:D :thumbsup:
Printable View
:D :thumbsup:
Fastest Socket A @ PiFast, eh 'Kumpel'? ;)
Whoops... seems not: umekami10 45.75 sec 3368 mhz memory 448 mhz Mobile Barton XP-M 2400+
Du hast noch was zu tun :D ;)
Still quite impressive... damn :slobber:
267x11.5 :slobber:
Very nice!
Maybe I'll g(e)t him, hehe ;)Quote:
Originally posted by Garrett
Fastest Socket A @ PiFast, eh 'Kumpel'? ;)
Whoops... seems not: umekami10 45.75 sec 3368 mhz memory 448 mhz Mobile Barton XP-M 2400+
Du hast noch was zu tun :D ;)
Still quite impressive... damn :slobber:
If I only could do 268 now. Maybe I'll go higher vdimm, am at 3.45V now... (but I am afraid the board won't do more)
P.S. Umekami has 300MHz more cpu clocks with the help of dryice :D
I've had the vdimm @ 3.5v... on EPoX 8RDA+ :D
You should definitely try higher!!
Stable or not, the scores count!!!
It's not that I didn't have the voltages this high, I would run 3.5V 24/7 if it would gain me something... but it seems not with those nforce2 boards as they're limited by heat and other chipset internal features...Quote:
Originally posted by Garrett
I've had the vdimm @ 3.5v... on EPoX 8RDA+ :D
You should definitely try higher!!
Stable or not, the scores count!!!
P.S. Due to a short in vdimm mod I had aleady 3.88V there and it did not load windows (bluescreen) :D
Quote:
Originally posted by SAE
Good job :):toast:
Thanks umekami.Quote:
Originally posted by umekami10
Good job :):toast:
P.S. YGM :D
Ok.. I will post this one...
Asus P4C800-E Dlx (all mods)
P4C 2.8C M0 stepping
OCZ PC4200 EL (2x256Mb) @ 2.5-4-4-7 (3.25v Vdimm)
Cpu Cooled with Prometia Mach I (completely stock).
Enough is enough m8.. you make me look noobish :mad:Quote:
Originally posted by SAE
:D :thumbsup:
Got a small update :)
http://users.tpg.com.au/spark69/an50r/pifast41.20.jpg
gotta try a few more runs and see if I can crack that 41 sec barrier
Also a small update:
http://members.home.nl/youpy/a64prom6_small.jpg
nice one hag6br
mines close spec wise to your setup
2.8C SL6Z5 MO with SP94 + 92x38mm Sunon 120cfm fan
Asus P4C800-E rev1.02 1016 bios stock NO mods
2x 512MB OCZ PC4400 Performance Series DC kit @ 280mhz 3-4-4-7 at 2.85v vdimm
Win2k PRO SP4 OS
http://www.fileshosts.com/pentium4/D...-36/pifast.jpg
Hehe. Did not wanna make you sad ;) I like you Fewture and we have very similar systems... :thumbsup:Quote:
Originally posted by Fewture
Enough is enough m8.. you make me look noobish :mad:
I can go higher too :D
But it's not always stable, cr*p DFI LP :rolleyes:
Update :D
Try me :)Quote:
Originally posted by Endre
I'll see what I can do, although I only have an MCX462-V to cool with, and it's getting hot here now.
Which program do you guys get the higher CPU speed in, SuperPI or Pifast? I could do SupePI 1M up to 2815 or so last night... hope to get something like that later today in Pifast.
Saw at Ministry that HaLDoL has 50.43 with aircooled M2500. I'll try to beat that first. :)
nice cpu overclock, a bit more fsb and you'll go sub 50 in no time.
I did some tweaking, and I would at least have got you... but then, dead NF7. :(
But I'll get a Mach 1 now (around June 10), then I hope sub 50 won't be a problem. :) It's getting too hot for good results with air now, it will be a relieve.
A few more tweaks and I cracked that 41 sec barrrier :banana:
http://users.tpg.com.au/spark69/an50r/pifast40.80.jpg
Now whats it gonna take to break 40 sec with non-FX chip :D
Hi Cpulloverclock,Quote:
Originally posted by cpulloverclock
I have a job for u
try a
- 1M digits of PI and u'll get a 26s like Hideo
http://www012.upp.so-net.ne.jp/ohij2/2350-26.gif
- 8M digits (05'04 to beat) http://www.geocities.co.jp/SiliconV...fx/504-3199.gif
- cpumark (376 to beat)
http://www.coolaler.com/~coolale/3010_32mtop.gif
many challenges
now I have finaly done 24 sek i M1 as you can see in the SuperPi sektion.:banana:
What is the CPUmark record now?
Just done this:
3402 Mhz
Fast CPU speed but slow mem timings.
The SK8V sometimes make "jump" in multi/FSB
Nice, Tom :D
7.5sec faster than me, but I am the no.1 AXP in pifast, hehe...
I wonder what you're able to get with those S939 in the near future ;) (mem can go way faster then and that's what rocks pifast)
Little bit improvement with bios settings :p:Quote:
Originally posted by rude
Here is my quick test with slow CG-stepping
http://koti.mbnet.fi/rude1/Kuvat/A64/45.08.PNG
http://koti.mbnet.fi/rude1/Kuvat/A64/A64_43.94.PNG
Here's my best attempt thus far.
Very nice, Pkrew!Quote:
Originally posted by pkrew
Here's my best attempt thus far.
Thanks bud, looks like you're kicking some major butt there. Sweet scores :toast: