ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

Printable View

Show 100 post(s) from this thread on one page

09-11-2007, 06:43 AM
genec57

Just flashed 0503 and I don't see any difference so far nor have I experienced any problems.
09-11-2007, 08:33 AM
sesdave

Quote:

Originally Posted by ChaosMinionX

I wonder what the performance of X38 is like 400x9 with 3-3-3-6 settings. I dunno if it will handle the same as 975X did, because numbers shot through the roof using those settings.

P5K premium here tomorrow :)

I previously did the same on my deluxe - used Asus update flash as I was in a hurry with the same results under Vista X64. Still I also got the premium which is a better board - http://www.xtremesystems.org/forums/...eply&p=2424177 you should be able to get the best out of your quad on it. BIOS 0204 is latest for this board by the way. EZflash with USBstick worked fine.
09-11-2007, 09:48 AM
ChaosMinionX

@sesdave

Did asus give you the premium in place? Or did you take a 200$ hit?
09-11-2007, 10:12 AM
ROK

Just received my P5K Deluxe back from Asus service. My RMA was exactly 2 weeks from when I shipped it (FedEx). Same serial number returned. I too lost my board in a bios mishap, (was flashing from 202 to 501). Asus gave me a RMA number, and in the email was a link to check status of the repair. No problem, other than I was itching to use my new board. And board was returned with the 202 bios. Had to flash the 501 to use my Q6600. Was a little nervous aftere what happened the first time...
09-11-2007, 01:17 PM
sesdave

Quote:

Originally Posted by ChaosMinionX

@sesdave

Did asus give you the premium in place? Or did you take a 200$ hit?

I RMA'd to my UK retailer SCAN who gave me a full refund - very nice of them as I thought I was going to be out of pocket. I pointed out that I was not the only one who have had flash failure on the deluxe MB. Its not asus flash - I have used Asus update many times on the P5W DH with no problems but after the failure on a MB with a soldered chip I will always flash from dos or use ezflash with a USB stick from now on.
09-11-2007, 02:52 PM
crossg

Quote:

Originally Posted by timber715

how is it so far??? whats new with the 503 bios?

I checked through all the bios options and it looks exactly the same as version 501. Runs fine but I haven't had the time to test it out. Work keeps getting in the way.:)
09-11-2007, 03:03 PM
MonkY

I have found nothing new for 0503 bios. Except maybe the Robson option missing in bios. My E6850 temps are still erratic, bad detected. In bios it shows even 17-20 degrees Celsius (when i have 30 degrees as room temperature). Even disabling all the options in CPU settings from bios, and i still get strange values (like CPU temp beeing much higher then core temps). Strange, i wonder what's Asus thinking. I paid premium price (260 bucks) for something that even an Asrock bought with 50 bucks can do. Just stoopid...
09-11-2007, 04:16 PM
ChaosMinionX

Intel Robson only shows up when drives are configured AHCI or RAID I believe.
09-11-2007, 11:04 PM
timber715

oh well, as they say... if it aint broke... will stick with 404 bios for now... i'm at 3212Mhz(357 x 9) orthos stable (8hrs++) at 1.288V idle. with max temp of 59C. will just move along while waiting for my ballistics to arrive... Cheers
09-11-2007, 11:23 PM
jcniest5

I wonder if the newest board have a new revision or still 1.00G?
09-12-2007, 03:58 AM
sesdave

ChaosMinionX - the Latest BIOS for Premium is Beta 0302 - you can get it from rapidshare. This thread page has a post with a link.

http://www.xtremesystems.org/forums/...151965&page=10
09-12-2007, 07:51 AM
Supershanks

Am usaing raid & can confirm that Intel Robson is gone.
09-12-2007, 08:30 AM
ChaosMinionX

Quote:

Originally Posted by sesdave

ChaosMinionX - the Latest BIOS for Premium is Beta 0302 - you can get it from rapidshare. This thread page has a post with a link.

http://www.xtremesystems.org/forums/...151965&page=10

Thank you :)
09-12-2007, 08:35 AM
mrcape

I'm still on 311 and it's been rocking along no problem since may at 3.6ghz. What could I gain by going to 503? I'm not using raid or a quad.
09-12-2007, 10:27 AM
ChaosMinionX

I believe 311 timings in NB are pretty loose... latter BIOS's have tighter timings in NB IIRC so you would have to re tweak your RAM settings probably.
09-12-2007, 11:13 AM
Pete

Flashed from shipped 0123 BIOS shipped with it to 503 and no problems.

Only problems with setting RAID0 up on XP X86. Keeps asking for matrix stroage driver after it's formatted the drives
09-12-2007, 11:40 AM
ChaosMinionX

You need the Iastor.sys and PNP drivers and whatnot for Raid to work properly on intel controllers... did you F6?
09-12-2007, 01:54 PM
Pete

I did it all. In the end i made my own XP disc with them in Via nLite.

There is no need for a floopy drive these days, they have got to stop making the need

Now my problem is sound, it keeps asking for a Windows bus. Anyone?
09-12-2007, 02:20 PM
Counter CS

Quote:

Originally Posted by Pete

I did it all. In the end i made my own XP disc with them in Via nLite.

There is no need for a floopy drive these days, they have got to stop making the need

Now my problem is sound, it keeps asking for a Windows bus. Anyone?

I think you need to instal Chipset Drivers from CD, after that Donwload new Intel Chipset Drivers end instal them.

I had the same problem and solved like that. Cumps.

INF_AllOS_8.4.0.1016_PV_Intel
09-12-2007, 03:04 PM
KMEI

How can I enable this LargeSystemCache feature if it helps (even with my processor?)?

Also, do you know of any additional XP tweaks to make the thing faster :)
09-12-2007, 05:01 PM
ChaosMinionX

Quote:

Originally Posted by KMEI

How can I enable this LargeSystemCache feature if it helps (even with my processor?)?

Also, do you know of any additional XP tweaks to make the thing faster :)

you could do the L2 cache tweak, performance is negligible at best in your perception of it, but I like to do it so I know ;)

HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management

SecondLevelDataCache is what your looking for. Then you will need to enter a hex number for it.

Conroe's with 4MB of L2 = Hex 1000 = 4096KB

Kentsfield's with 8MB of L2 = Hex 2000 = 8192KB

You may also edit the DWORD, and change it to decimal instead of HEX and enter the actual amount of L2 present, instead of using 1000 or 2000 to set.

If you have any doubt in how much L2 is present, please consult CPU-Z or ask on here for assistance so you dont break something :)

This applies to XP and Vista.
09-12-2007, 05:08 PM
KMEI

Thanks! I'll write that one down in case I format or so. Is this the so called LargeSystemCache-change?
09-12-2007, 05:25 PM
sam95ta

Quote:

Originally Posted by Pete

I did it all. In the end i made my own XP disc with them in Via nLite.

There is no need for a floopy drive these days, they have got to stop making the need

Now my problem is sound, it keeps asking for a Windows bus. Anyone?

Right click Yellow question mark in device manager,click update driver.
09-12-2007, 05:30 PM
ChaosMinionX

Quote:

Originally Posted by KMEI

Thanks! I'll write that one down in case I format or so. Is this the so called LargeSystemCache-change?

Basically, if you google it I believe its under "L2 Cache tweak in windows" or something to that extent.
09-12-2007, 09:30 PM
Pete

Quote:

Originally Posted by Counter CS

I think you need to instal Chipset Drivers from CD, after that Donwload new Intel Chipset Drivers end instal them.

I had the same problem and solved like that. Cumps.

INF_AllOS_8.4.0.1016_PV_Intel

Quote:

Originally Posted by sam95ta

Right click Yellow question mark in device manager,click update driver.

Chipset drivers are on off the cd that comes with it.

I am not online with this system, and i wont be.

Asus has really gone down hill.

I can't find anything online to make it work

Show 100 post(s) from this thread on one page