-
my personal 300-305mhz settings are:
CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3210
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = 7
DRAM Data Drive Strength = 3
Max Async Latency = 8ns
Read Preamble Time = 6ns
Dram time = Normal
Idle Cycle Limit = 16
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)
@ 3.05V vdim and 1.55V vcore on my 148 opty @ 300x10
HTH
targ
-
Gigi77: How does Trp @3 reacts on your memory?
-
got ddr600 with somehow tight alphas at 3.0v
i've had a lot of work on college and little time i'll try more soon, room temp was "high" i'll try more volts and lower room temps
http://img48.imageshack.us/img48/236...ddr600b6of.jpg
