update:
Opty 146 CACJE 0607 APBW @ 2900, 1.54v
http://img132.imageshack.us/img132/8...able8gz.th.jpg
Printable View
update:
Opty 146 CACJE 0607 APBW @ 2900, 1.54v
http://img132.imageshack.us/img132/8...able8gz.th.jpg
Ok some primetesting and this is the result...2900 crashed after 53 mins... 2850Quote:
Originally Posted by daysleeper
ok result, not amazing but its fine i think... :rolleyes:
OPTERON 144 CACJE 0604BPAW 320HTT*9@1.39V under watercooling
http://img250.imageshack.us/img250/3...awvcore8jm.jpg
http://img325.imageshack.us/img325/6...pawtemp5ry.jpg
Opteron 144 CAB1E 0614EPCW 3100Mhz@1.425V under aircooling
Pics to prove that?Quote:
Originally Posted by Killer89
Here is pic at 3200mhz with 1.55V:toast:Quote:
Originally Posted by celemine1Gig
http://img210.imageshack.us/img210/4157/32004ki.th.jpg
Temperature was so low because my room window was opened:D Cooling is Freexer 64
That's a pretty nice chip Killer. I got a 148 a couple days ago. Trying it out last night, 32m Pi @ 3300mhz and a 1m @ 3496. 1.63v. Will do more tonight.
http://img.photobucket.com/albums/v1...2532m33301.jpg
http://img.photobucket.com/albums/v1...25/5251m23.jpg
looks similar to mine that oneQuote:
Originally Posted by coop
you should be able to do 32M in mid to high 34xxMHz
Those CAB1Es are fine. Mine will run 3.1GHz on stock voltage and TCCD ram. However I am currently using BH5 and I have bumped the Vcore a little to address the memory controller issue and have gotten to 3.2GHz. I would like to go higher but I would hate to fry this proc.
Opteron 165 CCBBE 0610DPMW, 3.0GHz on air. Bootable en stable in windows. Not 100% Prime stable (just few hours), need more vcore for that and therefore water.
My Opt 144 CAB1E 0604CPMW is runing SP2004 v24.14 now @ 3006MHz 1.37V AIR cooled :)
...waiting for Conroe :D
your blend test is not valid. only 1 test passed in 20minutesQuote:
Originally Posted by Killer89
you must use less ram because prime used your swap. that's the reason you have only 37° "load" with your freezer 64 pro :p:
whatever, week 0614 is the best week i've ever seen for opties :)
i'll receive Ã:banana: CAB1E 0614 DPCW soon and it"ll do 3GHz on stock volts aircooled
I've done four 32m pi's with this chip. The one above, a 20.37..a 20.36.. and this one, a 20m35s :[IMG]http://img218.imageshack.us/img218/9374/vvf2zo.th.jpg[/IMG] .
Also did a validate for the heck of it..3663. http://valid.x86-secret.com/show_oc.php?id=98026
May try more tonight as I believe it can. So far it has done everything all the way through. The validate could also go higher I think as I did not really want it to blink out. It is a 0543FPMW. I have to run with SysTool on to monitor temps.
Yep, B1 chips are just as impressive in single core as they are in dual core chips :eek: Where did you guys get your 0614s? I have a CAB2E 0602 coming, should be nice :woot:
cpuz validater...3.7Ghz http://valid.x86-secret.com/show_oc.php?id=98257
And a PB 32m SuperPi for me..20m32sec :D http://img228.imageshack.us/img228/8052/fff4ht.th.jpg
3006MHz @ 1.37V SP2004 v24.14 stable for +16h
Opt 144 CAB1E 0604CPMW and TT BigTyphoon :)
any idea what can i tweak in my bios to stabilise my 305x10 overclocks ?
other than vcore that is.
and also whats the max vcore i can go while not killing the chip?
Opteron 146 CABYE 0540FPAW @ 3.00ghz Swiftech Apex Ultra Cooled 1.58v
http://img233.imageshack.us/img233/5...zvx250s6jy.jpg
I recieved a 0530 CABNE today, here are my stable results.
http://valid.x86-secret.com/show_oc?id=98573
I'm rather happy with it.
A 32m Spi with my 148@3588 http://www.xtremesystems.org/forums/...&postcount=174
Opteron148 CABYE 0543 FPMW @ 3.15GHz Water Cooled 1.53V. Prime not stable since 3.0GHz...
http://www.vmodtech.com/files/3150-pi32m.jpg
what stepping is that?Quote:
Originally Posted by coop
Nice oc, i'm planning to chuck mine(same stepping) under phase fairly soon. Does your chip run hot on air, as mine has always been a hot one?Quote:
Originally Posted by Kain XS
hi all.
here is my new opty 144 just received today.
tested under freezer 64 pro with 23-24°C ambiant temp, ihs on
stepping CAB1E 0614DPCW
very nice chip here
http://membres.lycos.fr/starostise/C...prime95min.JPG
some new test with this opty.
awefull coldbug at 390 HTT for +40°C :eek:
so it's only good with air/water and stability.
max spi 1M:
http://membres.lycos.fr/starostise/C..._spi_1mmin.PNG
max screen always aircooled:
http://membres.lycos.fr/starostise/C...39-air-37C.PNG
Oh wow all these 144's killing me. I got a 146 because I had read they overclocked well.
I'm @ 2.9GHz with 1.5v not prime stable. Had it running for 7 hours then it quit.
Could be a memory issue, but my ram is memtest stable.
I changed my TRP from 2 to 3 and that made things more stable so my prime run of 7 mins changed to 7 hours. Now I'm running a cas 2.5 to 3 and I will see how long it ran once I get home tonight. I'm at school studying on my laptop. :(
I want to hit 3GHz~!!!! I have a CAB2E 0546 UPMW on a DFI Lanparty UT NF4 Ultra-D.
Hopefully I can get things stable at 2.9GHz, then I will try for 3GHz. Any others think my baby can to 3GHz?
My temps are a bit off. I was using the stock heatsink/fan, not the heatpipe one, but the crappy one, so I went out and got an XP-90C since I already had a 92mm panaflo medium at home. Now my temps with 1.5vcore gives me about 52degrees celcius full load.
I think I should try reseating the heatsink.
I've read that just adding a dab of thermal paste in the middle does it for these AMD64 processors, but does it really?
How do you guys do it?
I think my temps are too high.
Comments? :)
I just got an Opteron 146 CAB1E 0614DPCW to do 3GHz@1.425v on air :) Prime stable too!
now primestable 3000Mhz 1,55V from bios and i'm quite happy :banana:Quote:
Originally Posted by daysleeper
http://membres.lycos.fr/starostise/C...prime95min.JPG
i'll receive one or two other opty 144 soon: cab1e 0614 bpmw :D
Quote:
Originally Posted by JRich
I hate you forever...:(
You mean we can't be friends? :(Quote:
Originally Posted by Shampoo
That CAB1E will be a killer. I hear it is cold bugged but on air I run 3.15GHz at 1.425Vcore (CPU-z says 1.39). Best $130 I ever spent on a proc.Quote:
Originally Posted by starostise
Opteron 146 CACJE 603FPMW @ 3 Ghz prime stable :)
http://i72.imagethrust.com/t/106786/untitled.jpg
errr.... well here's mine CAB1E 0614BPMW, rig spec as in sig.
http://img.photobucket.com/albums/v5...stockvcore.jpg
CAB1E 0614 BPMW air cooled (25-26°C ambiant temp)
http://membres.lycos.fr/starostise/C...prime95min.JPG
@ amok: what is your cooling to have 25°C laod
EDIT:
http://membres.lycos.fr/starostise/C...prime95min.JPG
I just got my chip from a fellow forum member and was noticing something funny.
2700mhz - 300x9 - ram @ 1T 5:6 divider-246mhz 8-4-4-3 - passes pi, fails prime in mins.
2700 - 300x9 - ram @ 2T 1:1 - 300mhz - 8-4-4-3 been priming the past hour or so.
WOW, 1t is certainly crazy on the ram that it wouldnt be stable at 246 1T but 300 2T is more stable (so far)
CAB2E 0540FPMW
Also guys, i might get a DFI LANPARTY UT NF4-D from a trade and wondering if this is the same board (performance wise) to a Ultra D? I want to give my opty what it needs and 333mhz =) I cant do that with my Asus or Abit board. Im sure this chip will do it, but the person i got it from had it on a Ultra D. Would this be a good choice? I want something that is known to do over 330fsb...and i see everyone in this thread that has a opty runs on ultra d's.
Well, 300mhz for ram crashed about 2 hours into it.
Im hoping ..dam shame =( going to get the DFI board in a few weeks, guess ill just settle till then.
Hmm, where are you fellas getting these fantastic cab1e opty 144's ?
I'm kinda interested .
:)
I have a CAB2E 0540FPMW, got it from a fellow [H] member.
So far its cranking away at 305x9, more to come when i get my DFI (hopefully)
Why isn't my siggy showing up?
My opty 165 hasn't been able to get past 283x9 stock voltages...not bad though!
starostise@ my ambient is at 18C (air conditioned room)
ohh, i cant wait till my DFI gets here....im hoping will let me hit 2.9 =) Since my boards HTT seems to crap out at around 307.
What stepping is the Opty144? You may be at the CPU limit. You may also want to try a different divider. The 5:6 isn't so friendly to me. SOmething to do with the mem controller perhaps?Quote:
Originally Posted by HighLife
Quote:
Originally Posted by sofarfrome
my opty is CAB2E 0540FPMW. This chip was at 3ghz on a Ultra-D, which is what it was ran at before me. I know its able to hit at least 2.8.
All reviews i read about this asus board, put its max FSB at 305-306.
Even if i dropped my multi to 5x and go to 307, i start getting HD errors.
Im going to get a NF4-D and mod it to ultra. Also going to try some BH5 in on my asus and see what i can get out of it. So far 2670, ram at 251 7-3-3-3 2T is the highest i can do on my rig in my sig....going to swap Asus for a DFI and test some BH5. See what i can come up with.
My opteron 144 @ watercooling 3300 mhz prime stable @ 1,525v set in bios :lol: but i hit brick wall @ 3350 and its not mobo... anyways what are top 3 highest freg, hitted with amd opteron 144, wr is 9x402 but 2 /3 ?
Lol, I have a teribly 144 :p I can't run 2700Mhz 1M with less than 1,75V
For a 1M run must i give him 1.75V :slapass:
But i have however a 3GHz SS :)
His stepping is : CAB2E 0548FPMW ( sounds not bad )
I hope this cpu burn out and get a better stepping :stick:
So far im at 2774..1mhz higher and i fail superpi half way through 32m run.
<a href="http://img291.imageshack.us/my.php?image=2774mk6.jpg" target="_blank"><img src="http://img291.imageshack.us/img291/711/2774mk6.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
coldbug :stick:Quote:
Originally Posted by sponge bob
with iced water i didnt have coldbugm, and i managed to run superpii 1m @ 3500 mhz :fact:Quote:
Originally Posted by starostise
just wanna ask bro, does that batch have a coldbug? because i am considering to buy an opteron 144 for my vapor change cooling, tq before ^^Quote:
Originally Posted by sofarfrome
90% opterons have coldbug :slapass:Quote:
Originally Posted by andy_satriani
can you show me? :DQuote:
Originally Posted by sponge bob
is your opty a CAB1E?
mine can't pass 390 htt aircooled so i'll never run over 3500MHz
Does anyone uses Epox 9NPA+SLI mobo with their Opty? If so can you tell how far have you got your opty stable .
334x9-1.375v+113% in bios. Idle/Load temps 30C/47C
http://weboperative.com/gallery/Misc...113percent.PNG
CPU-Z link
http://valid.x86-secret.com/show_oc.php?id=107567
I love this chip.. will keep pushing it until it i hit 1.575v
need to strip it naked for better overclocking/temps
WOW a lot has changed since I got my chip(last fall cab2e), people hitting 3.0ghz with stock volts!
OMG!!!Quote:
Originally Posted by sponge bob
This is really a good CPU :eek:
Congrats:toast:
damn i wish my dually could do that :D,.. umm maybe with a TEC Block. who knows.
Cacje0604gpaw
Should I sell my Opty 146, which does 2.9-3.0 on air and get a X2 3800/4200+ ? I do a lot of encoding and need faster encoding machine.
Or should i switch to E6XXX series ;)
heres my 3ghz stable opty 165, if the pic doesn't work then go here: pic of the overclock is at the bottom of forum. And the foot in the picture is my polish friend, he took the pic. http://www.xtremesystems.org/forums/...d.php?t=105728
http://www.uploadfile.info/uploads/d78aa3ac67.rtf
upped it a little more on my opty :D
Prime95 + 3dMark2001SE + CPU-Z:
http://weboperative.com/gallery/qdig...t_settings.PNG
Nice! What temp? Mine bugged out at 330 with too low temps as wel, i bet it wil do 340~350 with less cold. Give it a go.
Not sure exactly, as i killed a lot of things for speed. Probably about -15 load i would guess. I wonder if i try raising the fsb using clockgen and priming at the same time would help getting past the 330 mark?
Have you tried ricky tweak? The acpi multidriver wil get idle temp up and load wil be about the same as idle temp using that driver. It helped me getting from 330 to 353 which is enough :D Rightclick the acpi uniprocessor (device manager, computer) thats in use now, properties, update driver, choose driver yourself option and pick acpi multi.
If you are using XP and you want to switch back to uni you have to use the "use previous driver option". In win 2000 you can do the same as above but choose the uni driver again (again NOT in XP! the uni wont show up).
I prefer this over priming/raising HTT.
This is me max with uni driver:
http://img.photobucket.com/albums/v292/Viss1/Temp.jpg
and this with multidriver:
http://img.photobucket.com/albums/v6...0483511MBM.jpg
Wow, that's a big jump! I have to admit i'd completely forgotten about the coldbug kicking in at higher fsb. Will give this a go when i have a spare evening. Btw, does the tweak kick in straight after posting has finished, or does it only start once fully into windows?
After posting while windows starts afaik. I booted with 330 and raised in windows using cg.
Sweet, cheers for your help. If you see me post more results then you'll know it worked.
Just got my Opty 165 yesterday, it's CCB1E 0609FPMW.
Should go well with my G.Skill DDR600 TCCD Kit and Ultra-D Mobo. Any suggestions?
-Satan
I got a 165 too the other day and its in my Ultra-D but Im having stability problems in Windows. It seems like it just likes to freeze for no reason. Is there any sort of driver I have to install or anything?
follow these directions..Quote:
Originally Posted by filmbot
http://www.xtremesystems.org/forums/...ad.php?t=81429
good luck.
Thanks for the link. I did, and now Im running just fine. I think it was just the fact my Windows disk doesnt havent SP2 on it. Time to slipstream.
Hi everyone, I'm new here but been reading here for awhile. Finally got a opty 165 ccbbe 0617 fpmw. Just wondering if anyone been able to take this baby to 3ghz on air? I'm on a Big Typhoon w/ a 110cfm Silverstone fan. I primed it 11hours last nite at 1.44@2.924ghz. Haven't been able to get 3ghz prime stable and if you have what are you mobo volts if on a expert board. Nice oc likewhoa!
just recently upgraded from G.skill 4800FF to this beauty. My latest OCing result
http://s7.photobucket.com/albums/y27...gAnch=imgAnch1
I hit 3Ghz with 1.57v and i'm sure you can on air also, but watch your pwmic temps, and keep cpu at <50CQuote:
Originally Posted by Peter949
good luck.
My new very promising CPU ..
On simple water but soon will be naked and getting stable at 3200+MHz…
But just look the low vcore needs there.
http://www.thelab.gr/attachment.php?s=&postid=429660
Here can boot fine into windows, but not stable for heavy benches... :D
http://www.thelab.gr/attachment.php?s=&postid=429765
Holy mackeral!
I have been away for a few and I can't believe how much AMD Opterons have improved in stepping and performance overhead! 3200Mhz is simply outstanding!
I remember people posting that AMD cores didn't have anything left beyond 3Ghz a few months back when the duo's made there introductions. Now look.... 3200mhz :slobber: That must be stepping into core 2 territory no?
Anyways, nice to see these numbers! - I might invest in just one more chip if the stepping proves consistent :)
LoL 3200 was yesterday....:D
Today new score reached..
3300 Screen of Death
http://www.thelab.gr/attachment.php?s=&postid=430873
3280 CPU-Z Validation :woot:
http://valid.x86-secret.com/show_oc?id=115478
And new will Come because i have problems with my watercooling and need to change block.
Also in a few days this CPU will Be NAKED ...:toast:
Vcore is still very low comparing to the others so this give me hope to reach 3200MHZ stable and 3300 perhaps Benchable.
Image what this CPU can do on SubZero system.(if its free of Cold BUG);)
Now regarding Stepping ... is CCBBE 0617FPMW and serial - wafer is χχχχχχ0053
CACJE 0607 APBW (Terrible Stepping!)
http://img183.imageshack.us/img183/874/opty2750qa7.jpg
hey ive had a 148 for awhile, and ive been having probems getting it to clock well, as it sits in my sig( 264X11 1.475 volts) im really stable. if i drop to a 10 or 9x multy i can hit 290fsb on this mobo( i think thats all it has to give, tops out at 300, it was cheap)
currently i am hitting a mear 40*c at prime load for a hours, BUT if i bump my FSB up even 2 mhz, i cant prime for more the 5mintues....
im content with this chip doing 2.9 stable and under 1.5volts, but id really love to see something over 3 (i know im maxed by 290X11 cause of mobo) but id be happy with 272X11,and im cool wiht upping the volts as well, just not sure if itll help much.
ive got my HTT withen stable settings for this board and my ram is aslo stable up to 240 mhz, runing a 166 div to keep me under....
can anyone give me some pointers? feel free to PM me help as to not clutter this thread of holy optys :P much thanks for anyhelp!
i love seeing what these 165 etc.. can do under water and phase, those are jsut plain out killer clooks!!!
-levi
p.s. ill add a pic some time later
here is my lastest overclock
http://www.weboperative.com/gallery/...se-2x-cpuz.PNG
Looking nice! Was thinking of taking my ihs off also but decided against it.
are you on water or anything else besides air cooling? if yes then do it :) otherwise wait.Quote:
Originally Posted by Peter949
nice RAM speed :)Quote:
Originally Posted by Clay
is it 3d stable?
Yeah It'll do everything except prime. Can't seem to figure that out though. mems are good with those timings to 307fsb 1-1. Oh well no worries eh.
My 146's htt is at 333, multi at 9. Could I in theory hit 3.3 ghz? My mems not that good, 2gb ocz 3200. Any tips on tweaking that?
Topless Opteron 148 0543FPMW @ 264*11 w/ 1:1 g.skill hz @ 3-4-4-8.
Bios is set to 1.525 core, 2.75 vddr, everything else is stock.
Full Load cpu temp = 42'C (core @ 53'C) with air cooling ^_^
http://img241.imageshack.us/img241/4...eronbi6.th.jpg
I'm pretty sure my an8 ultra reports voltages slightly higher than they really are. This is 24/7 speed btw - I there's a brick wall at roughly ~2950 where more voltage just doesn't help.
I have exactly the same problem, I can't push fsb mhz higher than ~267 without failing prime within minutes. I'd really like to see something over ~3ghz but I don't think it's going to happen with reasonable aircooling volts. I think with a nice WC setup you could boost core volts up to ~1.65 and see some action with these chips.Quote:
Originally Posted by saber63
It seems like we're limited by die heat right now, the CPU sensor on my board never hits anything higher than ~42/43'C but with cpu volts >1.55 I hit coretemp > tmaxcase on the CPU pretty quickly and then start to fail prime (ie: it's great for ~2-3 minutes until my cooling can't keep up). BTW, what stepping is your 148?
yeah im running at 263*11 its prime stable for days :P
and im only at 1.5 bios, which reads 1.47ish in speadfan, so im getting aroun 37-40*c while priming.
my stepings are in my sig :P but if you cant see them..... cab2e 0546bpmw
*shrug* im thinking of getting water onto this bad boy, as im getting a lanparty board soon *woot* on i pulled the IHS off one day cause i was really board :P i saw a 5* drop while priming, of course this was when i had a :banana::banana::banana::banana:tttyyyyy heat sink, at 250*11 with 1.45 volts itd hit 45*c!!!
im also going to be getting a athlon 3700+ so ill be able to compare the chips, should be fun!
im really happy to know im not the only one with this wall! thanks for the info!
-levi
My new toy. This is on stock air, untweaked currently:
http://img.photobucket.com/albums/v2...z0r/150spi.jpg
Hopefully going watercooling soon.
Edit: I love this chip. Still stock air:
http://img.photobucket.com/albums/v2...r/3suicide.jpg
Now that's truly a thing of beauty :clap:Quote:
Originally Posted by Carlz0r
Good stuff, Carlz0r
My new opteron 144 cpu code CAB1E 0614 EPCW and "t" chip
installed and out ofbox 2837 tested 5min then i did oc it 9x333 and start priming 4 hours now.. :) vcore 1.4+104% and DFI Ultra-D
enjoy :D :fact:
http://img218.imageshack.us/img218/9...oppyekajz2.gif
KeZzu thats a nice cpu you got there. Is it aircooled? got some more potentsial to OC it?
yes it is cooled by zalman 9500 and now little update 3060mhz and over 1hour sp2004 stable :) and still priming, and im sametime typing this post !
:fact: and mobo is DFI Ultra-D and 1.45vcore + 104 %
http://img221.imageshack.us/img221/3...yprime3sl0.gif
Does 2x512MB ram sticks and 2x1GB ram sticks have somewhat the same stressing effect on the memory controller? Or does 2x1GB runs alot heavier?
In what way will this affect an overclock ?
As for myself, I have 4x512MB and this is just :mad: , got 2x512MB out of my system and it runs alot better, overclocks better for the cpu and the ram. Though this is nothing new, my question is, is it smart to sell this 4 sticks and get myself 2x1GB sticks ?
update on air!
http://img84.imageshack.us/img84/8099/oppyenkka2tf6.gif
update 2 on air
http://koti.phnet.fi/kezzzu/OC/enkka4.GIF
I played with my Opteron 146 CABYE 0540 FPMW
on air with a Noctua NH-12 and a DFI
Room temp : 18-20°C
1.39v
Benchable@3060MHz with DC = 47°C
http://img119.imageshack.us/img119/9726/3121wv1.jpg
approximately 1.6v
Benchable@3240MHz with DC = 60°C
http://valid.x86-secret.com/show_oc?id=129786
http://valid.x86-secret.com/cache/129786.png