what are the timings on the card (stock)?
Printable View
what are the timings on the card (stock)?
timings? no idear...
doesnt the leadtek 6600gt extreme bios from the databse work? should i rather make a copy of my bios and post it here? how do i make a copy of my bios?
to make a copy of your bios just use savebios (not sure where to get it. check mvktech.net). I meant stock clocks (ie 500/500).Quote:
Originally Posted by saaya
stock clocks are 550/1125
cant you use the leadtek 6600gt extreme bios from the database?
im sure its the same bios i have on my card now...
OK, here is your bios. It has 1.4v, and stock clocks (didnt know if you wanted me to up them any). As per your earlier post, If anything goes wrong, there is definetly at least 1 person that went through something like that here that could help you. Nothing wrong should happen though.
Can anyone mod bios for XFX 6600GT PCIE 128MB?
i have 2.0ns samsung.
thanks
i saved bios with savebios but it's only .BIN
and opened this bin with nibitorv but all fuxored...or grayed :(
I dont know why it would be .bin, cause the one I got off mkvtech.net was .rom. Here is your bios, but it is a rom bios, so you could try flashing it with this. Also, you could download hexeditor and change it to .bin, or I'll do it if you want. Here it is as .bin and .romQuote:
Originally Posted by TEDY
yeah but still 1.4v :(
thank you !
Well .bin or .rom doesn't matter. Normally .rom is the most common used for NVIDIA BIOS's and .bin for ATI BIOS's...
is there any mod-bios for Chaintech 6600GT agp? the card didnt have any temp monitoring...
If you can provide your BIOS we should normally be able to activate the temp monitoring...
will post it here later thanks mavke... i still under 12hours priming my proc...
Okay! That is fine and then I can look at it.
Mavke here's the bios for Chaintech 6600GT agp. if possible can u do two vers of it:
1. original bios + temp monitoring
2. modded with some tweaks + temp monitoring
so far the card work fine interms of performance but still cant break the 10k barrier... with my system only can reach 9.9k
http://service.futuremark.com/compare?2k3=3770305
thank. :)
Okay I will check and get back to you... But don't get impatience, cause I am leaving to Stockholm in about an hour and I will only be back on Friday (yeah for work, and this modding and stuff I do next to working)...
But just try NiBiTor v2.0a and you can make the above changes yourself via that Tool. :)
I dont mind modding the bios for you. I have 2 different bios. The first one has 1.4v and the temp monitoring, and the second just has temp monitoringQuote:
Originally Posted by rzonealley
thanks a lot moddolicous...
will try it out n tell u the result later.
edit: the temp monitoring work fine :)
what usually people edit there in nibitor?others than increasing the voltage?
i'm quite new in this bios modding.
I have Sparkle GF 6600GT AGP with memory 2.0ns, i download form MVKTech site orginal bios to my card and mod this bios to this file. I search this program for more volt on chip beacuse i wan't bios vmod for card. I'm stupid also this program not give more volt ( higher on 1.4v ) ? :am: Please verify this mod bios file.
Sory 4 my english ;)
Ok i'm flashig the bios mod by me whit MVKFLash_SLI_Flash.V1.2. A clocked card in bios: core 550MHz and memory 550MHz. After flash i go to windows and looking clock of card in driver page; core ok ( 550MHz ) but memory 700MHz :confused: What i wrong doing?
Sory 4 me english
how to remove the hardware limit on bios?
Hardware limit? What do you mean?
Hi all...I have a Prolink 6600Gt 128Mb AGP...I have overclocked it by modding BIOS... so now I stay at 545/1200.....Very low result for the CORE!...at 580Mhz card freezes...at 570 works well but there are some green artifacts...at 560 Mhz no problem but memory frequence stops at 1050Mhz beacause creates artifacts...with 545 Mhz Core Speed, memory at 1200mhz has no artifact. The Core has by default 1,4V...is it possible to increase it by the bios? I have attached my frequency modded bios...can someone voltmod it? Thanks to all!
Hardware limit. when u oc the driver will detect the limitation of the card provided by bios right? in example max for my card clock is 590/1260. when i push it more on core or mem and test setting it will revert back to the previous clock. i guess its becoz of limitation thingy isnt it? i'm thinking bout removing the limitation and see if my card can bench at 600/12xx or hopefully 600/1300.
i dont know the things such a limitation is exist or not. but if theres limitation i'm willing to remove it thats what xtreame is all about isn't it. hehe
And you are lucky! My card stop to go with driver overclock at 580/1100....now I stay at 545/1200 thanks to Bios Update....Quote:
Originally Posted by rzonealley
But haven't you any visual artifact at 590Mhz?? In 3dMark03(Battle of Proxicon) I see green triangles on robots..