Got a CACJE 0605BPBW today, went straight under my XP-90 and a Delta 92mm @ 2800rpm.
http://img239.imageshack.us/img239/4...20041xi.th.jpg
Just a shade under 2.9GHz at stock volts.
Will keep playing with it...I'll be back when I reach 3G :cool:
Printable View
Got a CACJE 0605BPBW today, went straight under my XP-90 and a Delta 92mm @ 2800rpm.
http://img239.imageshack.us/img239/4...20041xi.th.jpg
Just a shade under 2.9GHz at stock volts.
Will keep playing with it...I'll be back when I reach 3G :cool:
How about this: Opteron 144, CAB1E 0604.
Stange stepping?
I've seen Cab1e on an FX something or other once and some dual core opty's, but never on a 144.Quote:
Originally Posted by Electroid
It should be pretty good.
Dayum! :eek: All these CACJE steppings doing extremely well. I've got an Opty 148 comming with 0601 CACJE stepping. Hoping she'll give me the 3Ghz with ease on water :cool:
Best of luck to you :up:Quote:
Originally Posted by Nebulous
Here's my 3G shot:
http://img155.imageshack.us/img155/9...z32m1sf.th.jpg
Prime stable at ~2990.
i have it, 1,5v 3 ghz prime with airQuote:
Originally Posted by Electroid
and max i managed to bull out was 3269 mhz with AIR cooling and SuperPi of 25,406 :banana:
Hey guys need your opinion. I getting bored with my oc and I'm going for 3ghz but I am only getting stability after 1.68v in bios and 1.64 smartgaurdian my temps are 45c load and 55c for the pwm. Am I safe???? Sort of? Not at all? Let me know what you think.
45 @ load is safe, pwm temp could be a bit lower. I d say ur safe
Not meant to cramp your overclock, but it's so clear that you cheated on SP2004 (prime lite) since you claim (and it shows in the time elapsed) that it's been running 24h, when the scrolling bar is so very large. Looks more like 1h at most. Just making an observation.Quote:
Originally Posted by @_dud
I always thought that pwm was good up to like 70-80c. Even though most peoples are much lower. That is really the only temp that worries me. I'd like to put more voltage, but not sure how the cpu will react I've never reallly figured it out I guess because some people say that you can keep uping the volts as long as the temps are good, but then some say otherwise. What do you think?
http://sponge.ez.pri.ee/data/media/3/25.407.JPG Aircooled with estonian cold air ~5*c + zalman9500+
Get a fan blowing over the RAM/ PWM area, 55C is pretty hot although with dualcores 60C is a common occurence.
PWM is regulating Vcore, having this IC blistering hot will most likely influence Vcore stability.
I feel unconformtable with PWM ic temps over 40C but i'm a bit paranoid i guess. :D
edit: Uh Sponge Bob posting in between huh? lol, nice result man but at 3269 i get 25.078 , can i have some Estonian air please? ;)
After like lots and lots of days of burning in and testing i was finally able to get my 3ghz oc stable. I realized that the major limiting factor was heat, if it got over 54C it would fail prime and sp soon after. Hits a pic of 3ghz 3 hour stable on sp2004.
http://http://img206.imageshack.us/i...ble155v8hp.jpg
I have no idea how u guys can oc ur opty's so high, its ridiculous. Is it the cooling? Good steppings? I had to work hard just to get to 3ghz. :confused:
2x512mb Gskill GH BH-5, i am using 2x256 corsair pc3200 memory :P and 1gb vs 512 is about 0,3-0,4 in superpi :fact: My UTT (teamgroup 2x512)acts crap, 3,4 v 250 mhz and 3,5-3,6v no go :OQuote:
Originally Posted by Zeus
Get rid of the heatspreader, this chunk of metal is holding you back big time, second is cooling, overclocking is all about voltage and cooling. ;)Quote:
Originally Posted by smartasien
Yeah, Bank Interleave gives a nice boost.Quote:
Originally Posted by sponge bob
Did you mess around with Data/drive strength on your Team group RAM?
These two settings seem to be related to Vddr.
BH-5 that doesn't even like 3,5V is a bit hard to imagine.
Right now, wondering whether i should remove IHS for cooler temps, isn't it supposed to make a huge difference? How risky is this btw? i don't wanna like cut off a transistor...
Use the "search" function, there are a few threads about this subject.
If you take your time it isn't that hard at all.
what do u advise for data/drive strenght ?Quote:
Originally Posted by Zeus
That's hard to tell, every memcontroller-RAM combo reacts different.
Mine for one seems to like 7/1 best with BH-5.
Start of with auto and tweak from there.
Opteron 146 CAB2E 0604 DPAW retail box just shipped from the egg.
Was able to run Prime Torture Test all the way up to 2.96 at 1.4v.
To get it Prime stable at 3.0 I had to raise vcore to 1.45. But I don't think
it's the cpu giving out yet, Just topping out this ASUS A8N Sli Deluxe.
Guess I need a to consider a better motherboard at this point.
Is the DFI LANPARTY UT nF4 Ultra-D still the best bang for the buck if you don't need SLI?
Opteron 144 CAB2E 0602GPMW
DFI Ultra-D
2GB OCZ UCCC
http://img.photobucket.com/albums/v6...3150SP2004.jpg
OMFG thats sickest opteron 144 aircooled result so far i think
Wow, is that watercooled?
51C is blistering hot but 3150MHz prime stable for 13 hours is very nice! :up:
Opteron 146 CABYE 0540FPBW - Liquid Chiller CPU@+3°C
http://img223.imageshack.us/img223/8708/cpu35112rp.png
http://valid.x86-secret.com/show_oc?id=89153
Quote:
Originally Posted by @_dud
The Prime ran 24hours?something wierd on the screnie:D
What was the room temp? CPU at 51c and PWMIC at 32c on a Ultra-D usually means environmentally controlled room. ;)
Hello, I have bought a new opteron 148 with stepping CAB2E 0604CPMW
What can you say about this opteron?
Thanks :)
Opteron 146 CABYE 0540FPBW :D
http://img286.imageshack.us/img286/8...u1m35040fp.jpg
http://img258.imageshack.us/img258/2667/cpu36320aa.jpg
1,9v omfg :D
This shot is from another forum with a 0604cpmw.Quote:
Originally Posted by squaresoft
i see some of u guys clocked to 2.9 on ur opterons and getting sub 30 sec superpis, for some reason at 2.9 im only pulling off 31-32 seconds
Just received an Opty 146 from Monarch - CACJE 0606MPMW. Anyone tried OC'ing this stepping? If so, please post your Hz and Volts. Thanks
There are X2 LBDHE0606APMW known.
Under Dice up to3,6Gig under water around 3Gig.
Dude, with 2,9GHz u should easely get sub30. Get some decent dual channel RAM clocks and u will get it.Quote:
Originally Posted by xerogenesis
Here's an update - currently "toasting" at 2.95GHz with 1.6v on air. :) I'm tempted to see what it'll do naked on water...Quote:
Originally Posted by RekLess
It ran 4hrs Prime at 2.8G/1.42v.
CACJE 0607 EPAW
http://img140.imageshack.us/img140/7753/275cp.jpg
http://valid.x86-secret.com/show_oc.php?id=89626
2.8ghz stable with 1.35V for 24/7 :banana:
eraser, where did you get your chip? It looks like this year's week 6 and 7 chips are pretty strong.
Opty 144
CAB1E 0605 GPBW
3010mhz@Vstock
Aircooling Xp90
http://popol55.no-ip.com/~popol/hfr/...010@vstock.jpg
Max screen aircool :
http://popol55.no-ip.com/~popol/hfr/...3453@1.648.jpg
http://valid.x86-secret.com/show_oc?id=86710
temp room 17°c
processeur : 38°c
-------------------------------------------------------------------------------------
Opty 144
CAB1E 0604 CPBW
2900mhz@stock
3030mhz@1.504v
Aircooling Xp90
temp room 25°c
http://popol55.no-ip.com/~popol/hfr/...900@vstock.jpg
http://popol55.no-ip.com/~popol/hfr/...3031@1.504.jpg
-------------------------------------------------------------------------------------
Opty 144
CAB2E 0610 GPAW
2874mhz@stock
2970mhz@1.536v
Aircooling Xp90
temp room 25°c
http://popol55.no-ip.com/~popol/hfr/...2874@stock.jpg
http://img241.imageshack.us/img241/2...97015368vo.jpg
:toast:
From france :clap:
Omg this makes me want to try 144 even more :O
I presume IHS was still on ?
No IHS mod :DQuote:
Originally Posted by neoman
Got this 148 yesterday, still testing it out...
http://img137.imageshack.us/img137/7...ime29006vy.jpg
It's a CACJE 0544 EPAW... Does 3050Mhz stable @ 1.45 but my temps are wayyyy high... Is it usual ? I have about 40º idle and 54º full with 1.45v, cooling is a XP90c + Tornado 92mm... My Venice wouldn't do more than 39º @ 1.6v with the same cooling... Already remounted it 3 times to check good contact and thermal grease, all's fine...
I can change it for a 148 CABYE 0536 GPMW what do you think ?
It's the same for me with my xp90.
> 1.5v my temps are very high, 40° idle and 55° in full
Opteron releases more heat than the venice :(
Try maybe an IHS mod :confused:
Amazing stuff man, nice one :toast:Quote:
Originally Posted by popol55
My first Opty was a 144 CABYE 0536GPMW, I think most people who had one will tell you not to bother :p:Quote:
Originally Posted by God_Lx
8x coeff, for fun, max htt maybe
http://popol55.no-ip.com/~popol/hfr/144/cpu-3414.jpg
First Post Here:
AMD Opteron 144 CAB1E 0604 CPBW
3GHz @ 1.44v :banana:
http://img146.imageshack.us/img146/1...mins7pp.th.jpg
MD Opteron 144 CACJE 0604 APMW
Is it good and are there anyone who have test one?
I don't have that stepping, but it sounds like a really good one from the info that you've given. ;) I've seen some APMW CPUs do really good and CACJE seems to clock good when aircooled.Quote:
Originally Posted by Smy
I have a problem, my opteron cab2e 0546gpaw, have high temp than X2 4400
whate cooling
X2 4400@2500 temp idle 31º
Opteron 146@2800 temp idle 34º
i look the temp whit ite smart guardian of DFI
I'm sorry if I don't see your point, but who cares about idle temperatures?Quote:
Originally Posted by white_zombie
Show us the difference in load temps, then we can talk about a real difference. BTW, no CPU is like the other, thus temperature values can differ quite a lot from one to the other.
in load its 7º high opteron than x2 4400
Go IHS mod :D
hi, i have an Opteron 144, he makes 2900mhz@1,45v but when i go higher to 3000mhz he needs 1,61v -.- and all over 3ghz is unstable, i have an dfi lanparty ultra-d, cpu without IHS and bh-5 rams. Can some one give me tips? or better timings?
http://img84.imageshack.us/img84/2963/xspost2kw.jpg
Have you lowered your multi and tested your ram for max clocks? Might be the ram that's causing instablity. Try tref 3684, drive strengths at 7/1 and maybe play with mal and rp settings. Also, I'm completely stable at 3.0ghz, but even with more voltage can't get past 3.05ghz. You might just be at the cpu's limit. Good luck. :)
HAHAHAHAHAHA....try 33 minutes ;) Look at his start time, then the time on his clock, then the time/date of his post :clap: :clap: :clap:Quote:
Originally Posted by thunderstruck!
http://img62.imageshack.us/img62/762...me30ghz7hg.png
My little Opteron 146 seems to get better and better over time.
50% overclock on stock voltage is pretty nice in my book:
http://img.photobucket.com/albums/v6...3GHzstockV.jpg
Load temp is only 30-31C
Just on plain water and 20C room temp.
Does Prime up to 3170MHz and SuperPi 32 at 3230MHz (see sig) but won't run 1M over 3260MHz -- have to work on that. ;)
http://img356.imageshack.us/img356/7098/31265df.th.jpg
Always on air with xp90
Zeus not bad ;)
Nice chip there littleDevil.
heya, does anyone know if the early cabne 0530 apmw's were known to be cold bugged? in general? what about for a single stage to -20º?
Hey dude
Should work fine on -20c core :)
They do DICE too i think, should get to -35c or so with pretty high HTT. Not very coldbugged compared to latter Opterons
this step does not coldbug a lot:
nearly at 360htt for -20°C I think
thanks guys, any body else?
OPB's currently got this cpu. He'll be testing it on his cascade tomorrow and if it's fine at those temps, you'll be seeing it on my -120C autocascade. Also, OPB should be receiving #0001 any day now ;) Time for some single core Opties to give us some more mind boggling numbers :wth: If anyone's interested in purchasing this cpu, drop me a PM, but I warn you....it's not gonna be cheap. On SINGLE STAGE:
http://www.ocxtreme.org/onepagebook/...op154tpmw2.jpg
http://www.ocxtreme.org/onepagebook/...p154s34g8m.jpg
http://www.ocxtreme.org/onepagebook/...4sbh535g1m.jpg
http://www.ocxtreme.org/onepagebook/...sbh535g16m.jpg
hahah nice steven. again folks, someone is asking me about cold bug info, this time on the other chip i have for sale, opb will recognise it.... CABYE 0543
-
http://mail.kilter.com/ftpclients/ma.../CABYE_ihs.jpg
and the one from before
-
http://mail.kilter.com/ftpclients/ma.../CABNE_ihs.jpg
yep, i really want someone to buy these chips and put them under sub-ambient. i wanna see em SHINE!
dude. OMGzzzzzzzz :eek: thats pretty good in ANYONE's book. can i ask how you have trained it so well that it can do these things? get better over time? do you TSST it? DOMINATE? like the dog whisperer did to cartman? if there was something you have been doing over the course of the chips life, please let me know! i'd love to train mine into submission!Quote:
Originally Posted by Zeus
Quote:
Originally Posted by el rolio
Ghehe, i'm gonna learn it to fetch and sit up straight for me. :D
Seriously, i burned it in with Prime95 for a couple of days when i first got it and a few weeks ago i decided to chop 'n pop it's top.
Beside that, the daily abuse (3GHz at 1.4V) seems to be enough to make this chip what it is now.
From now on it will run 3GHz at stock voltage 24/7.
I hope the max benchable frequency will go up in time as well. :)
Btw, going back some 180 (!!) or so pages back you can see how it performed when i first got it, it did Superpi 1M at 3GHz stock voltage and that was pretty much all.
Still not bad but it improved a hell of a lot over time.
aww man! i wass hopin for some super voodoo style where you remove 10mv every month or so and prime for a day and then you eventually get back to stock volts.
soooooooooo dissapointed! :P
thanks fo the reply. we'll see what my chip does for me. its at home priming and curing the AS5 at stock volts, 290x10
Sorry mate, can't make it any more beautifull than it is. ;)
I've had a friend tell me about the CABYE 0543's. He tells me that they bug @ ~-40Core IIRC. The ONE CABYE Opty I tried barely booted @ -50C Windows temp @ 1.60V :rolleyes: I actually had to turn my autocascade OFF with the cpu running in order to get "hot" enough so I could boot. The chip was able to run OK (300HTT) @ ~-30C core temps while my unit was off :p:Quote:
Originally Posted by el rolio
I recently had to swap out the RAM in my 144 folding box, & start from scratch to get back to the 2.6Ghz it was at (I think @ 1.45v). Managed to get 2.9Ghz this time @ 1.52v, but using a divider since I have dirt cheap 2x256Mb sticks in there now (they could probably handle more than 214mhz but I haven't had time to eek any more out of 'em). Its been folding 24/7 since and hasn't budged @ 40c :D Some great OC's in this thread.
my 0543 starts to show issues @ 10c. it actually clocks better on air than water. took 1.75 @ 4c for 3350mhz, primed for 2 hours. and then my board tossed it's cookies. I just got a 8L res for my chiller, so I'll be trying again soon.Quote:
Originally Posted by s7e9h3n
This is a 148 CABYE 0543 ive had. Stock Mach II and around -20 idle in MBM.Quote:
Originally Posted by el rolio
http://img.photobucket.com/albums/v6...oc/148test.jpg
thanks man, awesome clockage. like i said to my window shoppers... throw 1.6v at these chips and let me see em FLY!
This is the only screen i have for you unfortunately. This was max 1M with this vcore. It did a little less then me 146 and sold it. IIRC coop put one under dry ice and had great 32M results, screens included.
Still stable with summer temps (about 25-26°C roomtemp), thats good, but even no go with just 3050MHz.. error after 1min. The only good thing on this cpu is, that i can bench it with 3150-3200MHz.. :stick:
http://213.202.211.105/gravedigga/05...temperatur.jpg
I really want to get back this 3700+ - http://213.202.211.105/gravedigga/05...263mhz_BH5.jpg :)
Got the same cpu 148 CABYE 0543FPMW with 013x serial number going on phase hopefully sometime after May 15th when my phase change unit arrives http://i4memory.com/showthread.php?p=40919#post40919 :)Quote:
Originally Posted by el rolio
http://www.fileshosts.com/DFI/NF4_SL..._23m22s_tn.jpg
:)
@ El Rolio like my Baby CABNE0530APMW
1288864G50072
http://img409.imageshack.us/img409/9...me24145.th.jpg
Geez Rufus, that one is even sicker than my CABNE0530APMW that does 3GHz at 1.36V, that's watercooled i assume?
uh, YES! FRIKKEN RIDICULOUS>?!?!?!?Quote:
Originally Posted by Rufus7
ok ive saved up this icon for some time now
:toast: TOAST to you sir. 1.32v @ 3GHz goddamn!
Zeus of course watercooled!
You can see my System in the Signature.
Lics MasterfreezerII CPU Cooler
Laing DDC Pro Waterpump. Soon a Duallaing Waterpump from Watercool!
Tygon R3603 11,2mm/8mm Pipelines. Soon 15,9mm/11,1mm Pipelines.
2x Black Ice Extreme II Dual Radiators. Soon with an Stealth Gen Two Triple Radiator.
And an CC25 Waterreservoir CC25.
And 1/4" Fittings .
4x Silenx Xtrema Pro 63cfm 120mm Vents on the Black Ice Radiators.
http://img216.imageshack.us/img216/5...ing18hh.th.jpg
http://img289.imageshack.us/img289/2...ing25hz.th.jpg
Here some results from Switzerland !
http://www.bilder-hosting.de/img/BU1DX.jpg
http://www.bilder-hosting.de/img/BUORZ.jpg
SPLMANN
a Member of overclocking team switzerland
Well this isnt too extreme like some onf you guys but I'm still new to overclocking. It's a 146. The stepping is CAB2E 0602 GPKW, the actual voltage was 1.625. It's weird it does 3ghz 32M stable at 1.475v but willn't go past 3.15 with 1.6v. I think it might be my motherboard(evga nforce 4sli) but im not sure.
http://i21.photobucket.com/albums/b2...Primstable.jpg
Welcome!!! where are you from guy..?Quote:
Originally Posted by splmann
@Lane-K
ich bin aus Staad am Bodensee in der nähe Rorschach!
Und wer bist du ?
Gruss
Roger
Mit freundlichen Grüßen... LOL
English please ;)
Otherwise others won't understand :eek:
@Garrett
Sorry i was talking with my friend SwissGerman.
Regards
Roger
Awesome combo you got there Splmann. I think I got to swith my MB ;)
Very nice results there! If that clock in your sig is right, you must have a very good 144 :)Quote:
Originally Posted by popol55
I have much of the same hw as you.. 144 and 2x512 A-Data DDR600 ram. You have this ram also, right? I cannot run them at 2,5-3-3 even at 200 MHz on AMD platform tho :( Only 2-2-2 works! Do you have any tips?
Thanks :)
Is CAB1E 0604 CPMW a very good stepping for an opteron 144?
dunno, test and you' ll find out and report back :)
Just doing a little messin around tonight and thought I'd post this. Highest I've got it to. CACJE 0602 GPMW. This 144 is the best chip I've had. Pretty damn good results for the $$ :D but just looks bad compared to all the conroe results :lol:
sorry for the :banana: :banana: :banana: :banana: pop-ups
http://img461.imageshack.us/img461/3...431m1uf.th.jpg
http://img114.imageshack.us/img114/1...932m4jv.th.jpg
I know that most if not all of you use the DFi, so thought you might be interested in a different brand
MSI 7100 SLi NForce4 with the latest BIOS 1.9/3.9
An Opteron 170 week 0550 VPMW running fully stable since January folding currently at 2810MHz at 1.38v. CPU 40°C under load, system temp at 26°C.
2x512MB OCZ Platinum PC4800 at 2.5-4-4-10-1T (default settings) at 2.85 v.
The rig is folding 24/7
Had it at 2924MHz January to April but with 1.41v and higher CPU temp, backed it off since last month to preserve it through the summer temps!
My old Venice 3000+ ran at 2812MHz in this rig until January...brilliant little chip!
K6dude
Miine is just that and now its 2700Mhz 1,55V im pretty disappointed because everyone else hits 3Ghz... :( ...but more testing.... http://murobbs.muropaketti.com/threa...310&msRange=70 some finnish testing...Quote:
Originally Posted by eizei
Opty 146 2900 @ 1.5v
http://img164.imageshack.us/img164/7230/29005mg.th.jpg
I am giving this the SP2004 test right now. It already passed at 3.0GHz for 11 hours.
http://img119.imageshack.us/my.php?image=10013507os.jpg
SPECS:
144 Opty CAB1E 0614BPMW
G.Skill PC3200-FX TCCD
DFI LP NF4 Ultra-D
XFX GForce 7600GT XXX
Antec P160
Antec TPll 550W PSU
Thermalright XP-90 w/Panaflo fan
Very nice.. wish I could do that.. :mad: *jealous*Quote:
Originally Posted by sofarfrome
Do you have a pic of A64Tweaker and/or some tips? :)
Here is pic of the latest SP2004 test on going with A64 Tweaker.
As far as tips go I can't really give any right now as I have yet to get to a point where I need to tweak things. The best advice would be to go to the ebay person where I bought this one (new: $131 shipped) and see if she has another like this. Last I knew she had 28 left but she won't tell you the stepping. I lucked out on this one being a CAB1E 0614BPMW which seems to OC like mad. Go to ebay and type in opteron 144 and look for a seller named betha???. I think there are only 3 listings so she should be easy to find. She also has 165s and 146s if not more.
http://img135.imageshack.us/my.php?i...ghztccd7mv.jpg
need some help here guys
i am running at 2.9ghz at 1.564vcore but it isnt occt stable for more than a few minutes. it was stable at 2.8ghz with 1.560vcore and prime stable for 9hrs(cpu stress only)
i've seen others running 2.8ghz or more on stock vcore or >2.9ghz below 1.56vcore/
why is this so??
plus
how to increase memory allocated for superPI?
i noticed despite oc-ing, the superPi times do not change much and i attribute this to the memory allocated which remains stuck at 8388648, despite having 1679122432 as real available memory.