OPB 's perspective of DFI SLI-DR Expert

Quote:

---

Originally Posted by Onepagebook

I only can say what he told me, not try to hide something.
Driving strength 10~15 is better for two dimms.

---

This should be
Driving strength 10~15 is better for four dimms.
right?

Quote:

---

Originally Posted by JNav89GT

on a diff note. I have x2 on Modded Mach1 and it's fine. The shipping bios sux though. Needs update. After that on TCCD(Mushkin) I'm running fine near 3.1ghz stable.

The whole killing cpu thing is distressing. I don't have expert yet, but would expect DFI to be on top of things. There must be certain set of circumstances that are leading to death. If we find that out, maybe we can avert?????

---

I think I will be fine for the one Oskar sent me on the way,I don't wanna rock the boat why expert thing turn out to be like that. Oskar has done his best.:D

Quote:

---

Originally Posted by Onepagebook

BTW, on the NF4 UD is also possible to do that but nothing to do with driving & Data strength but bank interleave need to be disable ;)

---

But it kind of sucks to loose 4-way bank interleave that way as it makes up for that 2T a bit. But If Expert does 300Mhz without the need to disable BI then it's a really nice touch ;)

Quote:

---

Originally Posted by Enz0

This should be
Driving strength 10~15 is better for four dimms.
right?

---

Nope.:D
Buddy, think about the other way:D

@Bachus:

BUT, I did enable the bank interleave when I run 4dimm UTT ATM IIRC. :p:
So disable B.I. might be the key in terms of running that on TCCD 4 dimms. ;)

Quote:

---

Originally Posted by Onepagebook

@Bachus:

BUT, I did enable the bank interleave when I run 4dimm UTT ATM IIRC. :p:
So disable B.I. might be the key in terms of running that on TCCD 4 dimms. ;)

---

Sorry, one more Q... Do you know If that Oscar Wu's screenshot from Expert is with or without BI?

Quote:

---

Originally Posted by bachus_anonym

Sorry, one more Q... Do you know If that Oscar Wu's screenshot from Expert is with or without BI?

---

See that time finished initial round ;)
I am postive that according to he told me it's BI on. :)

OPB i feal sad for you, my cpu was only 200€ but it doesn't mather.

its a cpu that SHOULD work instead of KILLED by Dfi branded mobo:)

3200+ opteron died here with the dfi RDX

OPB I am very sorry you lost two great chips :( and am happy that you will have replacements on their way.

You being a great friend hows testing my chip out on cascade when time comes :fact: ?If you want of course. You are great :toast: Thanks for everything you have done for the oc'ing community bro :buddies:

Tim

Quote:

---

Originally Posted by Cpt Twitchy

OPB I am very sorry you lost two great chips :( and am happy that you will have replacements on their way.

You being a great friend hows testing my chip out on cascade when time comes :fact: ?If you want of course. You are great :toast: Thanks for everything you have done for the oc'ing community bro :buddies:

Tim

---

If my loss can just save you guys cpu, then it's worth for that.
just feel bad about that 4600+..hope my new buy 4400+ rcoks.:D

Kevin

Unless Oskar has reworked the who board to be totally different to the RDX200 9~15 may over drive the dimms. Now i know a ton of components have been changed so i now feel we need to know if he has reversed the drive resistors.

As far as im concerned 1 to 8 suits 2 dimms, evens are normal drive odds are week, 8 is strongest and 2 is weakest just the same as 7 is strongest and 1 is weakest.

Now from 9 to 15 im unsure as Oskar keeps this a secret, but to hit 4 dimms 1t i had to run 15 on the RDX which would mean thats maximum drive. Now if you know how to enable maximum drive you would know that certain resistances have to be switched.What we need to know is how he is switching them so we can advise people on how to overclock.

I will be asking Oskar this, we need answers on this.

Hey mentor,

I believe that 4dimm DDR600 2t is set to driving strength as 9

** be sure you check the date of the bios he use.;)

OPB

So now what's the deal if my Expert is a dud? I'd sure like a replacement CPU and board if things turn into an AMD BBQ.

Quote:

---

Originally Posted by Stumpjumper5200

So now what's the deal if my Expert is a dud? I'd sure like a replacement CPU and board if things turn into an AMD BBQ.

---

Bro, Last time when I got BBQ on my 0435 UPAW fx55 claw and the first ever DFI SLI-DR... I did not get anything.:D

http://img53.echo.cx/img53/1267/burned028pz.jpg

Quote:

---

Originally Posted by Onepagebook

Bro, Last time when I got BBQ on my 0435 UPAW fx55 claw and the first ever DFI SLI-DR... I did not get anything.:D

http://img53.echo.cx/img53/1267/burned028pz.jpg

---

wow :shock:

Quote:

---

Originally Posted by Onepagebook

Bro, Last time when I got BBQ on my 0435 UPAW fx55 claw and the first ever DFI SLI-DR... I did not get anything.:D

http://img53.echo.cx/img53/1267/burned028pz.jpg

---

HOLY :banana: :banana: :banana: :banana:!!

Now THAT is a BBQ...that had to smoke like hell...its almost as bad as the video of that duron at 3.3ghz or whatever that exploded... (fake i know, but still funny..lol)

Oh My Go.....

holy sh...t... that's some seroius burnt!

OMFG!
Xtreme AMD BBQ

terrible! haven't seen before.

:eek:

Quote:

---

Originally Posted by Onepagebook

Bro, Last time when I got BBQ on my 0435 UPAW fx55 claw and the first ever DFI SLI-DR... I did not get anything.:D

http://img53.echo.cx/img53/1267/burned028pz.jpg

---

OH MY GOD :eek: :eek: :eek: :eek:

Eh, been there, done that - no biggy :p: LOL

You let the magic smoke out, didn't you? :nono:

That's some extreme carnage there. :toast: Sucks that you lost some awesome hardware though :(

I'm REALLY hoping I don't hear the "Death Sound" tomorrow :stick:

wow OPB. Just wow. :slobber: :slobber:
Btw, sorry to hear about your CPUs. May they rest in peace. :toast:

Sorry to hear about this Kevin.
Seeing the picture you posted reminded of the car I crashed on the track....