Opteron 165 CCBBE 0610DPMW

Quote:

---

Originally Posted by s7e9h3n

Anybody here have access to COLD temps? I want to know if this cpu is gonna be bugged. If somebody's willing to loan me one, I'll be happy to run it through some testing on my autocascade :D And by low temps, I mean something like this:

---

I think it is coldbugged even under water :eek:

It primed all night at 3GHz 1.47v, stop prime and a minute later freeze. So I reboot at 334 HTT, which was fine yesterday, no boot.. back to 333, freeze in windows after a few seconds, so I reboot, start prime as quick as I can, and it's been going 10 minutes. WTF?

Ambient is pretty cool in here, probably 20C so the chip was probably 25C at idle when it froze. If I get another CCBBE 0610 on monday, I might lend you one for a week, but I'd need it back ASAP :cool: One needs to go to pay the credit card

edit: keep in mind it could have been my mobo's 338htt limit kicking in early.. I did manage a boot at 334 and I'm priming there now. Just bought a new ultra-d on newegg, hoping it ships from nj and comes tomorrow! Now the trick is to get it in without re-doing the water setup :stick:

I'll have a CCBBE here wednesday if that's what Monarch gives me. OEM 165 from Monarch.

I'll test at -70c for a cold bug and let you all know.

-Jordan

Quote:

---

Originally Posted by Repoman

I think it is coldbugged even under water :eek:

It primed all night at 3GHz 1.47v, stop prime and a minute later freeze. So I reboot at 334 HTT, which was fine yesterday, no boot.. back to 333, freeze in windows after a few seconds, so I reboot, start prime as quick as I can, and it's been going 10 minutes. WTF?

Ambient is pretty cool in here, probably 20C so the chip was probably 25C at idle when it froze. If I get another CCBBE 0610 on monday, I might lend you one for a week, but I'd need it back ASAP :cool: One needs to go to pay the credit card

edit: keep in mind it could have been my mobo's 338htt limit kicking in early.. I did manage a boot at 334 and I'm priming there now. Just bought a new ultra-d on newegg, hoping it ships from nj and comes tomorrow! Now the trick is to get it in without re-doing the water setup :stick:

---

Very interesting.

You say 334 HTT and 25c on the processor bugged? That is identical to my data
http://www.xtremesystems.org/forums/...ad.php?t=96016

My CCB1E 165 coldbugged at 333 HTT @ +25c core temps in windows. Locked up at that HTT. Chip does 344 HTT prime-stable on watercooling with 40+c core temps.

I called this - CPUs have a tough time clocking to 3 Ghz on air UNLESS they are coldbugged. The bugged ones are better for air/water.
BTW IF it turns out they are not bugged - they will be the next chip to get! lol... kinda doubt it tho.

Quote:

---

Originally Posted by Absolute_0

Very interesting.

You say 334 HTT and 25c on the processor bugged? That is identical to my data
http://www.xtremesystems.org/forums/...ad.php?t=96016

My CCB1E 165 coldbugged at 333 HTT @ +25c core temps in windows. Locked up at that HTT. Chip does 344 HTT prime-stable on watercooling with 40+c core temps.

I called this - CPUs have a tough time clocking to 3 Ghz on air UNLESS they are coldbugged. The bugged ones are better for air/water.
BTW IF it turns out they are not bugged - they will be the next chip to get! lol... kinda doubt it tho.

---

Thats intresting, as I am having a hell of a time getting Core 1 stable on air at 3ghz.

Quote:

---

Originally Posted by Absolute_0

Very interesting.

You say 334 HTT and 25c on the processor bugged? That is identical to my data
http://www.xtremesystems.org/forums/...ad.php?t=96016

My CCB1E 165 coldbugged at 333 HTT @ +25c core temps in windows. Locked up at that HTT. Chip does 344 HTT prime-stable on watercooling with 40+c core temps.

I called this - CPUs have a tough time clocking to 3 Ghz on air UNLESS they are coldbugged. The bugged ones are better for air/water.
BTW IF it turns out they are not bugged - they will be the next chip to get! lol... kinda doubt it tho.

---

Wow :eek: That's weird!

PS Stealth- just got my other 165 in from monarch- CCB1E 0608MPMW. Bad for phase :( I will lend you my CCBBE 0610DPMW if you want, the 0608 seems to be better.

I just got a CCBBE 0610DPMW delivered today from Monarch. I'm gonna get ready to install it here in a minute. Hopefully it will be a lot better then the 0551 i bought retail from ZZF.

I think it will be! It'd be nice to get some more results from these, so we could see the average.. so far only me and spazilton have posted anything :stick:

Quote:

---

Originally Posted by Spazilton

Core 0 failed @2800 stock volts in 15 seconds
Failed at 2750 stock volts in 12 Minutes.

I'm only using an XP-90, so better cooling might produce better results.

I have a TTBT to use and a sythe ninja. I think its about time for this chip to go over to my SLI-DR Expert.

---

I've got a Zalman CNPS9500 on mine. I'm wanting to see just how high this chip will go so i been bumping it up pretty quickly. I was primeing at over 2700MHz on stock volts but one of the cores errored out when i pushed it to 2800MHz. I set the voltage on my DFI Expert to 1.35v manually without using AUTO or the Special VID so i dont know if that makes a difference or not. I'm running about 1.4V now with Special VID and its primeing away at 2808MHz no problem. I'm hopeing it will hold for a couple of hours and then i'll try for 2900MHz.

http://www.swva.net/jehamilt/2952.jpg

Quote:

---

Originally Posted by burningrave101

I've got a Zalman CNPS9500 on mine. I'm wanting to see just how high this chip will go so i been bumping it up pretty quickly. I was primeing at over 2700MHz on stock volts but one of the cores errored out when i pushed it to 2800MHz. I set the voltage on my DFI Expert to 1.35v manually without using AUTO or the Special VID so i dont know if that makes a difference or not. I'm running about 1.4V now with Special VID and its primeing away at 2808MHz no problem. I'm hopeing it will hold for a couple of hours and then i'll try for 2900MHz.

---

What are your temps with that set-up?

I'm upgrading my brother's 3000 Winchester to a dual core, decided to get the 165 from monarch for him so it will be here on Wednesday, he doesnt' care about overclocking but I'll see what it does on my rig first, wonder what stepping it's gonna be :D :D

opty 165, CCBBE 0610DPMW. 3.1g@1.424v@stock HSF, not stable.

Edit: Sorry, guys, I messed up the 1114bios and decided give a try on 0329bios. But now, I can not boot into windows @3.1g anymore. So, no 3.1g SS.

Quote:

---

Originally Posted by harbin

opty 165, CCBBE 0610DPMW. 3.1g@1.424v@stock HSF, not stable.

---

suicide shot on first boot i take it? :eek:

Let the poor thing run for a day, you oc it to hell!

Quote:

---

Originally Posted by harbin

opty 165, CCBBE 0610DPMW. 3.1g@1.424v@stock HSF, not stable.

---

ss please ;)

jus got mine as well, priming now at 2.7 at 1.31v. Passed 5hrs no problem

once I push up to 2.75, core0 errors

1.34v - 2.75 stable , 2.8 core0 error
1.37 - 2.8 core0 error

maby ill let it burn in some more before I go for 2.8 again

Quote:

---

Originally Posted by Aldy402

jus got mine as well, priming now at 2.7 at 1.31v. Passed 5hrs no problem

once I push up to 2.75, core0 errors

1.34v - 2.75 stable , 2.8 core0 error
1.37 - 2.8 core0 error

maby ill let it burn in some more before I go for 2.8 again

---

Wow thats odd on water. I only needed 1.375 to get 2800 stable. Core 1 is the weak core on mine.

Said screw it, tried priming again at 1.55.

2950 @ 1.500 seems to be the sweetspot. 1.55 only allows me to go to 2980. Not worth the extra temps and volts to get the 30mhz. I bumped it back down to 2900 @ 1.475 for some burning in for a coulpe of days and see if that helps.

Core 1 will go 3 minutes now at 334x9 3006Mhz.

Quote:

---

Originally Posted by Spazilton

Wow thats odd on water. I only needed 1.375 to get 2800 stable. Core 1 is the weak core on mine.

Said screw it, tried priming again at 1.55.

2950 @ 1.500 seems to be the sweetspot. 1.55 only allows me to go to 2980. Not worth the extra temps and volts to get the 30mhz. I bumped it back down to 2900 @ 1.475 for some burning in for a coulpe of days and see if that helps.

Core 1 will go 3 minutes now at 334x9 3006Mhz.

---

my 0608mpmw did 2.8 stable at just 1.34, but I killed it while trying to take off the IHS. I hit myself everyday for that.

it seems like the 0610 do great on stock voltage and most of them average 2.7 but it scales horribly.

Quote:

---

Originally Posted by Aldy402

my 0608mpmw did 2.8 stable at just 1.34, but I killed it while trying to take off the IHS. I hit myself everyday for that.

it seems like the 0610 do great on stock voltage and most of them average 2.7 but it scales horribly.

---

qft.

They do NOT scale well on volts.

Crappy part is on mine, Core 0 is stable at 3.05 @ 1.425. Core 1 will not do over 2970 at anything up to 1.55v

delete me, sorry for that guys

No problem.

I just received the 165 from Monarch today, it's a CCBBE 0610 DPMW as well, gonna test drive it on my rig and see what's up :D :D

Quote:

---

Originally Posted by Spazilton

qft.

They do NOT scale well on volts.

Crappy part is on mine, Core 0 is stable at 3.05 @ 1.425. Core 1 will not do over 2970 at anything up to 1.55v

---

Strange how within steppings, there seems to be a certain core thats bad. 90% of dual cores have bad core 0's, and both of us happen to have bad core 1's

Quote:

---

Originally Posted by ben805

I just received the 165 from Monarch today, it's a CCBBE 0610 DPMW as well, gonna test drive it on my rig and see what's up :D :D

---

Lucky duck, I got a CCBWE 0607UDMW :rolleyes:

Quote:

---

Originally Posted by CompGeek

Lucky duck, I got a CCBWE 0607UDMW :rolleyes:

---

I got a CCBWE 0607UPBW. Does about 2.4ghz with stock vcore. I will put it under the phase though and I expect much better. These chips should scale with volts and cold. Not that good for air/water though :(