob will as well. unless you have a 965xe, then it will run at 1333 default.

oh ok thank you... which settings do i have to change? do i have to change "memory level up"?

Quote:

Originally Posted by headala

As far as I can tell, there's no definitive answer on that. It seems like some of them went away, some went away and came back, and some happen haphazardly.

One thing's for sure, this board sure is picky about which PSU (power supply) it likes!

i haven't got my power supply yet... would the Corsair HX1000W be good enough?
02-21-2009, 10:36 PM
posershadow

Quote:

Originally Posted by TopGun888

oh ok thank you... which settings do i have to change? do i have to change "memory level up"?

i haven't got my power supply yet... would the Corsair HX1000W be good enough?

You'll change the DRAM Frequency. And I run a hx1000 and I've never had a cold boot issue on my board, so far, knock on wood haha.
02-22-2009, 01:24 AM
TopGun888

Quote:

Originally Posted by posershadow

You'll change the DRAM Frequency. And I run a hx1000 and I've never had a cold boot issue on my board, so far, knock on wood haha.

oh... so i just go into bios and change "DRAM Frequency" from auto to "DDR3-1600"?

do i need to change anything else?
i'm not planning on overclocking my cpu for now... just want the memory to run at 1600...

thanks for your help! :)
02-22-2009, 03:03 AM
hiwa

Hi guys
i have a strage problem with my rampage II extreme
when i turn off machine or when it's need to C.cmos lcdPoster shows some numbers ( p80 00B1,p80 00B1 C0 ... ) after 30 seconds hang at p80 000C0 and i need to turn off power to pass the code,after reseted cmos and f1 in setup put all Voltage to highest possible :( so need to load default and save/exit
everytime it hangs need more than 2 minutes to do all steps
if anyone have this problem like me?
I tried all bioses :)

http://www.youtube.com/watch?v=deJH8T2Wc44
02-22-2009, 04:31 AM
cx-ray

Quote:

Originally Posted by TopGun888

oh... so i just go into bios and change "DRAM Frequency" from auto to "DDR3-1600"?

do i need to change anything else?
i'm not planning on overclocking my cpu for now... just want the memory to run at 1600...

thanks for your help! :)

In BIOS Extreme Tweaker menu (enters as default) set:
1)DRAM Frequency - 1600 or as close as it will permit
2)DRAM Timing Control - first 4 numbers according to DRAM manufacturer spec.
3)DRAM Bus Voltage - set to DRAM manufacturer spec

I recommend not using auto level up for CPU or DRAM when overclocking. ASUS has the tendency of setting the voltages too high. I wouldn't rely on X.M.P. profiles in DRAM either. Set things up manually to be safe and verify all auto voltages right after the system POSTS again with new settings.
02-22-2009, 02:32 PM
ZX2Slow

Is anyone seeing an issue where USB devices do not work under XP 64bit when using the X58/ICH10R 9.1.0.1007 drivers?
02-22-2009, 03:50 PM
davep

help!!!!

trying to boot my rampage 2, no luck

this is whats happening

When i plug the power cable in, the led on the mobo do light up and the external lcd poster screen comes up welcome and starts a timer (just counting up in time), then when i press the power button on the mobo itself, and then says welcome again and start the timer again (led on the soundcard comes on then off, & the fan controlers ,like it has power for a few seconds, then it turns it self off and the screen says something like power off

if you understand that
02-22-2009, 06:22 PM
headala

Quote:

Originally Posted by davep

help!!!!

trying to boot my rampage 2, no luck

this is whats happening

When i plug the power cable in, the led on the mobo do light up and the external lcd poster screen comes up welcome and starts a timer (just counting up in time), then when i press the power button on the mobo itself, and then says welcome again and start the timer again (led on the soundcard comes on then off, & the fan controlers ,like it has power for a few seconds, then it turns it self off and the screen says something like power off

if you understand that

My first thoughts:
1- take out all ram, drives, all but 1 video card, even sound; see what happens
2- plug a fan into the cpu_fan header just in case that's causing it to shut off; see what happens
3- switch the BIOS over to the other one via jumper; see what happens

Let us know if there is any change at all when you do those things
02-22-2009, 08:46 PM
jcniest5

Quote:

Originally Posted by davep

help!!!!

trying to boot my rampage 2, no luck

this is whats happening

When i plug the power cable in, the led on the mobo do light up and the external lcd poster screen comes up welcome and starts a timer (just counting up in time), then when i press the power button on the mobo itself, and then says welcome again and start the timer again (led on the soundcard comes on then off, & the fan controlers ,like it has power for a few seconds, then it turns it self off and the screen says something like power off

if you understand that

Possibly a grounding issue. Take the board out of your case and set it up outside and see if you can Power it on. Second option would to try a different PSU.

Show 100 post(s) from this thread on one page