yeah bro don't boot staight 4.try first trdrd 5 and check stability,then try tighter
Printable View
yeah bro don't boot staight 4.try first trdrd 5 and check stability,then try tighter
Quick question, does the OC Formula M have Conformal coating?
Quote:
Originally Posted by MetalRacer
nope~~ , only Z87 OCF have it .. it takes more cost and time to produce
80% of the psc Ive run wont do trdrd4 on air ;) try 5-6-4 if passes, try 4-6-4Quote:
Originally Posted by XBrytanX
Im using
1.27vCore
1.27vCache
+.400 SA
.250IOA
.250IOD
2.28vCCIN
6 is good ,but I need 4 Nick :yepp: and yes you (me) have to have pretty good set to do 4 ..I figured my best kit can pull it of tho (will play with it some more-if they won't cooperate -cold will make them :) )Quote:
Originally Posted by nickshih
:up:Quote:
Originally Posted by crustytheclown
Thanks buddyQuote:
Originally Posted by Splave
hi Nick, in Europe there's no trace of OCF.
the ship is still going through the ocean?:D
Great job anyway, i can't wait to bench the OCF!
Quote:
Originally Posted by THERULE
It is ture . our production is delayed little bit .
I believe it will be in stock soon .
:shocked:
BBSE looking good here although i'm a bit dissapointed with some tertiary...
Mem training is very stressful at these frequencies...
How do you guys get such low trdwr?
Coating is all the money,first time a didn't used any vaseline...
http://imageshack.us/a/img90/1817/ws8n.jpg
http://imageshack.us/a/img856/7610/whp.jpg
Quote:
Originally Posted by crustytheclown
you trdwr is good enough
it is still depends on your kits also IMC
please try to loose Tfaw to 26
but ur timing looking good
i will have new bios to patch new PSC and BBSE LN2 preset timing ...
how about 32m benching ?
i'll do some 32m hopefully today,cpu is on air propably that's holding me back:D
Quote:
Originally Posted by crustytheclown
100% sure u can do better with cpu under cold . -50 is nice
time to fire up sofos' ss then...:D
so much this +1000Quote:
Originally Posted by nickshih
Quote:
Originally Posted by Splave
:welcome:
Holy crap. Sold out on Newegg in a matter of hours. For some crazy reason, UPS returned my original package after taking it half way across the country (so I never got the first OC Formula that I ordered). I ordered again 15 minutes ago, and just checked now to find the board OoS. These things are selling like hot cakes.
^^^:yepp:............:rofl:
Quote:
Originally Posted by ChanceCoats123
in stock now . also the 802.11 AC one ..
what's the proper way of setting 1.25 or higher strap on this mobo ? ..I keep getting 15 :shakes:
Set 125 and 125 bclk divider and filter pll high bclk mode
got it :up:
Pretty in pink:DQuote:
Originally Posted by Splave
Normally , u dont have to touch the bclk ratio . i have auto ruleQuote:
Originally Posted by XBrytanX
u just have to change the bclk u want ...:up:
^^ where can I find all the D-Bug codes for this MB....71 and 78 in particular ( the PDF only shows few ) ,I was also wondering when to use PCIE PLL Selection
Thank you
Quote:
Originally Posted by XBrytanX
keeps those options in auto , already choosed best one for you
71 78 mean PCH unstable ... memory unstable or bclk too high might cause this issue .