Printable View
Nice scores... I get 30903 with my winnie at 318*8,5 - using divider, but tight timings... - 252 mhz 2,5-2-2-5 - and my gfx at 621 / 625 :(
Why dont I get a higher score?
BTW whaaat, does the superPI patch boost winnie ? :P - I must have that patch then... - Get neeearly 29 seks... But 30 still :(
Man.. I'm thinking about selling this X850XT-PE and finding an X800XT PE PCI-E card as those seem to do have less problems. Any idea to where there is some in stock? Currently, I know Asus is the only one that makes these cards.
Poor ol' 754 claw from a year ago with weak lil' 12 pipe x800pro and watch it keep up with the big guns... 31,366
The TRP to 6 seemed to help me quite a bit... card's memory originally wouldn't make 540 without artifacting, but with the TRP increased jumped to the high 580's. Core increases barely helped when the memory was that damn slow. I think for me the GPU was so starved for bandwidth that the increase in memory speed completely offset the increase in latency...in extreme cases where the core is running way higher in proportion to the memory this timing loosening trick can be helpful. I don't have side by side comparos yet but I reckon the net gain is around 300 points in 3dmark03 for me with loosening the TRP.
Wasn't sure how to do a comparo exactly. First score is at 594/553 with TRP 5, second is at 594/587, with TRP 6. However, the latter is completely clean and 100% artifactless. The former is the biggest mess I've seen in my life. If I wanted to do a totally fair comparison, it'd have to be around 535-540 with the TRP 5, making it suck even harder. Not sure what's up with my ram that makes it run so ridiculously slow at stock timings, but changing the TRP to 6 completely alleviates this. It seems to take only about a 100 pt hit compared to the other scores on the ORB at similar memory speeds. All things said and done, bumping the TRP helps me by about 300-500 points ultimately. But that said, I doubt it'll help those whose memory speeds are well in excess of 600. At that point, it might actually be better to tighten the timings and take a small speed hit.
There is.Quote:
Originally Posted by Mcklain
http://arc.aquamark3.com/forum/showt...&threadid=5243
where on the board can i do a pencil mod for vgpu? tia
Looking forward to clocks and benches Jupiler.Quote:
Hehe, bedankt.
Perkam
Thx.Quote:
Originally Posted by perkam
But it probably won't be before next week though.
Wich driver set did you try it on?Quote:
Originally Posted by Sheik
Mcklain
Catalyst 5.2's Before the patch I could not complete AM with X850XT PE or X800XL. With patch AM runs fine.
Pleasure. I was stressing nicely before I came across it.
Need to get my score up... http://arc.aquamark3.com/arc/arc_view.php?run=957359679
Whoa...what kind of timings, just ram?
I downloaded it. Any suggestions on how far to push my 044X winchester and 339WE BH-5 (3.4v)?
Sorry to be the n00b here...
Here:
VDIMM: 3.771
VCORE: 1.680
VCHIP: 1.650
183* locks my PC instantly at multiple speeds (250/260/270) and different voltages (3.5/3.6/3.7)
And I think my maximum stable memory/voltage is 260/3.6.
I know my CPU can handle up to 8x330 (2640) because I have been able to run
that with memory dividers, so I don't think it is the limiting factor here, the ram is.
I do have some Corsair TCCD on the way so I'm trying to see how
much I can pull out of this BH-5 before then, I'll probably sell it.
Thanks for the help Ice...keep it coming. :banana:
Well hey at least I got my score up 7k to 82.7k:
http://arc.aquamark3.com/arc/arc_vie...run=2098212292
Not too shabby for a 2x256MB set of old BH-5 I think... :D
Board runs nicely.Quote:
Originally Posted by Steven
Had no problems at all with it.
My Corsairs BH5 (2*512) can run at 250Mhz, 2-5-2-2,1T at 3.22V, which is pretty good, IMO.
Well,
Did a fresh install of W2k + SP4 today, some tweaking and managed to gain 1600 points.
Card was still running on air.
Nature was locking up with GPU at 615, so had to back it down to 611/612.
Other runs ran fine at 615 though.
Drago high gave me artifacts with 635 mem, nature didn't.
Winnie 3000+ @ 2758Mhz
DFI SLI-D
2*512MB Corsair BH5 @ 251Mhz, 3.24V
X850XT @ 612/635 air cooled, Cat. 4.12 installed
33369
http://users.skynet.be/MetalHead/X850XT/33369.jpg
Heres 850xtpe with air.....
No problems at all....only a little low on nature :)
Jupiler, there's your bottleneck ;)Quote:
Winnie 3000+ @ 2758Mhz
Perkam
I know, but it's about the highest it will go.Quote:
Originally Posted by perkam
Adding volts didn't help at all. Tried up to 1.8V, memory divider at 133/120/100, but nothing. 3d01 froze at CL or CH.
But still not that bad after all, among all the FX55 power. :)
Forgive me if I didnt read the entire thread but, is that a NON-PE without any vmods ?Quote:
X850XT @ 612/635 air cooled
Perkam
Correct.
Non PE, no mods.