ASUS Maximus Formula SE

Printable View

Show 100 post(s) from this thread on one page

11-03-2007, 09:23 AM
mXpS

Quote:

Originally Posted by cuke2u

Hi, turn off jmicron in the bios...
Chris

I disabled it in the BIOS but it still shows up when i'm booting. Does anything else need to be disabled?
11-03-2007, 09:37 AM
cuke2u

Quote:

Originally Posted by cuke2u

Hi, well I've just tested 2 of the 4 modules and they seem ok, I'll leave the other 2 running in a mo and report back my findings..
ChrisC

Hi, the other two also test out ok. Now going to try the blue module sockets...
ChrisC
11-03-2007, 09:41 AM
ShawnTRD

Quote:

Originally Posted by dMITIj

try update your BIOS before the install of OS, that help me when i was on to this MB

I'm on 0505
11-03-2007, 10:00 AM
Simkin

BIOS 0602 is out...
11-03-2007, 10:18 AM
Leeghoofd

Quote:

Originally Posted by Warboy

I wanna see HDTune and Other Hard Drive Benchmarks, P35 vs X38

Here they are, done all tests 3 times:
All test on same Hd's (Samsung 500GB HD S-ata ), Gskill ram at PC8000 5-5-5-15 and CPU at 3ghz ( 9 x333 )

HDtune P35

http://users.pandora.be/OAP/P5Ktune.JPG

HDtune X38

http://users.pandora.be/OAP/X38htune.JPG

Sisoft Read P35

http://users.pandora.be/OAP/P5KSREAD.JPG

Sisoft Read X38

http://users.pandora.be/OAP/X38SREAD.JPG

Sisoft File system P35

http://users.pandora.be/OAP/P5KSFile.JPG

Sisoft File system X38

http://users.pandora.be/OAP/X38SFile.JPG

If I compare X38 is a tat faster then P35 but by not much... I redone all tests 3 times and I got similar results
11-03-2007, 10:18 AM
kimandsally

Quote:

Originally Posted by Scope666

UPDATE: got home and BOTH SETS of the Corsair XMS2's are failing Memtest
So that's 1 stick out of 6 So either this board HATES this brand of RAM (even
though it's on the QVL) I have incredible bad luck, or there is some setting somewhere that I'm missing. I've tried pretty much everything on auto except for DRAM volts and vCore. I also have transaction booster off from what I've read here. These sticks say 1.9 volts, is that right, my Ballistix were 2.2. Anyone have these, what do you run them at. This is getting nuts!!!

Please post your timings and voltages so we can see if something stands out.
11-03-2007, 10:49 AM
Renegade5399

Scope I think you're experiencing the divider issue. And I doubt memtest will work right on this board.

As for me, I have gotten to 4GHz, 445*9 1.48v Core, 1.63v NB, 1.1 and 1.63 SB volts, 1.8 PLL volts, 1.55 FSB Term volts.

I am having issues with certain dividers as is most everyone else. This is easy to work around, but it would be nice if they fixed it.

Screeshot:

http://i131.photobucket.com/albums/p...20X38/4GHz.jpg

Sorry for the small CPUz font, I run 1600x1200. All temps are good IMO. The RAM does get overvolted by .1 volts, so watch that.

I would also like to add (coming from a 680i) that Loadline Calibration is by far the best feature ever. Sorry nvidia guys, but if you don't need SLI, this board is far superior than the 680i IMO.
11-03-2007, 12:35 PM
GAR

OK guys just got my BFG 8800GT OC, this thing is a overclocking monster, does 756/1836/2160 very easy, better performer than my 8800GTX overclocked even, wow, never thought so little money could buy me that good of a video card.
11-03-2007, 01:53 PM
-=j0nnyr0773n=-

Quote:

Originally Posted by Renegade5399

Scope I think you're experiencing the divider issue. And I doubt memtest will work right on this board.

As for me, I have gotten to 4GHz, 445*9 1.48v Core, 1.63v NB, 1.1 and 1.63 SB volts, 1.8 PLL volts, 1.55 FSB Term volts.

I am having issues with certain dividers as is most everyone else. This is easy to work around, but it would be nice if they fixed it.

Are those the lowest stable voltages you have been able to get? Is that much CPU PLL voltage actually necessary? I'd like to get about 420 x 9 since I can't get 450 x 8 to work and I am having issues with 420 x 9 but I think it will be more doable than 450x8. Also, is the the bios setting for cpu pll or the actual bios reading?
11-03-2007, 02:17 PM
Leeghoofd

Quote:

Originally Posted by Pete

Lads i made a bo bo. Pulled stock cooling off, guess what came off as well

http://img.photobucket.com/albums/v6...E/PA145400.jpg

Heheh i now have a naked X38.

The IHS is very very stuck to the stock HSF!

Pete you think that was awesome look at this guys piccies at post 6, I couldn't believe it was possible

http://www.hardforum.com/showthread....post1031617149
11-03-2007, 02:49 PM
weescott

:eek:

To think I was 2 minutes away from attempting to take off the heatpipe from my board.

I am really glad I didn't now!
11-03-2007, 02:56 PM
Leeghoofd

Well it's best done when you get the board out of the box, I did it after a few hours pf running and the putty was already very very sticky, needed half an hour slowly heating it up with a hair dryer, then gently turning it left right , each time a few mm's , then again hair dryer,.... mm's were gained till it popped off with IHS in place :)

Then another hour with Arctic Cleaning kit on the NB to get it cleaned... Never ever needed so much work to remove a heatsink, I hope this is not the goo Asus will use each time pfffffffffff
11-03-2007, 03:10 PM
Budwise

what problems are you guys having with the memory dividers?
11-03-2007, 03:45 PM
Scope666

Quote:

Originally Posted by Renegade5399

Scope I think you're experiencing the divider issue. And I doubt memtest will work right on this board.

As for me, I have gotten to 4GHz, 445*9 1.48v Core, 1.63v NB, 1.1 and 1.63 SB volts, 1.8 PLL volts, 1.55 FSB Term volts.

I am having issues with certain dividers as is most everyone else. This is easy to work around, but it would be nice if they fixed it.

Sorry for the small CPUz font, I run 1600x1200. All temps are good IMO. The RAM does get overvolted by .1 volts, so watch that.

I would also like to add (coming from a 680i) that Loadline Calibration is by far the best feature ever. Sorry nvidia guys, but if you don't need SLI, this board is far superior than the 680i IMO.

I was trying to run 1:1 most of the time. I started at stock 266, also tried 333 and 400. Same thing every time. I'm convinced I got a bad board. The restart issues alone are out of control. I shouldn't have to flip the power off on the power supply to reboot. Not to mention again the 5 out of 6 sticks that tested bad with this board in Memtest86+, Memtest (Windows) and two different versions of Windows Memory Diagnostic, all test fine on the 680i. Even Asus thinks it’s bad, from the restart issues alone. Not sure if I want to try another one or just live with the 680i for now. This board took 4 days of my life that I’ll never get back. ;-)
11-03-2007, 03:48 PM
cadaveca

alot don't work on 266FSB timings. 333 is fine, but I like266/400fsb/1000mem, and is currently hard to get stable. Secondary timings have to be set far too loose, and voltage far to high...I can pop everything in P35 and other and have no issues...

I mean, really, this chip is different, maybe these speeds don't work, but I get higher FSB on 266 than I do on 333 on all other boards for some reason, with elss volts.
11-03-2007, 03:52 PM
Scope666

Quote:

Originally Posted by cadaveca

alot don't work on 266FSB timings. 333 is fine, but I like266/400fsb/1000mem, and is currently hard to get stable. Secondary timings have to be set far too loose, and voltage far to high...I can pop everything in P35 and other and have no issues...

I mean, really, this chip is different, maybe these speeds don't work, but I get higher FSB on 266 than I do on 333 on all other boards for some reason, with elss volts.

Probably just growing pains, it's a VERY new chipset, and the BIOS is in its infant stages. It will probably take awhile before this thing starts to shine. My old P5b Deluxe was like that when it first came out, then it became a rock.
11-03-2007, 04:05 PM
safan80

has anyone managed to get their quad core up to 4Ghz with this board?
11-03-2007, 04:13 PM
OverClocker_gr

1 Attachment(s)

Quote:

Originally Posted by safan80

has anyone managed to get their quad core up to 4Ghz with this board?

me :D

This cpu at abit IP35 pro hit a wall ta ~3950 MHz

This is @ 4090(bumped the fsb with setfsb so the 3dmark didnt recognize the actual speed but the speed that the system boots into windowz)
11-03-2007, 04:15 PM
safan80

Sweet!

got a shot of your cpu-z info with ram settings?
11-03-2007, 04:16 PM
cadaveca

Quote:

Originally Posted by Scope666

Probably just growing pains, it's a VERY new chipset, and the BIOS is in its infant stages. It will probably take awhile before this thing starts to shine. My old P5b Deluxe was like that when it first came out, then it became a rock.

Yes, of course, but none of the other boards I had have had as many issues. It's kinda a love-hate relationship.:ROTF: I don't want a differnt board...I just want this one to work.:shakes:
11-03-2007, 04:18 PM
OverClocker_gr

Quote:

Originally Posted by safan80

Sweet!

got a shot of your cpu-z info with ram settings?

no.
The cpu it wasn't mine so these are only tests.
If i remember well it should be around ~607-609 at 5-4-4-5 and tight sub timmings
11-03-2007, 04:20 PM
safan80

what ram did you use?
11-03-2007, 04:21 PM
OverClocker_gr

Quote:

Originally Posted by safan80

what ram did you use?

OCZ 8500 SLi-Ready with D9GMH chips
11-03-2007, 04:34 PM
cliffy

Heres some results i just got at 3.915Ghz

http://i38.photobucket.com/albums/e1...y2006/01-1.jpg

http://i38.photobucket.com/albums/e1...ffy2006/03.jpg

http://i38.photobucket.com/albums/e1...ffy2006/05.jpg

http://i38.photobucket.com/albums/e1...fy2006/mem.jpg

http://i38.photobucket.com/albums/e1...fy2006/spi.jpg

Here is another couple at 4.05Ghz crashed during 3DMark 05 though so got some more work to do.

http://i38.photobucket.com/albums/e1...2006/40501.jpg

http://i38.photobucket.com/albums/e1...006/405mem.jpg

http://i38.photobucket.com/albums/e1...2006/405pi.jpg
11-03-2007, 04:39 PM
TheSamurai

GAR!!!! since the last clock i've managed to get 445x9 (not stable yet) and i'm now having the issues with prime not loading the cpu 99-100%. it's high 80's to low 90's. i think the vcore is at 1.57 according to probe. just wanted to get it stable and then work my way back.... but yeah, so i'm now having the same problem. we have definately got to figure this out. pretty much everybody has the issue now lol, i thought i disproved it about the board/cpu but i guess not. it just comes at different volts for others.

Show 100 post(s) from this thread on one page