I'll work on that :cool:Quote:
Originally Posted by nCrusader
Printable View
I'll work on that :cool:Quote:
Originally Posted by nCrusader
a few days ago i got an x700 in ..
posted a basic voltmod guide here:
http://www.techpowerup.com/articles/...g/voltmods/117
:YIPPIE:Quote:
Originally Posted by W1zzard
That's awesome! Now if you can do a guide on the x600 as well :banana:Quote:
Originally Posted by W1zzard
Thanks man!
Yes, x600 guide. I will take pictures of the back of my card today.
Hopefully the mods will be similair for the 128mb model and 256mb model!
try to get me real high quality pictures like in the linked guide .. i can figure out the rest for you .. if the images are too big to be posted email them to w1zzard@techpowerup.com
if you guys are thinking in doing a guide for the X600, it would be better to put it on a separate thread.:) It's easier for ppl to find it.;)
so whats the 24/7 voltage for vdd vddq and vgpu?
Where does your card stop seeing gains? That's how I try to determine it, I overvolt untill diminishing returns kick in for 24/7 use.Quote:
so whats the 24/7 voltage for vdd vddq and vgpu?
Cool, thanks for takig the time dude!Quote:
W1zzard
a few days ago i got an x700 in ..
posted a basic voltmod guide here:
okey, the core loves voltage, with 1.65v and artic cooling vga silencer rev 3 on gpu i benched 01 in 565mhz room temp (22c)Quote:
Originally Posted by felinusz
Cool, not bad at all :)Quote:
Originally Posted by Snowman89
Mind you, I was only talking about the core when I said:
Quote:
Where does your card stop seeing gains? That's how I try to determine it, I overvolt untill diminishing returns kick in for 24/7 use.
With VDDQ/VDD needing to be overvolted in tandem, I'd ask around and see where GC20/GC16 (whichever you have) chips tend to peak if I were you. Playing VDDQ by ear is not something I'd want to do, even with GDDR3.
What kind of cooling are u running @ the memory ? My mem voltage is 2.1 stock. I can only hit 500 so far. I'll mod it today to 2.2 v for vdd and vddq. i hope i can get 550.Quote:
Originally Posted by the_countess
What voltages are u running on the vdd and vddq ?
Well with the mods here I was able to get my gpu up to 572/625 bench stable... it artifacts like mad but it passes.
Grr artifact bencher :slapass:Quote:
Originally Posted by MaxxxRacer
I just passed you in 01 :D
ok vmodding noob here
measured the 3 voltages according to here:
http://www.techpowerup.com/articles/...g/voltmods/117
vgpu - 1.23v
vdd - 1.97v
vddq - 1.98v
being cooled by a zalman vf700Cu at the moment so I was thinking 1.5v on vgpu and 2.1-2.2 on the vdd/vddq for benching? It'll be at default stock as I don't play many games
picked up 3 50K Ohm trimpots
are these the right ones?
and there is 3 pins sticking out of the trimpots
which ones to use?
which way increases/decreases voltage?
I'm using 1.524 25/7 with no problems @ all. I'm not using a VDDR mod cause the mem did get hotter but my clocks would not get higher.Quote:
Originally Posted by ArcTan
If u lower the resistance the voltage will go up. I hope u have a 10 turn pott. if its one turn it can me dangerous. U cant really set the voltage precisely enough. With the 10 turn pot. Turn it half a turn measure the voltage and repeat it till u have 1.5v.
Good luck :)
here is my X700PRO 128mb heatpipe edition and it's look totaly different against thouse that are shown here? how the heck do i mod this card, vgpu and vdd it seems not to be anything to do a vddq mod on it as i see, anybody who have a clue to do the mod's on it..
http://upl.silentwhisper.net/uplfold...9/PICT1128.jpg
http://upl.silentwhisper.net/uplfold...9/PICT1127.jpg
strange is'nt it
Can you tell me what is written on the chip I have circled, and can you get some pictures of the front of the card.Quote:
Originally Posted by chefnr1
I did the mod on that kind of chips on my Asus AX700 card. so it could be the right one. But with these things u need to be certain that its the good one :)Quote:
Originally Posted by persivore
on that you circled it said- ATMELQuote:
Originally Posted by persivore
25F512N
S127
http://upl.silentwhisper.net/uplfold...9/PICT1132.jpg
http://upl.silentwhisper.net/uplfold...9/PICT1133.jpg
http://upl.silentwhisper.net/uplfold...9/PICT1134.jpg
This is what there is on the otherside i think it has with the mem to do, it shows:
I "some strange sign" R3274
7YA
F71313
http://upl.silentwhisper.net/uplfold...1/PICT1135.jpg
sorry about the downtime that they hacked.
but i really need this mod to be done untill the 26'th this month i will go for an DI race with X700PRO and X800XT PE, so the X700PRO mod is quite essential time is running:)
Can you tell me what is written on the chips I have circled please.
on all these four chips it's written.Quote:
Originally Posted by persivore
1571
PLFV
Can you post a close up pic of one of the chips marked '1571'. From that, I might be able to work out if they are just MOSFETs, or are some sort of votage regulator. I've searched, but I can't find a datasheet for the chips :(.
It looks like there might be some smaller 6 pin devices on the back of the card, which could also be voltage regulators.
This is as close i can take a pic hehe hope you can se it clear:)
http://upl.silentwhisper.net/uplfold...4/PICT1137.jpg
hope thats help i took it where i saw it best other side is the heatpipe cooler an cant se it fom that side but it's the same chip..