That's pretty decent man! W/ some more voltage that stuff could do 260 I bet!
Printable View
That's pretty decent man! W/ some more voltage that stuff could do 260 I bet!
Yea this Kingston will do loops with 3D Mark up to 245 Mhz with maxed 2-2-5-2 timings and maxed bios settings, deffintlly a winner. No xtra cooling, not even a North Bridge fan.
OPP
:slobber:
That's one excellent overclock ! Congrats , OPP !
:toast:
Anyone know what chips the just announced OCZ DDR466 and DDR500 will use? I hate to even mention OCZ from past experiences, but DDR500 sounds tempting, doesn't it?
Did anyone see that review with the OCZ sticks doing 500DDR or something: :eek:
Also this HyperX has just gone on sale here in Australia. I have xms3500 that does 220 @ 2-7-2-2 @ 2.95vdimm so I dont think I will be changing my ram for the time being.....but I might be getting a review sample of it :banana:
HOLY MOTHA OF GOD!!
/taking out his ocz
/calling Kingston
would a stick of this Kingston help me out???
The best I can do is 454 at cas2, 3,3,7
C
Somebody stop me!! :banana:
OPP :D
hey OPP :)
i'll be getting an NF2 board, and i need 2 sticks of 256mb to go with it.
after that, it'll be a really long while before i buy any more ram.
is Kingston pc3500 the one? :p
great job there, btw :)
Thats what Ill be useing on the nForce :) My Corsair nor my OCZ can do this:D I just hope all the sticks of Kingston are this good.Quote:
Originally posted by dmitriyaz
hey OPP :)
i'll be getting an NF2 board, and i need 2 sticks of 256mb to go with it.
after that, it'll be a really long while before i buy any more ram.
is Kingston pc3500 the one? :p
great job there, btw :)
OPP
OPP
OPP,
Congrads On Continuing To AMAZE!:D
I had better luck with the XMS3500 With my 2 Nforce2 boards... And with AMD boards in general... But then I had 2 sticks of the 512mg Kingston...
I know you can pull stuff out that nobody can, so I'll watch how you do with the NF2... If you can get it higher than 211FSB, I guess I'll be Re-Buying the Kingston:D
RoydRage
Holy $#!^ Thats just incredible. I guess that Kingston really did produce!
Hey OPP, what Vdimm for that 510DDR?
3.1V-3.2V? :D
Hehe very nice :)
Thats it, youve convinced me now Opp :D
VERY VERY VERY nice man...2-7-2-2 @ 510DDR @ 3.3vdimm....:eek:
How far did you get with about 2.95vdimm bud?
Cheers
:)
Opp thats so pretty you bring tears to my eyes.
I've read in another thread these same Kingston sticks not performing as good on a Amd board, true?
Sorry RoydRage just read your post, guess that answers my question.
If these Kingston sticks are doing that well on a p4 board, they should at least do better than the xms's on an amd board. Opp, have you tried them in any other AMD board?
I believe the 3500 will do well on an AMD board if you can give it the voltage.
I used 3.01 Volts on the mem, the I/O voltage that CPU-Z shows has nothing to do with the mem voltage.
My IT7 Max2 2 only goes up to 3.01V:D
OPP
OPP,
which bios are you using? the modded one from overclockers.com? it gives 3.2v in bios / 3.09v actual. however, you can crank it up even more by turning +3.3v pot in your PSU. i hope you didn't do it yet:)
has anyone tried the Kingston in an NF2 in dual mode? Also, any guess on what chips it uses?
I got the modded bios from the forums here somwhere, it still maxes at 3.01. I don't have a 3V pot, I'm using the Vapo and have a enermax in it. My TTGI is on the Prometeia, and even though it doesn't have a pot it will still strengthen the 3V line, I'll try it some time.Quote:
Originally posted by QuadDamage
OPP,
which bios are you using? the modded one from overclockers.com? it gives 3.2v in bios / 3.09v actual. however, you can crank it up even more by turning +3.3v pot in your PSU. i hope you didn't do it yet:)
xgman,
No clue about the chips myself.
OPP
Just open up the heat spreader and tell us, Opp.
LOL