if need any updated bios , let me know!;)
Printable View
if need any updated bios , let me know!;)
The DFI doesn't support Bank interleave or it is disabled which helps bandwidth greatly. Other boards usually have this enabled. This is also the reason the DFI is able to clock much higher as when it bank interleave is disabled you have much more headroom to work with. Happenedi with the DFI NF2 offerings. 250 on the DFI was same bench speed as NF7 at much slower.
next time oyu guys bench NF4 wiht sisoftsandra watch that oyu can get really weird results via what multi you use.
on the asus sli
12x200=2400mhz=6200mb/s
13x200=2600mhz=5600mb/s
everytime It was way out of wack not sure if this is what some are seeing on sandra via the new NF4 boards.
on 939 the bandwidth is directly related to cpu speed as well as mem speedQuote:
Originally Posted by choseone214
I have a X800Xt here, 500/500 stock clocks. I never put it on cooling yet. Just got done with mods and I'll be playing tonight. I'll see what I can do at 3.4G on the FX and 1.7V with this NEO4 for now. I can tell you at 264x13 I'm already getting 233 in Lobby High with card at 520/560.Quote:
Originally Posted by Overklokk
Bigtoe
Sorry about off topic. Thats my last post. I'll let you get on with your DFI thread:D
OPP
no 12x200 is faster than 13x200 in sandra ;) I know what it "SHOULD BE"Quote:
12x200=2400mhz=6200mb/s
13x200=2600mhz=5600mb/s
everytime It was way out of wack not sure if this is what some are seeing on sandra via the new NF4 boards.
on 939 the bandwidth is directly related to cpu speed as well as mem speed
I have the bios files m8...they have issue though...ask Oskar as he has been working with Wesley.Quote:
Originally Posted by Onepagebook
This board it seems is tuned pretty much for TCCD which i feel is bad. Many will want to use modules they already have from previous builds. Im sure we will see a few more bios builds during the next 2 weeks.
Its also CPU dependant, my 3800+ gives higher bandwidth than the FX53 i have. I also know the FX55 gives even higher reported bandwidth so its all down to memory controllers.Quote:
Originally Posted by choseone214
DFI has memory interleaving option completely off, EPOX has it on 2 like many manufacturers. Could u please email Oskar and ask him include a memory interleaving option (disable, 2 and 4) in final debut BIOS?Quote:
Originally Posted by bigtoe
thank you. :toast:
Bigtoe, I was wondering if you have PDP/Patriot TCCD Rams to test with? I bought 2 Dimms not too long ago and it would be great if the board works well with the RAM that I got.
He already said he can only test with OCZ RAMQuote:
Originally Posted by Sgt_Strider
i wonder why dfi never use bank interleave? they said it doesnt do anything when we asked them
Weren't your results with BH-5 pretty good as well? :confused:Quote:
Originally Posted by bigtoe
Obviously, the A64Tweaker cannot change that?Quote:
Originally Posted by enduracell
My old Winchester 3200+ gave me about 700MB/s more than my FX55 with the same config and mobo. See it here.Quote:
Its also CPU dependant, my 3800+ gives higher bandwidth than the FX53 i have. I also know the FX55 gives even higher reported bandwidth so its all down to memory controllers.
any news on what to expect with OCZ pc4200EL then (2*512mb) ??Quote:
Originally Posted by wicktron
I don't have any 4200EL Platinum here to test although my 3200Plat rev2 does do similar speeds. My hynix based 4200EL is not so hot which is weird as it does 300 or so on other 939 boards i have tested.Quote:
Originally Posted by [G.N.U.]Fragman
Tony, I may have missed it, but how does the LT multiplier scale with the HTT. You said if set at 5X it started to scale down as you increased the HTT. Can you explain what exactly you were seeing and where? Thanks.
Also what was the "sweet spot" for your newer tccd sticks voltage wise.
Same.Quote:
Originally Posted by µnrealneo²
So there is Bank Interleaving issues :(
Can somebody confirm this?
already ordered the sli-DR and a 3200+ winny and a little leadtek gf6800GT pci-e...so soon i will ask you guys about all the new things :)
:D O.K. - am I wrong or are the MOSFETs placed on that board on the right side of the CPU and not as usual on the left ?
:toast:
Also, are the temperature and voltage sensors actually remotely accurate on this board? It's :banana::banana::banana::banana:ING expensive, I expect the sensors to atleast work properly unlike the S754 Lanparty's sensors.
Edit: Damn bananas.
:D BTW - I think we will ask YOU.........., and "soon" also can be many weeks !Quote:
Originally Posted by [G.N.U.]Fragman
:toast:
oi Tony, does the bios support boot from USB Flash Drive? I would like to rid if my floppy if so. Thanks.
Quote:
Originally Posted by bigtoe
ya I can tell..
I got 5 bios here already.. :D