Sucks to hear :( I chipped 2 corners and smashed 3 SMDs on my 146. With heavy wide di/ln2 unit's you need to be REALLY careful and mount with some support to keep it balanced, especially on those tiny dothans.
Printable View
Sucks to hear :( I chipped 2 corners and smashed 3 SMDs on my 146. With heavy wide di/ln2 unit's you need to be REALLY careful and mount with some support to keep it balanced, especially on those tiny dothans.
not for long doc ;)Quote:
Originally Posted by micdoc
actually hipro5 has an old P4 ES IHS which fits the dothan perfectly.Quote:
Originally Posted by skirms_fr
Some UPDATES.....
The QUEEN ATI IS BACK for it's throne as for the 3DMark 2k1........:D
http://www.thelab.gr/images/Hipro5/D...2311_1_png.png
http://www.thelab.gr/images/Hipro5/D...2311_2_png.png
ONLY problem now is the ORB.......Doesn't recognize the X1900XTX card so I have to wait until the project could be published......
Cold bug has hited me once again with this VGA......NO GO under cascade so the score is with a single phase change system and -20*C......:(
2k5
http://www.thelab.gr/images/Hipro5/D...5572_1_png.png
http://www.thelab.gr/images/Hipro5/D...5572_2_png.png
That's for now.....:)
:eek:Quote:
Originally Posted by hipro5
congrats on the new wr :toast:
:woot: :woot:
:slobber:
Congratz Hipro!
Dothan under LN2?
For Gpu phase is a great result;)
Outstanding hip,:toast: :clap:
Insane scores, very nice 2k1 :toast:
Mayb with a good gpu container and ln2 you can achieve a higher score.. Hopefully :D
Well congrats on this! :banana:
VERY impressive clocks there hipro !
We're getting ready for a run tonight with X1800XT, but that will be very hard to beat.
finally :D but I still have "the nature" score :(, cmon!!!
Don't count on that!......;)Quote:
Originally Posted by zbogorgon
Thanks guys.....50 Lt of LN2 has evaporated for the X800XT-PE and this one......:D
Wish you luck and without any cold bug........TRHEE cold bugs have hitted me already.....:(Quote:
Originally Posted by Micutzu
Nice results man. I expected X1900XTX memory to go higher than that though, it is the same 1.1ns stuff as 7800GTX512MB is it not? Anyway, I shouldn't be complaining with results like that!
i'm sorry for coldbugs, i know it sux, i had some luck, 1800xt and 1900xtx without up to -60.
Quote:
Originally Posted by C Stat B
actually hipro5 set another WR, the one burning a x1900xtx before its release date! :D, this card had no cold bug, clocked veeeeery well both GPU/MEMS.
we'll have 2 more x1900xtx's to test really soon + more LN2 + Dothans full power ;)
insane score :woot:
:D Yeap WR.......Burning an X1900XTX pre-released in 55 minutes.....which had NO gold bug at all....:(Quote:
Originally Posted by esdee
Two videos about the full load run by esdee.......:D
Video 1.....
Video 2......
that was the 607FPS on nature ?
Shhhh......be patient......;) :DQuote:
Originally Posted by zbogorgon
rofl :bananal:Quote:
Originally Posted by hipro5
Now thats funny... When sky was here, we putted a IHS on my 780ES. Put it on my Adapter aaand! No go... My first thought was, yeah, i rock, i killed my 780ES while putting a heat spreader on it!Quote:
Originally Posted by hipro5
After i removed the IHS (yes, i just removed it, nothing more), it worked again. Maybe sky tod the story about his 780ES, also very mystical...
Quote:
Originally Posted by hipro5
hey you just upped my hopes. my 780es went the no-booting route a long
time ago. so maybe i can get it to live. from the looks of it, if it is damaged,
it is a very very very tiny bit of one corner.
oh and on a sidenote. a friend (see post above :) ) had this funny thing
happen to his 780es - he put a p4 ihs on it and with the heatspreader on
the chip it wouldn't boot at all - we thought we had killed 2 of those chips
in a matter of hours. turned out that it would boot just fine without the
ihs - WTF? ;)
(edit he beat me to post this... ^^)
i guess i will cut an old credit card to use as a spacer around the core and
hope to get it working like that.. crap crap crap ;). i finished mine off before
i could test it on any of my p4gd1's, doh. it died using the ct-479 cooler,
kinda silly really, had it to ~2900 wanted to test it on my other adaptor and
it wouldn't boot anymore. to my eyes it doesn't really look damaged in any
way, one corner looks faintly, very faintly actually suspicious, but that's it.
all the parts would fire up, but i wouldn't get a post.
i was about ready to put it under phase - if it's dead already, i'm gonna kill
it for good grrr ;)
see no evilQuote:
Originally Posted by zbogorgon
hear no evil
speak no evil
:fact:
wow that's a nice wr - congratz :toast: