2x1024Mb Corsair XMS C2
http://www.klokking.com/bilder/28232M.JPG
Validaition : http://valid.x86-secret.com/show_oc?id=57058
Printable View
2x1024Mb Corsair XMS C2
http://www.klokking.com/bilder/28232M.JPG
Validaition : http://valid.x86-secret.com/show_oc?id=57058
Here's some 2x1GB Ballistix Z503 @ 285, frankly they are a hair more impressive at 280 and below. Down at those speeds trfc can stay at 14 and twr, twtr, and trtw will stay at 2-1-2 and max asynch 7 ns. I'm sure these would do more for me if I wanted to run more than 2.78V through them, but knock on wood, these have gone a month with those volts and I just don't want to give them more due to all the failures.
http://mysite.verizon.net/res6otqr/s...s/_smaller.jpg
http://img361.imageshack.us/img361/8...t2gb2wt.th.gif
Oh yeah baby 100% stable
Marios | 2x1GB Crucial Ballistix Z503 - Micron -5B D | 3-3-3-8 1T @ 251 MHz | 2.8v | Link! - SPi 32M Stable: Yes
http://users.forthnet.gr/ath/mloupos/276132.png
Finally had a chance to test out the replacement Ballistix. I set tCL, tRCD, tRAS, tRP, tRC, tRFC in bios and left the rest set at AUTO. I'm running Bios 623 on my DFI SLI-DR. I haven't finished modding my case, so I'm still running stock air cooling for now. I started the tests then left to grab some food, so not sure what the max-temps were. I'll try running 2 instances (1 per core) of SuperPI next. In the meantime, how does this look?
BRiT | 2x1GB Crucial Ballistix Z503 - Micron -5B D | 3-3-3-8 1T @ 295MHz | 2.7v | Link! - SPi 32M Stable: Yes
EDIT: Provided for image picture from a different host...
Alright, last run for the night... Bumped up the voltage in bios to 2.9V with +0.03v enabled, reads 2.94V in WinXP, just for this last benchmark run. Had to tweak some of the memory settings in windows to get SuperPI to finish. Any suggestions on how to get this to 305Mhz?
BRiT | 2x1GB Crucial Ballistix Z503 - Micron -5B D | 3-3-3-8 1T @ 304MHz | 2.93v | Link! - SPi 32M Stable: Yes
My first test of GSkill HX:
http://img331.imageshack.us/img331/6...541t7ci.th.jpg
Validation: http://valid.x86-secret.com/show_oc?id=58758
Seems like we have a new first place entry here... Not bad at all considering the system is still running on stock air-cooling. :cool:
Alright, first and only run for the afternoon... Bumped up the voltage in bios to 2.9V with +0.03v enabled, reads 2.94V in WinXP, just for this last benchmark run. All the memory options set in BIOS except for tREF which is set to auto and Read PreAmble set to Auto, but manually set within WinXP with A64 Tweaker.
BRiT | 2x1GB Crucial Ballistix Z503 - Micron -5B D | 3-3-3-8 1T @ 305MHz | 2.93v | Link! - SPi 32M Stable: Yes
Only had time to do a quick run at the higher fsb before the holiday. I wont have time to try pushing higher until after this weekend. I suspect I may still have some headroom left, considering this is the first I tweaked the tREF setting. This CPU's memory controller is amazing for an X2!
BRiT | 2x1GB Crucial Ballistix Z503 - Micron -5B D | 3-3-3-8 1T @ 307MHz | 3.05v | Link! - SPi 32M Stable: Yes
Nice work dude, i'll push my memory s'more ;) while trying to keep 3-3-3-6.Quote:
Originally Posted by BRiT
I have these ram PC4000
http://img527.imageshack.us/img527/6025/gold9ya.th.gif
They have chip Smasung UCCC.
The Mb on which I mount to them is one DFI-SLI DR.
That bios advised to me?
623-3
702-3
704-2BTA... oorr ???
Set 4:
278 - 3-3-2-7 - 1T - 2,6V @ DFI nf4 SLI-DR @ A64 3700 San Diego @ RockOn
Memrest - bild vom set 4:
http://img485.imageshack.us/img485/8...dern6xq.th.jpg
http://img485.imageshack.us/img485/1...ndra3dd.th.jpg
http://img485.imageshack.us/img485/8...od141be.th.jpg
http://img485.imageshack.us/img485/1...core4ub.th.jpg
Nice Brit. Have you tried higher volts?
Im looking to get 2x1GB set of ram and have read that the Crucial Balistic can hit 300Mhz.
Does it mate which of these i get as one set are black the other yellow.
http://www.crucial.com/uk/store/part...L2KIT12864Z503
http://www.crucial.com/uk/store/part...L2KIT12864L503
Heres my entry. Its not a scorcher but it does alright. Prime and super pi stable.
[IMG]http://img474.imageshack.us/img474/1...11valid6iz.png[/IMG]
http://valid.x86-secret.com/show_oc.php?id=60015
2*1gb G.Skill HZ - samsung uccc - work nice with Gigabyte nf4 sli
full stable (32m, 3d, s&m, prime, memtest) at 272 3-4-4-8 1T and 2.83v (most don't need over 2.60v to reach the limits, but -don't know why- extra vmem here helps a lot!), and maybe it is the cpu (winchester core, D0 stepping), or (and) the passively cooled chipset which gets really hot... that don't allow higher clocks with 1T - will check it out soon
spi 32mb : http://img246.imageshack.us/img246/1...tspi32m5mx.jpg
cpuz validation: http://valid.x86-secret.com/show_oc?id=61264
Some results from the new sticks ... you wont believe it, but the first two acutally died. :rolleyes:
One of these days im going to drop down to 10x multi and run the tests again. I suspect the CPU is stopping me @ 270*11 as its on silent air cooling.
Ballistix PC4000 @ 270 3-3-3-8 2.7vdimm
http://www.urettferdig.no/forman/ima...270-stable.JPG
Here's my 24\7 settings with 2x1gig of Ballsitix and my new x2 3800..
(copy and pasted from the dfi-street oc database..)
==========
Genie BIOS Settings:
FSB Bus Frequency - 289
LDT/FSB Frequency Ratio - 3
CPU/FSB Frequency Ratio - 9
PCI eXpress Frequency - 100Mhz
CPU VID StartUp Value - 1.50v
CPU VID Control - 1.5v
CPU VID Special Control - Auto
LDT Voltage Control - 1.2v
Chip Set Voltage Control - 1.6v
DRAM Voltage Control - 2.6v
DRAM Configuration Settings:
DRAM Frequency Set - 200 1:1
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3
RAS# to CAS# delay (Trcd) - 3 Bus Clocks
Min RAS# active time (Tras) - 8 Bus Clocks
Row precharge time (Trp) - 3 Bus Clocks
Row Cycle time (Trc) - 9 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 3 Bus Clocks
Write recovery time (Twr) - 3 Bus Clocks
Write to Read delay (Twtr) - 2 Bus Clocks
Read to Write delay (Trwt) - 3 Bus Clocks
Refresh Period (Tref) - Auto
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled
DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - Auto
DRAM Response Time - Normal
Read Preamble Time - Auto
IdleCycle Limit - 16 Cycles
Dynamic Counter - Enable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)
==========
2x Prime95 + 3dMark2001SE + 2xCPU-Z + MBM :
http://img466.imageshack.us/img466/9...titled16tx.jpg
3dMark2003 :
http://img466.imageshack.us/img466/9...titled23kr.jpg
3dMark2005 :
http://img405.imageshack.us/img405/3...titled34ap.jpg
Everest + 2x Superpi32m :
http://img466.imageshack.us/img466/1346/untitled4ky.jpg
==========
Is the database on first page still beeing updated?
I don't know either but these G.Skill Extreme Series HZ PC4000 I have, have been running 273MHz for two weeks strait at 2.7v 3,4,4,8 1T 100% load f@h.Quote:
Originally Posted by MonkSP
http://img.photobucket.com/albums/v136/wayland7/273.jpg
Not to mention game stable on everything I've thrown at them.
I've actually had them higher in benches but don't have the screenshots handy. To my recollection they did 285! But proof is the pudding. I'll get some screenies for that :)
Last edited by EnJoY : 09-21-2005 at 09:56 AM. :eek:Quote:
Originally Posted by MonkSP
Yer so in otherwords this thread is not being updated :rolleyes: :mad:Quote:
Originally Posted by gundamit