oh man these OCZ sticks are evil :eek:
http://img130.imageshack.us/img130/6687/dsc025834kc.jpg
Drive/Data Strength = Auto
oh and i have to use 10xmulti with these sticks hence MAL/RP very loose....these ones throw 11xmulti back the bastards heh
http://img113.imageshack.us/img113/633/untitled0pv1.jpg
OK PEOPLE PREPARE FOR A JAW DROPPER :)
here is a video for non believers ;) Click here to watch a video of dinos22-32M-SuperPI-run
http://img480.imageshack.us/img480/5...12023m4789.jpg
i hope i get 11x multi on my 146 coming in from monarch ;)
good, bad and good news
Good news >>>> my Opti 146 didn't die
Bad news >>>> looks like i killed my Ultra-D.......sometimes works and then locks up
Good news again :D >>>>> Opti 146 sitting in my Expert board with 11x multi :woot: :woot: :woot: :banana: :banana: :banana: :banana:
http://valid.x86-secret.com/show_oc?id=80066
hahaha, great luck dinos22. Glad it's back again.
btw here it is at 3GHz....needs a little more volts :D
http://valid.x86-secret.com/show_oc?id=80069
what a strange motherboard this Ultra-D....it kinda died and is back again
basically after long cmos clear i just went straight to windows cause i know as soon as i enter bios and go out it will crap out...........let's see started off OK
http://img93.imageshack.us/img93/6706/untitled8be1.jpg
I have the same problem, perhaps a long cmos clear is in order. It's either that or condensation... I have to take apart my system and do a lil more insulating.Quote:
Originally Posted by dinos22
Hurry up CFX3200 :p:
i haven't used it under phase yet heheheh
yeah it definately woke up as i just did a lot of messing around and it's fine :banana:
looks like i'm sending it back to c-buzz for R404+kyle's evap :D
yeap Ultra-D is definately back from the dead
here is also some proof that temp controller on this CPU works properly as well
i have IHS on now and using that crappy stock aluminium cooler
LOAD TEMPS = 58C :shock: @ 2.75GHz 1.52Vcore 3.3Vdimm 250MHz 2-2-2-5 1T
http://img76.imageshack.us/img76/6935/untitled3nb.jpg
PHASE RESULTS ARE UP!!!!!!!!!! >>>>>>> PHASE UNIT MADE BY C-BuZz :D
i just went straight for 3.3GHz
i couldn't use 10.5xmulti to get 13/ratio for RAM hence i only have 235MHz on RAM :(..................run was done with MBM5 so i can see the temps
3300MHz 32M SuperPI
windows idle core temp = -28C
windows idle evap temp = -40C
windows SPI 32M core load temp = -16/-18C
windows SPI 32M evap load temp = -36/-38C
http://img85.imageshack.us/img85/559...m07688s5sr.jpg
3355MHz 8M SuperPI....heheh too late for 32M runs
windows idle core temp = -26/-28C
windows idle evap temp = -39C
windows SPI 32M core load temp = -16/-18C
windows SPI 32M evap load temp = -36/-37C
http://img478.imageshack.us/img478/4...m34516s4ji.jpg
3405MHz 8M SuperPI
windows idle core temp = -26/-27C
windows idle evap temp = -38C
windows SPI 32M core load temp = -15C
windows SPI 32M evap load temp = -36C
http://img478.imageshack.us/img478/7...m29984s8vc.jpg
3455MHz 8M SuperPI
windows idle core temp = -26/-27C
windows idle evap temp = -38C
windows SPI 32M core load temp = -15C
windows SPI 32M evap load temp = -35C
http://img478.imageshack.us/img478/7...m25281s8pf.jpg
_____________________________
3.5Ghz
http://valid.x86-secret.com/show_oc?id=80427
i did a few passes of 32M......just need to figure it out....but it looks benchable close to 3.5GHz :leet:
http://img478.imageshack.us/img478/4...i24266s5dj.jpg
almost 20minutes argh
http://img102.imageshack.us/img102/9...m04485s8pn.jpg
Nice to finally see phase on that baby. :) May I ask who c-buzz is, and how much his units are? Also, you should try another processor to see if your multiplier trick works with them too, or if it only works on that specific 146.
hey mateQuote:
Originally Posted by tsuehpsyde
c-buzz is a fellow aussie......i don't think he sells his units..........well not yet anyways........i really needed to thank him because he built a really nice single compressor unit for me and it kicks arse.....better than I expected :D
here is a photo of 3.5GHz 32M SuperPI run........... -12C load.....i need it just a little colder to make it stick :slapass: :) ....
http://img461.imageshack.us/img461/1310/dsc026353zk.jpg
AMD needs too stop giving beer to their employees..
:lol: they should have drunk more....would be been really nice had i gotten 12 or 13xmulti out of it heh
oh here is my latest effort with the CPU
new SuperPI 1M, 8M and 32M scores :D
1M @3505MHz ........this time i didn't use real time or anything :)
http://img159.imageshack.us/img159/7...i23953s8xg.jpg
8M @3487MHz ........TREF=2506 and DDS/DS=6/Auto
http://img91.imageshack.us/img91/745...m22828s9hj.jpg
32M @3476MHz .......TREF=2506 and DDS/DS=6/Auto.......I made it into 20m times :D :D :D
http://img159.imageshack.us/img159/6...m58485s2ev.jpg
also did some testing with TCCD sticks and nailed this beauty of a time
my PB for sub-24m 32M at 2960MHz :eek: :leet:
http://img113.imageshack.us/img113/8...tertimings.jpg
if ur ram takes 290+ why don't you utilize that?
just going though my old thread and noticed the commentQuote:
Originally Posted by i found nemo
i couldn't get them going under cold for some reason
also BH5 was consistently FASTER even sub 250MHz 2-2-2-5 than TCCD 2.5-3-3-6