Opteron 170 CBBWE 0550UPMW

Printable View

Show 100 post(s) from this thread on one page

01-19-2006, 01:50 AM
mongoled

Quote:

Originally Posted by Pete@X

www.trend4pc.de

Cheers Pete@X, are you happy with the service? Someone here at XS says they open the boxes, pre-test, then put them back in the boxes. This would mean tht those not-pretested would be poor performers
01-19-2006, 02:32 AM
Matt Hirst

Some great results make me wonder if I ought to pop the lid of my 170???

regards,

Matt
01-19-2006, 03:20 AM
mongoled

Quote:

Originally Posted by mongoled

Thank you for tht information, email has just been sent in English and Danish, hehehee. I hope they send to Europe

:)

Is the price on there website including taxes, from wht i gathered the one price is with tax the other is without

Well they only send to Denmark, the search goes on......
01-19-2006, 03:23 AM
Pete@X

Quote:

Originally Posted by mongoled

Cheers Pete@X, are you happy with the service? Someone here at XS says they open the boxes, pre-test, then put them back in the boxes. This would mean tht those not-pretested would be poor performers

Hiya ...

yapp ... happy with them and no Probs whatsoever. Don`t believe these rumours you´hear/see floating around. You can be sure that an E-Tailer can not do that without risking the business - and have you seen proof of that ? I guess not ... :toast:

Anyway ... my 170 is primeing @10x305 right now (at least I hope that ... just started the run before i left for work :D ) ...

cya
01-19-2006, 10:41 AM
jackea

Great result pete@X, that may be highest clocking Dual Opty on the Orb!
I have got the same stepping but on the 165 model, it is almost topped out
at 2800MHz, IHS popped and it takes 1.64V to clock that high.

Good luck!
01-19-2006, 10:57 AM
K.I.T.T.

@ Pete : What vcore? :toast:
01-19-2006, 11:06 AM
Pete@X

Quote:

Originally Posted by K.I.T.T.

@ Pete : What vcore? :toast:

Hi ...

i did that Prime Run @1,584VCore, but right now that Babe does the same (~ 3h Prime so far) @1,550 :woot: . I´m just on the way to find the min. VCore i need for 10x300 :toast:

As i was asked for a A64 Tweaker screen, here we go (close to 18h Dual-Prime :clap: :
(DRAM Drive Strength/DRAM Data Drive Strength 5/1)

http://www.bilder-hosting.de/tbnl/08L6P.jpg
01-19-2006, 11:13 AM
K.I.T.T.

Very nice :clap:

be sure to post it here:
http://www.xtremesystems.org/forums/...ad.php?t=86531

:)
01-19-2006, 11:17 AM
Pete@X

Quote:

Originally Posted by K.I.T.T.

Very nice :clap:

be sure to post it here:
http://www.xtremesystems.org/forums/...ad.php?t=86531

:)

See Post #17 there :fact:
01-19-2006, 11:24 AM
K.I.T.T.

lol, my bad :p:

Updated now :D

Did you try it at all on air? And any idea what it does at 1.37v? I'm trying to predict what mine will do on higher vCore :) My cooling is really holding me back. Can't wait till i watercool it in a week :woot:
01-19-2006, 11:57 AM
Pete@X

Quote:

Originally Posted by K.I.T.T.

lol, my bad :p:

Updated now :D

Did you try it at all on air? And any idea what it does at 1.37v? I'm trying to predict what mine will do on higher vCore :) My cooling is really holding me back. Can't wait till i watercool it in a week :woot:

Air ... nopes sorry .... not tested, but i know from that babe (on water):

1,328 (CPU-Z) - Bios on Auto/Auto - so should be 1.35V : 10x270 > 12h Dual Prime on water
1,488 (CPU-Z) was 10x290 > 12h Dual Prime (possible less VCore)
1,584 (CPU-Z) was 10x300 > 17h Dual Prime (possible less VCore)

Right now i`m on 10x300@1.550 (CPU-Z) and past the 3h mark for sure ... so does not look bad at all :toast:

Btw ... i know that there are at least 3 batches of so called "Wafernumbers" around ... (Down Left, 7 Numbers + 1 Letter) ... so it could also depend on that how good the 0550UPMW in your hand clocks ;)

Wanna see something really interesting (i could take some pics at the location of my retailer) ->

Opti 170 0550UPMW Batch 50193 :eek:

http://www.bilder-hosting.de/tbnl/07RXP.jpg

Opti 170 0550UPMW Batch 50193 :eek:

http://www.bilder-hosting.de/tbnl/07RZ0.jpg

Just compare them .... both are 50193´s - but from differnt waferset´s :eek:, that could be the reason for some low and some very high clocks ...
01-19-2006, 12:00 PM
ThorLite

Mine new Opteron 170 from trend4pc.de original CPU not pretested......

http://img6.imageshack.us/img6/4982/opt1707ay.th.jpg

First results at 3.1GHz 1.425x1.04 1.478V.Iam using 133 divider since iam testing the cpu.Prometeia Mach I R404 modded for cooling..... :banana: :banana:

http://img62.imageshack.us/img62/660...132m2hj.th.jpg
01-19-2006, 12:02 PM
s7e9h3n

Quote:

Originally Posted by Pete@X

Air ... nopes sorry .... not tested, but i know from that babe (on water):

1,328 (CPU-Z) - Bios on Auto/Auto - so should be 1.35V : 10x270 > 12h Dual Prime on water
1,488 (CPU-Z) was 10x290 > 12h Dual Prime (possible less VCore)
1,584 (CPU-Z) was 10x300 > 17h Dual Prime (possible less VCore)

Right now i`m on 10x300@1.550 (CPU-Z) and past the 3h mark for sure ... so does not look bad at all :toast:

Btw ... i know that there are at least 3 batches of so called "Wafernumbers" around ... (Down Left, 7 Numbers + 1 Letter) ... so it could also depend on that how good the 0550UPMW in your hand clocks ;)

Wanna see something really interesting (i could take some pics at the location of my retailer) ->

Opti 170 0550UPMW Batch 50193 :eek:

http://www.bilder-hosting.de/tbnl/07RXP.jpg

Opti 170 0550UPMW Batch 50193 :eek:

http://www.bilder-hosting.de/tbnl/07RZ0.jpg

Just compare them .... both are 50193´s - but from differnt waferset´s :eek:, that could be the reason for some low and some very high clocks ...

Nice work...which one is yours? ;)
01-19-2006, 12:13 PM
Pete@X

Quote:

Originally Posted by s7e9h3n

Nice work...which one is yours? ;)

None of them :D

Quote:

Originally Posted by ThorLite

Mine new Opteron 170 from trend4pc.de original CPU not pretested......

First results at 3.1GHz 1.425x1.04 1.478V.Iam using 133 divider since iam testing the cpu.Prometeia Mach I R404 modded for cooling..... :banana: :banana:
]

So get it Prime Stable :stick: , mine does SPi on Water 1,6VCore 10x315 and a bit more, but SPi is useless regarding 24/7 stability ;) ... Prime Custom for some hours with FFT`s in place counts :toast:
01-19-2006, 03:26 PM
dogsx2

Quote:

Originally Posted by Pete@X

None of them :D

So get it Prime Stable :stick: , mine does SPi on Water 1,6VCore 10x315 and a bit more, but SPi is useless regarding 24/7 stability ;) ... Prime Custom for some hours with FFT`s in place counts :toast:

Was that a hand picked one Pete?
01-19-2006, 03:43 PM
Pete@X

Quote:

Originally Posted by dogsx2

Was that a hand picked one Pete?

Hiya ...

nopes ... just drove by - picked 2 and left ... so i guess we can call it "lucky shot" :toast: .... the 2nd acts like the 1st ... 10x290 stable @1,488V :eek: ,.. not tested further as right now the 1st is still priming 10x300@1,55V :woot:
01-19-2006, 03:49 PM
dinos22

we need to see when the cold bug hits on these.....very interesting
01-19-2006, 04:04 PM
ReD.SkY

has anyone gotten one of these steppings from the US yet?
01-19-2006, 05:41 PM
Webmonkey

Quote:

Originally Posted by mongoled

Looks to be a great stepping, guys with the 0550UPMW can you please post where you bought your CPU from

I got my Opteron 170 0550UPMW from proshop.dk
01-20-2006, 01:13 AM
-.-PhanTom-.-

Quote:

Originally Posted by Webmonkey

I got my Opteron 170 0550UPMW from proshop.dk

Damn, should have ordered one when I saw thewy had 4 in stock....*slaps my own face*
01-20-2006, 01:49 AM
foodfightr

If anyone gets these from the US, please PM me! I'd like to order one immediately.
01-20-2006, 04:51 AM
mongoled

Quote:

Originally Posted by Pete@X

Right now i`m on 10x300@1.550 (CPU-Z) and past the 3h mark for sure ... so does not look bad at all :toast:

Just beautiful :toast:

Quote:

Originally Posted by Pete@X

Btw ... i know that there are at least 3 batches of so called "Wafernumbers" around ... (Down Left, 7 Numbers + 1 Letter) ... so it could also depend on that how good the 0550UPMW in your hand clocks ;)

Nice find :D

So your pics show:

1st Pic: 1387434L50193
2nd Pic: 1387396L50193

The differences is in the 5th/6th/7th digits, i.e. we have either '434' or '396'. ThorLite has a 434 which also seems like a nice chip (yes i see he is on phase). Pete@X, would you mind telling us if your chip is a 396 or a 434?

ThorLite, have you tried you chip on air or water, so we can try and do a compare to Pete@X. Looks like im going to try and buy from trend4PC.de, will contact proshop.dk (thanxs Webmonkey :)) to see if they ship to Europe. There is a 0550UPMW on ebay.co.uk at the moment, but even though the seller says he ships to Europe, he wont send to Cyprus :mad: , we are in Europe :rolleyes:

Am keeping a close eye on this thread :D

-EDIT-

Just tried http://www.proshop.de but only get a black page :confused:
01-20-2006, 07:10 AM
ThorLite

Quote:

Originally Posted by mongoled

Just beautiful :toast:

Nice find :D

So your pics show:

1st Pic: 1387434L50193
2nd Pic: 1387396L50193

The differences is in the 5th/6th/7th digits, i.e. we have either '434' or '396'. ThorLite has a 434 which also seems like a nice chip (yes i see he is on phase). Pete@X, would you mind telling us if your chip is a 396 or a 434?

ThorLite, have you tried you chip on air or water, so we can try and do a compare to Pete@X. Looks like im going to try and buy from trend4PC.de, will contact proshop.dk (thanxs Webmonkey :)) to see if they ship to Europe. There is a 0550UPMW on ebay.co.uk at the moment, but even though the seller says he ships to Europe, he wont send to Cyprus :mad: , we are in Europe :rolleyes:

Am keeping a close eye on this thread :D

-EDIT-

Just tried http://www.proshop.de but only get a black page :confused:

No i have used only phase.The cpu does up to now 3.13GHz 1.48V dual folding .I believe that with my ss phase setup you gain about 300-350MHz with the same vcore so with air-water it will do around 2830.
Iam very pleased with the cpu so far and iam willing to give to this cpu up to 1.6V i have some MHz still to gain easily............ :toast:
My old 4400+ was really..........:banana: :banana: 3GHz 1.68V
01-20-2006, 08:13 AM
Webmonkey

Quote:

Originally Posted by mongoled

Just beautiful :toast:

Nice find :D

So your pics show:

1st Pic: 1387434L50193
2nd Pic: 1387396L50193

The differences is in the 5th/6th/7th digits, i.e. we have either '434' or '396'. ThorLite has a 434 which also seems like a nice chip (yes i see he is on phase). Pete@X, would you mind telling us if your chip is a 396 or a 434?

ThorLite, have you tried you chip on air or water, so we can try and do a compare to Pete@X. Looks like im going to try and buy from trend4PC.de, will contact proshop.dk (thanxs Webmonkey :)) to see if they ship to Europe. There is a 0550UPMW on ebay.co.uk at the moment, but even though the seller says he ships to Europe, he wont send to Cyprus :mad: , we are in Europe :rolleyes:

Am keeping a close eye on this thread :D

-EDIT-

Just tried http://www.proshop.de but only get a black page :confused:

try .dk instead of .de :stick: - it is a Danish web shop.
01-20-2006, 09:11 AM
mongoled

Quote:

Originally Posted by Webmonkey

try .dk instead of .de :stick: - it is a Danish web shop.

LOL, thank you very much, my apologies. I in no way meant to offend you, hehhehee :p: . Looks like im going to have to apology's to the Germans also, hehheee :D:slap:.

Show 100 post(s) from this thread on one page