kool
Printable View
kool
I love that tach, amazing idea.
C'DaleRider what tubes u use ? I see bend on CPU-NB tube....
Very nice. Good attention to detail!
I have a single device and 2 device silver round cables I'm not using if you're interested. I think it would look better in place of that blue ribbon cable.
If you're interested, PM me, I'll send one to you no charge.
nice system C'DaleRider
Here's mine. I'm not quite done yet, but the inside is close.
iadstudio, what NB cooling are you using?
The tubing is Tygon 3603 in 3/8" ID-1/2" OD. No matter how I tried to lengthen or shorten the tubing, it always developed a kink, so I put a ziptie where it kinks....about 99% is gone now and really doesn't seem to be hurting my temps.Quote:
Originally Posted by rafwlkp
I'm getting high 50's at load (a Xeon X3210 OC'd to 3.4GHz) and mid-to-upper 30's at idle. I'll take those temps.
I guess the solution is to run the tubing from the upper barb on the cpu block to the NB block, but hate to drain it right now. Probably will get to it eventually, though.
thermalright hr-05-ifxQuote:
Originally Posted by ceemic
My VERY ugly p180b Build:
http://photos-d.ak.facebook.com/phot...15267_8945.jpg
http://photos-b.ak.facebook.com/phot...15265_8330.jpg
Sorry for the poor quality. I only have a camera phone at the moment.
This is my first build and it was completed over a period of months. I had to keep buying parts b/c I basically forgot what I need for a build, lol. I haven't build a computer since 05 and I had most of the parts on hand and most of it was recycled.
I know its VERY ugly inside. It was originally a very clean build, but as I kept adding stuff, I figured I'd just let the inside go to hell b/c I didn't feel like making it look pretty, especially considering the side of the case stays on 24/7. Its a nice case, but cramped for water cooling, especially w/ a large pump. The only positive about having such a large rad and high performance pump is that I can run prime 95 24/7 w/o turning the fans up and the CPU never reaches a critical temp limit. My house is around 72*F usually, although my room is between 72 and 74*F.
BTW, I do have 3 fans on the radiator. I was waiting for another 2 in the mail at that point.
Anything with a Quad OC'd like that is allowed to be ugly!Quote:
Originally Posted by Synthetickiller
The more useful it is, the uglier its allowed to be. Theres an equation for it I'm sure.
@Synthetickiller are you using HDR in your photos?hehehe:)
lollQuote:
Originally Posted by giorgos th.
I wish I knew what HDR is. If I did, I'd probably find it funny. Ignorance sucks.
I used a camera phone and a camera spot light to take those pictures. :D
i think he's talking about high dynamic range...?
Yeah, high dynamic range lighting. It's used in games like half life 2 and crysis (I believe? All of the newer stuff mostly). It makes the lighting effects more realistic. Sometimes it can look too white or overexposed.Quote:
Originally Posted by TheSamurai
Thats only one aspect of it. The other really big one is in photography.
I would like to know what did you do to fix the radiator to the case top ? I have a CM WaveMaster and I will get a PA120.3 on the top. I'm still trying to find how to do this as clean as yours.Quote:
Originally Posted by C'DaleRider
System update..
New pump new blok new rad new tubes new Reservoir
Old System
Aqua Cuplex XT Blok-Aqua Airplex 360 Rad- Eheim 1000l pump- 1/4 tube
http://img73.imageshack.us/img73/356...d174sd7.th.jpghttp://img73.imageshack.us/img73/756...d177na1.th.jpg
New System
Swiftech Apogee GTX Extreme | Swiftech MCR-320 Radiator | Swiftech MCP655-B Pump | EK-RES200 Reservoir
http://img230.imageshack.us/img230/3...h001mr6.th.jpghttp://img230.imageshack.us/img230/2...h007tz5.th.jpghttp://img250.imageshack.us/img250/7...h010cj2.th.jpghttp://img250.imageshack.us/img250/2...h022nq9.th.jpg
http://img47.imageshack.us/img47/651...g036vj5.th.jpghttp://img509.imageshack.us/img509/2...g025tj5.th.jpghttp://img265.imageshack.us/img265/6...g031fj8.th.jpghttp://img509.imageshack.us/img509/7...g034in2.th.jpg
http://img47.imageshack.us/img47/915...g041qn0.th.jpghttp://img253.imageshack.us/img253/4...g046vw4.th.jpghttp://img253.imageshack.us/img253/8...g050fg9.th.jpghttp://img61.imageshack.us/img61/780...g053ol9.th.jpghttp://img146.imageshack.us/img146/7...g055gb0.th.jpg
http://img61.imageshack.us/img61/931...g059vl6.th.jpghttp://img146.imageshack.us/img146/7...g066nt4.th.jpghttp://img61.imageshack.us/img61/332...g074fk4.th.jpghttp://img146.imageshack.us/img146/7...g076tn1.th.jpghttp://img146.imageshack.us/img146/6...g082qx5.th.jpg
what you think ?
Looks great!
PS: It's Reservoir. Not "Rezervuar" ROFL! :p:
thx ;)
Looks too much air bubbles in water...
They'll bleed out, if its a new system just put together there will be bubbles.Quote:
Originally Posted by ceemic
I'm guessing that you don't travel too often with that case? lol
My latest:
http://www.conman.se/PICT1970liten.JPG
http://www.conman.se/PICT1973liten.JPG
http://www.conman.se/PICT1975liten.JPG
http://www.conman.se/PICT1980liten.JPG
http://www.conman.se/PICT1982liten.JPG
http://www.conman.se/PICT1983liten.JPG
http://www.conman.se/PICT1986liten.JPG
http://www.conman.se/PICT1987liten.JPG
01: 68203
http://service.futuremark.com/compare?2k1=9268086
03: 43655
http://service.futuremark.com/compare?2k3=5550549
05: 24019
http://service.futuremark.com/compare?3dm05=3532772
06: 13974
http://service.futuremark.com/compare?3dm06=3288630
Spec: P35-DQ6, Q6600 B3, 2x1Gb Kingbox, Powercooler x2900xt
exactly..Quote:
Originally Posted by SparkyJJO
no i'm not travel with my case..
Nice Box CoNMaN
You did great man. That is gonna look cool when it starts lighting up :D
what about me CyberDruid
You made a great improvement over your previous loop. Your loop kind of sprawls all over though...I think your next phase would be to work out how to mount it all onto the case...unless of course you like it like that.Quote:
Originally Posted by Atrin
It's a large case so I don't se any trouble getting moost if not all of the loop into or onto it.
CyberDruid,Quote:
Originally Posted by CyberDruid
Amen to that. Your work is appreciated, at least by me.
I think that's hilarious and so true of this forum.Quote:
"Just out of curiousity" since when is it mandatory for every one of your posts to either have something mean or sarcastic to say? Where are your builds? Where are your "credentials?"
Can't wait till I can alter my User Title :)
Cyber, you have one of the best ideas for customizing cases so keep em coming!
sorry to quote pics but that pump pushing the blue liquid looks like it could have the top inlet used instead... :)Quote:
Originally Posted by egraphix
great setup.
both could, and both should.
CD, Has Tribal hooked you up yet, concerning that res?
CD also note what Tribal is working on for new editions of the spinners . . .gaskets:Quote:
Originally Posted by Waterlogged
http://forums.pcapex.com/project_wor...olution-7.html
Using modded tops are pointless without the use of the top inlet--the 1/2" capability doesn't add any noticeable performance increase (see Cathar's testing in the sticky section). unless, of course, you just wanted a visual appeal...Quote:
Originally Posted by stormshadow
I think that is what he was going for, looks good too.Quote:
Originally Posted by TheJollyFellow
Thanks for asking.Quote:
Originally Posted by Waterlogged
T O has been great. He stands behind his work 110%: my kind of guy. He has sent a number of emails detailing his progress and basically rebuilt the entire reservoir saving only the coil. He reworked the base and the inlet outlet to better cycle the fluid and propel the coil inside the reservoir. I will be sure to post some shots of his improved reservoir.
@ Darth. Sounds great. But TBH I prefer fused acrylic...when done carefully it is unbeatable.
The Reservoir is a work of acrylic art. It has been a pleasure dealing with T O and I am actually looking into obtaining some of the RMAed spinners to have them repaired as T O said he would gladly repair them.
To my mind you can't expect any better service than that. :up:
This is my last proyect :d
http://img258.imageshack.us/img258/8...ing0vo2.th.jpg http://img168.imageshack.us/img168/5...ing0fw7.th.jpg http://img204.imageshack.us/img204/6...ing0rm3.th.jpghttp://img526.imageshack.us/img526/5...ing0vr3.th.jpg http://img225.imageshack.us/img225/3...ing0gp7.th.jpg
http://img227.imageshack.us/img227/7...ing0qa0.th.jpg
http://img223.imageshack.us/img223/1...ing0bq3.th.jpg http://img527.imageshack.us/img527/1...ing0lg4.th.jpg http://img88.imageshack.us/img88/755...ing0fn2.th.jpg http://img168.imageshack.us/img168/3...ing0ta6.th.jpg
http://img223.imageshack.us/img223/6...ing0ky0.th.jpg http://img221.imageshack.us/img221/9...ing0ko6.th.jpg
http://img229.imageshack.us/img229/7...ing0mj0.th.jpg http://img526.imageshack.us/img526/5...ing0cx7.th.jpg http://img527.imageshack.us/img527/3...ing0py7.th.jpg
http://img210.imageshack.us/img210/3...ing0do9.th.jpg http://img527.imageshack.us/img527/9...ing0mi4.th.jpg http://img514.imageshack.us/img514/8...ing0yg0.th.jpg http://img146.imageshack.us/img146/2...ing0az5.th.jpg http://img261.imageshack.us/img261/3...ing0tj1.th.jpg http://img526.imageshack.us/img526/6...ing0oz9.th.jpg http://img223.imageshack.us/img223/3...ing0xy0.th.jpg http://img406.imageshack.us/img406/2...ing0rp7.th.jpg http://img233.imageshack.us/img233/6...ing0md9.th.jpg http://img219.imageshack.us/img219/1...ing0gs0.th.jpg http://img217.imageshack.us/img217/7...ing0kh9.th.jpg http://img212.imageshack.us/img212/2...ing0cd3.th.jpg
http://img225.imageshack.us/img225/1...ing0tl3.th.jpg http://img213.imageshack.us/img213/2...ing0zj1.th.jpg http://img225.imageshack.us/img225/3...ing0dh3.th.jpg http://img528.imageshack.us/img528/6...ing0bx4.th.jpg
http://img219.imageshack.us/img219/9...ing0rj1.th.jpg
More :d
http://img296.imageshack.us/img296/3...0052vu9.th.jpg
http://img296.imageshack.us/img296/8...0053nv1.th.jpg http://img230.imageshack.us/img230/9...0067sq5.th.jpg http://img230.imageshack.us/img230/3...0056xx7.th.jpg http://img230.imageshack.us/img230/8...0059uw9.th.jpg http://img230.imageshack.us/img230/8...0059uw9.th.jpg http://img296.imageshack.us/img296/7...0060lp1.th.jpg
http://img296.imageshack.us/img296/8...0054cr1.th.jpg http://img230.imageshack.us/img230/7...0058yu0.th.jpg
Buy not.. More :d
http://img146.imageshack.us/img146/4...0001qn6.th.jpg http://img233.imageshack.us/img233/8...0002sd6.th.jpg http://img406.imageshack.us/img406/4...0003jk6.th.jpg http://img403.imageshack.us/img403/8...0007kt7.th.jpghttp://img221.imageshack.us/img221/5...0004kz2.th.jpg http://img406.imageshack.us/img406/3...0005ff8.th.jpg http://img441.imageshack.us/img441/6...0008cn1.th.jpg http://img218.imageshack.us/img218/4...0021nd5.th.jpg http://img218.imageshack.us/img218/1...0026jv0.th.jpg http://img215.imageshack.us/img215/5...0027mn1.th.jpg http://img215.imageshack.us/img215/1...0028up5.th.jpg
http://img102.imageshack.us/img102/9...0002td7.th.jpg http://img231.imageshack.us/img231/7...0003qu2.th.jpg http://img66.imageshack.us/img66/238...0004wl2.th.jpg
but i have some problems so.. i decided to modify to this :d more easy :p
http://img513.imageshack.us/img513/1...0008hs8.th.jpg http://img223.imageshack.us/img223/6...0010dx7.th.jpg http://img215.imageshack.us/img215/7...0011ju9.th.jpg http://img223.imageshack.us/img223/5...0012sw1.th.jpg http://img223.imageshack.us/img223/6...0013at4.th.jpg http://img223.imageshack.us/img223/9...0014vh7.th.jpg http://img223.imageshack.us/img223/7...0015ff0.th.jpg http://img215.imageshack.us/img215/6...0016nd9.th.jpg http://img215.imageshack.us/img215/6...0009ac6.th.jpg
http://img404.imageshack.us/img404/9...x768wi4.th.jpg http://img119.imageshack.us/img119/5...x768ln1.th.jpg http://img216.imageshack.us/img216/9...x768kg3.th.jpg
Yow...that one just sort of expanded to fill the best part of the room :p:
How are the temps?
30 to 33 idle with q66 @ 2.4Ghz with 1.25vcore in bios and 40-44 full load with 22 degrees celcius ambient....Quote:
Originally Posted by CyberDruid
Sound like it's working. My B3 runs way hot on my P5K. Compared to a G0 on the DFI its almost 10C higher. Sounds like you have it dialed in.
This thread is getting RUINED. Nice going.
Aye, 'tis be good news to hear. :up:Quote:
Originally Posted by CyberDruid
:shrug:I have no idea why I said that like a pirate. :shrug: :lol2:
Pirate day was LAST MONTH. Don't ruin the thread man :ROTF:
look this comparation :dQuote:
Originally Posted by CyberDruid
SuperPi 1.5Mod - 32M Corriendo
Quad Q6600 B3 Vs Quad Q6600 G0
http://img54.imageshack.us/img54/475...2x42ep3.th.jpg http://img399.imageshack.us/img399/5...32m1ew6.th.jpg
B3: 61-60-63-61 °C(SpeedFan is setting with 15ºC plus to give me the real temperature compre with Coretemp :d)
G0: 68-66-65-66 °C
Temp. Amb.: 21 °C aprox.
the refrigeration is the same...
http://img236.imageshack.us/img236/1...dding95um7.jpg
the parts of the rig is in my sing :p
Of course both chips B3 and G0 run with the same vcore 1.55 @ 3.9Ghz @ 4 SuperPi 32m
I think this B3 is too cold as a G0 :d what dou you think?
Way cool. Nice photography too. :up:
me too :)
bundymania, that red suits fine:clap:
Quote:
Originally Posted by ceemic
Amen! Damn that is some uber Sexy redness going on there!!!!!!!:up:
bundymania is this a re-post?? i remember seeing your rig awhile back...Still an awesome build
What's new???
what's that box next to your psu?
Thx guys ! :)
@disruptfam: yeah, i posted this rig already here, some time ago. I did some cable management and put the lights in the front and inside. the box is part of an old enermax psu, which i used to hide some of the "spaghettis" from the corsair psu :)
@bundy, why do you always have to show up suddenly with ur ubercool rig pics and envy us to death :rolleyes:
:D next time, i´ll show my new Thermaltake 89 $ Kit in my megacool pink Walmart PC Case ;)
i´m actually working on this for my new internet-pc, so stay stuned:
http://www.abload.de/img/img_3207as4.jpg
Love bundymania's work! Can't wait to see what you do with the Internet-PC.
I just finished updating my build. The original setup is in post #115 of this [H] thread.
Now, instead of two 2x120mm radiators, I have two 3x120mm radiators and one 2x120mm radiator. I have also ported both MCP655 pumps, added quick-disconnects for easy hardware swapping, and I also modified a Silverstone HDD cage so that the drives are reversed, with the cables coming out the front so that I can hide them better.
The complete work log is here.
Some pics:
http://i57.photobucket.com/albums/g2...g/IMG_2475.jpg
http://i57.photobucket.com/albums/g2...g/IMG_2466.jpg
http://i57.photobucket.com/albums/g2...g/IMG_2484.jpg
http://i57.photobucket.com/albums/g2...g/IMG_2507.jpg
http://i57.photobucket.com/albums/g2...g/IMG_2520.jpg
Very nice box you have :)
I have been slapped for saying that :fight:Quote:
Originally Posted by rbsmontemor
Super clean loop. I can see a great deal of thought went into that build. I love the Temjin case...very nice package!
Nice work getting in CPU magazine, btw. :up:Quote:
Originally Posted by DarthBeavis
nice job NicePants42
i realy love it
Nice minimalistic design :)
awesome setup i like the second last pic with uv neon on....
looks sik nice work!!!
Quote:
Originally Posted by Omastar
thank bro
tip of the hat to nice pants.
http://i57.photobucket.com/albums/g2...g/IMG_2507.jpg
wag of the finger to myself for not getting my watercooling gear yet :brick:
I did not know if anyone was interested or not, but I just finished my Lian Li PC-V2000 water cooler with TWO Thermochill 120.3 rads built inside of it. I am running two water loops with Koolance fittings, Blue Fluid XP Ultra, tygon, two Swiftech MCP655 pumps and two Swiftech Micro Reservoirs. All my water blocks are EK since they look really cool and they use copper. It runs extremely quiet with only a whisper to nothing on the fan noise. I have it about 20 percent overclocked using the Nvidia automatic adjustments in the control panel.
I could not find anyone else who had put two triple rads in a Lian Li 2000. So I went for it and it worked. I KNOW IT IS OVERKILL. I KNOW IT IS A WASTE OF MONEY. I KNOW I LIKE IT AND I AM HAPPY WITH IT. I hope you like it too!!!!
Thanks for looking.
Kevin
Nice Build Kevintrisha!! I'm saving up for a MM's case. Bu ti do love the look of Lian li cases
zipties ftw ;)
nice rig, you gave me an idea...
i have hard time fitting tripple and dualrad + 2*pump into case ~40x40x20cm
Kevin: what a great and creative job packing it all in. How is the PA120.3 mounted in the front of the case...is it secured with screws into the fan?
-alex
i have 2 triple rads in my v2000
not huge thermochill's though they take up 2 much space... my rig is in my sig if you wanna see it...
cheers
http://www.xtremesystems.org/forums/...1&d=1192431460
um... what's with the brass knuckles?
it's a paperweight.. i have some too. :D
some of us don't need brass knuckles ;) when you train breaking boards such accessories are a waste of timeQuote:
Originally Posted by kinghong1970
don't be jealous that I've been chatting online with babes all day. Besides, we both know that I'm training to be a cage fighter.
I used the radiator brackets normally used for the Lian Li 343B case to mount the thermochill into the front of my PC-V2000. All I had to do was cut a square hole in the divider and line it with the black vehicle door edge guard. It all went together with screws after that. The bottom radiator required the standard cut of three 120mm holes in the bottom of the case.
The only issue you get from this mod is a small amount of heat that blows out the front and bottom of the case. I have the rear fan blowing in for cool air. I am going to add two 80mm fans blowing in below the PSU for air flow. So far it is almost inaudible.
Kevin
I forgot.....I also replaced all of the solid drive covers with the covers that have the holes in them. It gives it an even look and allows for the front air flow. I wanted that APPLE CASE look with all the holes anyway.
Kevin
Yes the brass knuckles are paper weights. I just thought they looked neat. I did not mean for those to be in the picture.
Kevin
LOL . . .yesterday I was having lunch and happened to have a UFC shirt a friend got me from UFC 76 (I got him and his wife tickets for their honeymoon) some dork asked if I was involved with the UFC . . .I told him I am a cage fighter in training . . .dude clearly never watched Napoleaon Dynomite . . .Quote:
Originally Posted by TheSamurai
Quote:
Originally Posted by kevintrisha
I have seen worse things people leave in their workstation pictures dude.
http://img.photobucket.com/albums/v1...7;20500/03.jpg
http://img.photobucket.com/albums/v1...s%20500/07.jpg
http://img.photobucket.com/albums/v1...s2meters01.jpg
http://img.photobucket.com/albums/v1...s2meters03.jpg
http://img.photobucket.com/albums/v1...s2meters04.jpg
http://img.photobucket.com/albums/v1...s%20500/11.jpg
im guessing you used 4 light strips from ikea to light that?
hey megadethcl, what tubing is the cpu loop? tygon 2705?
It's Masterkleer 7/16" ID tubing with the marking erased by "Goof Off".Quote:
Originally Posted by Senater_Cache
NicePants42,
I love your setup and tj07! lookin' good my friend :D
Can't wait to order some new WC stuff...
Hey Mega what exactly are the devices inline after the pumps? Flowmeters? Where'd they come from?
That's a lot of LCS in a small case! Nice work. I see you also appreciate a good DVD burner :)
Read all about it in this thread.Quote:
Originally Posted by CyberDruid
And yeah, that Plextor burner kicks ass.
Heck yeah :) I love slot loaders, if I could only find one in silver :(Quote:
Originally Posted by MegadetHCl
MegadetHCl, how do you do CMOS or change memoryes?:p:
:up:
I try not to. :cool: I've used this setup for many years, so I have a pretty good grasp of what works for it and what does not, so I don't change the settings all that often anymore.Quote:
Originally Posted by ceemic
can u link some good slot loaders?Quote:
Originally Posted by AAjax
i made a little video of my sys, you may have a look :) :
http://www.youtube.com/watch?v=ofEWhTqjh5o