Love the demotivational poster look of ur pics!!!!Quote:
Originally Posted by HazChem
Printable View
Love the demotivational poster look of ur pics!!!!Quote:
Originally Posted by HazChem
I started sleaving my Ultra X3 psu. I started with pin 24. One end has two wires to the same plug. The other end has a wire in pin 17 and 24. What end gets what? I would think the two wire pin would go to pin 24 on the psu end and 17 and 24 on the board end. But I don't want to screw this up. To make it worse all the wires are black. LOL
I am sorry, your post is unreadable. I keep trying but all I see is thong thong thong. :ROTF:Quote:
Originally Posted by BlaZ1n.IVXX
Im sorry thank my wife for that.Quote:
Originally Posted by DarthBeavis
Well I am about done sleeving the rest of the 24 pin. I guess I have a 50/50 shot at getting the correct. If not I guess it's time for a new board. lol:shrug:
I did call Ultra and ask them about it. Gess how much help they are. I did find out that my warranty was shot. Thats cool.
Fixed:Quote:
Originally Posted by BlaZ1n.IVXX
http://img121.imageshack.us/img121/3023/minec.jpg
If you are going to sleeve PSUS you need to invest in a PSU tester. :up:
Did you just sleve the thong? That gives me an idea. A very very very bad idea. Thank you.Quote:
Originally Posted by DarthBeavis
I do have a psu tester. It's called smoke or no smoke. I am Xtreme baby.
thank you:up::up::up:Quote:
Originally Posted by Earzz
Some nice looking sleeving going on here! New to the site, and I'll be posting pics of my build soon.
BTW, Thank you Nils for the bit of black sleeving you included in my recent order! And you were correct in deciphering my identity...
Oh - welcome to XS :D
Hay Nils I am really glad you found a way to give fhantastic some time off, the man really needed it.Quote:
Originally Posted by kgtiger
However I didn't really understand fhantastic last photo, he seamed a bit bent out of shape, you know, it's like he wants to kill something.
I thought a brake from work, a day off, just some time to loosen the sleeving so to speek would have done the man a world of good.
But then, I looked at this,
I must say Nils, I felt a little un-settled, like something had pushed him to far, you know what I mean, like something had just frayed his sleeving.Quote:
Originally Posted by fhantastic
But then, I found out why his sleeving was in such a knot.
After looking at fhantastics home video from his day off.
I mean, hell this would be enough to break any mans pin remover.
Thanks for the link Nils, I sure after looking at this everyone will understand the challenges fhantastic has endured and will be sympathetic to his needs.I know you did mate, all we can do now is hope that his heat shrink has a firm grip on his sleeving.Quote:
Originally Posted by dualbrain
Only time will tell.
Just keep a close eye on him for us will you.
Thanks mate.
With such "long" shrinks no problem...Quote:
Originally Posted by kgtiger
http://www.abload.de/img/netzteil3sngaj.jpg
http://img10.imageshack.us/img10/6498/2copydf.jpg
I'm out of left overs too now. :shakes:
Lucky it's only for my temporary build.
Some results, but still not finished. Need one more sleeve-kit :)
Also, waiting for new lense for my camera, because that one was dropped and focus won't work well, sometimes.
http://s39.radikal.ru/i086/0912/21/51945aa2f87c.jpg
PSU cables + fans cables in case require more then one sleeve kit, so i'll place another order soon.
http://i060.radikal.ru/0912/f8/b630e9a1c33b.jpg
My small 22cm PSU :) (reallly silent, even under load)
http://s40.radikal.ru/i090/0912/31/887e58ecc760.jpg
SATA sleeve + small sleeve used for split every 2 FAN cables .
http://s58.radikal.ru/i159/0912/22/1d086fa443f3.jpg
MDPC-X clips are really top :) Thanks Nils :up:
http://s15.radikal.ru/i188/0912/33/3830dfeb9a5c.jpg
SATA, HDD led, Power led, etc...
http://s47.radikal.ru/i118/0912/a4/944fd42297da.jpg
24 pin cable, 6+8 VGA, actually as you can see I've used large heatshrink over 8pin VGA, the reason is doubled cable in one pin. Also, silver sleeve looks ugly here a bit , so i'll re-sleeve it when receive black again.
http://i005.radikal.ru/0912/b6/26bddc3bf3bb.jpg
http://i050.radikal.ru/0912/5c/275b4f153821.jpg
http://s47.radikal.ru/i116/0912/6e/b506693cd793.jpg
Nils, I need mooore :) Also thank you for "demo" cut off of grand blue small sleeve. It's looks really good, much better than silver (as you can see it used)!
(color of grand blue small sleeve on the pics above are really different from live, sure it can be fixed in Photoshop, but I'll make all pics again when receive new lense :) )
Whaat da F?!?? Is there huge 999-pin ATX power connector at the end??Quote:
Originally Posted by fhantastic
:rofl::rofl::rofl::rofl:
nooo its only sleeve :D
fhantastic last photo roxxxxxx really nice
really nice photo's andy2kfi but can you show the back off the motherboard tray when you mounted it in the case. I am really curious about how you will rout the 24 pin through the case
keep up the good work :toast:
Um... fhantastic? I think the sleeving is eating your motherboard... might wanna stop it :)
Great pics by the way!
-TadZilla
the sleeve tsunami will destroy everything :rofl:
Got a question, and I'm sure someone here can help. I'm trying to purchase some sleeving from from MDPC and I can't get the price to change from EURO. Maybe I'm a little confused, but do we just convert and calculate how much we send through paypal or do they have to change something in my account for me to see the "correct" price. Thanks!
paypal will calculate it for you ;)
Petrucci, I am not sure I understood your question correct, but shop makes request to PayPal for charge in euros and then PayPal charges your card in currency of your card using PayPal conversion rates or your bank conversion rates (I have this options in PP account).
Hope this is what you are asking :shrug:
:rofl: Forget asteroids, crazy weather, or nuclear war... the world will end up be swallowed by MDPC Small Sleeving...Quote:
Originally Posted by fhantastic