Well my Oc isnt in air, but i got my xpm2600 to 2.8ghz. On air it does 2.6 ghz. Load temp is 109. I am going to try to get it to 2.9 or 3ghz when i get my ram back from RMA
Printable View
Well my Oc isnt in air, but i got my xpm2600 to 2.8ghz. On air it does 2.6 ghz. Load temp is 109. I am going to try to get it to 2.9 or 3ghz when i get my ram back from RMA
It will be nice ! :toast: :DQuote:
Originally Posted by MaxxxRacer
Quote:
Originally Posted by AMDfan
What do you mean it will be nice?? The oc on the memory? It better..
It's very hard to get the XP-M over 2900MHz with Watercooling!
I can bench up to 2870MHz @ ~ 2,00V, but bit over 2870MHz
and the Sys. crashes. U need a really good PSU, bcs the
12V Line will hold u back ;)
Yeah it doesnt want to go much past 2.8. A few mhz over and it decides to crash. Even at 2.25 volts. Its not that big of a deal considering i wouldnt ever want ot actually run it at 2.25.
Managed to get mine stable at 2.76 with only 1.92vcore. I think my 12v rail is holding me back!
my results with mobile bartons are as follows...
XPm2500+ --- 2.4ghz max
XPm2400+ --- 2.3ghz max
XPm2400+ --- 2.5ghz max
all of this is using an SLK800 + 80mm tornado
Vcore dips to 1.88 but she runs rock solid!
http://home.comcast.net/~dmpickard/cpu222.jpg
Xp-m 2500 AQYHA 0410 TPMW
http://membres.lycos.fr/boblemagnifi...cpumark282.png
Cooling? Voltage in Bios? Motherboard? PSU?
:D
2.125/2.15vQuote:
Originally Posted by GravdiggA
NF7 (26D)
Mach II (soon R404 inside)
Fortron 350w aurora
(BH5 single tested NF7 vmod 3.87v - 268mhz 2/2/2/11) -> vmod vio/vdimm
Ah, Mach II ;)
Any special Northbridgecooling @ 268 MHz FSB, and which Voltage = Vdd ?
My Sig. isnt correct now i have the Vio = Vdimm Mod, too.
xp-m 2600+ IQYHA 0401 XPMW
225,5x12,5 = 2.819MHz @ 1,95 Volt BIOS
SiSoft CPU ALU: 10.312; Whet: 4.216
Air-Cooling, "TT Volcano12Extreme"
Nice Electroid. But we got a winner for pifast already.... Cant remember who did it. He is one of hte bigger guys in the forums and Does Nf7-s bios modding.
I wonder how fast I can get my cpu with some extreme cooling. I just whish i could get my fsb higher though. I found out that the 335 wasnt prime stable. neither was 230 or 225. But as of now im running it at 225 as prime stress testing is the only thing that makes it crash at all. Every other benchmark or prog (havnt tried rendering with 3dsmax yet) that I have tested for extended amounts of time has been stable... But with prime the memory controller just gives out on me after a few minutes.. its a pitty.
It is SAE, and he have a DFI, too :) 30sec SuperPi ! 39,xx sec Pifast !
Yes, it's SAE with 30sec in SP1M but 43.92 in Hexus PiFast...Quote:
Originally Posted by GravdiggA
Cant wait till we past that time in Hexus with 12*270FSB :cool:
Ups, i thought he said "I have broken the magic 40sec" but then it was
the magic 44sec :D
Hehe. I did a pifast at 12x271 and I could not break 44secs with the fastest timings possible... so try it then. 12.5x263 is faster, believe me ;)Quote:
Originally Posted by Dani
Yeah, fsbs and multis are wierd like that. At 230 I was getting better performance than at 238. And the core speed was lower too! so I dont know.
My 1mpifast is 37 seconds... and my hexus is 53.XX. I dont know why the hexus is so slow. I see guys on there with cpus and fsbs that are lower than mine with the same mobo who are getting in teh 40's. I just dont get it. I think that they lied on the scores or seomthing. I wish hexus would demand that every entry be acompanied by a screenie of hexus pifast and cpuz.
I see there are a TON of you guys using the mobile bartons and a friend of mine just tossed me a FREE Asus A7N8X Ultra motherboard for the hell of it. I found a really great site for the mods for this board and i think i'll use it as my first board to play with and practice mod'ing on. What i'm wanting to know is which barton stepping/week is the best IF there is one. I've noticed that many ppl are using 2400-2600's and reaching about the same speeds on air so is it just luck of the draw? All of them are around the same price almost so that's not really a concern. Do the majority of you get the 35w mobiles or the 45w .. does it make much of a difference? Sorry about asking so many questions but i'd like a little more input before i purchase and there's so much information in this thread i can't make up my mind :D
btw, thanks in advance!
The Mobils are much better then the others and they are unlocked(!!).Quote:
Originally Posted by PnoT
My XP-M do 2800MHz @ 1,87V on water.
Try to get an Mobile with IQYHA MPMW/XPMW/RPMW from 0351 to 0406,
FQQ4C in Stepping is the most important, its the 45W 1,45V one.
Good Luck :)
Appreciate the input,
So you do want a 45w instead of the 35w one's correct? I thought it was the other way around but then again i could be mistaken. I usually buy them off of newegg since i'm right across the border and get no tax and 1 day delivery =) Where can you special order stepping/weeks and whatnot from any ideas?Quote:
Originally Posted by GravdiggA
The 2400+ XP-M with 35W and 1,35V are for an other Socket!
Doesnt fit into Socket 462! Imho they are only for portables.
Dunno where u can ask for stepping in the us, im from ger. :)
But try to call them, or ask some us friends, or look at
an pricewatch site for an good shop.
http://www.newegg.com/app/ViewProduc...103-436&depa=0
This one.
Quote:
Originally Posted by GravdiggA
There are also some pga socket A ones out there for a while (some months). But avoid the µpga ones as these are the cpus GravediggA's talking about.