Gigabyte's Full AM3+ Line Up Now Online

its time to play :D

http://downloads.criminalcafe.com/fotos/amd/am3+/7.JPG
http://downloads.criminalcafe.com/fotos/amd/am3+/8.JPG

first 3d11 score

http://downloads.criminalcafe.com/fo...11%2012830.jpg

Gigabyte 990FX UD7
960T @ hexa 3900MHz(don't blame me ...the cpu wont run at 4Ghz+ :D )
CPU Cooler - G-Power2 from Gigabyte
4 x Zotac 480 reference card 840/2000MHz
2 x 2GB RipJawsX 1600C6
1 x SSD Intel 40GB
1 x Antec HCP 1200watt
room temp at 28c

and the TUBE

click on image
http://downloads.criminalcafe.com/fo...way%20tube.jpg

well,now we are ready for real action,next saturday me and my wife will make a LN2 session.
we dont have any 1100T in hands but i will try to find a good one and this time i will assist her and me think some AMD WR will be smashed by Yoko at Ustream :D

AWESOME :D


btw my technician in HQ sent me an email with a test using same hardware and got this results with the HDD benchmark

http://img804.imageshack.us/img804/6008/81203423.jpg

WOW its a very fresh score,he is using new driver?

he did another one last night but it wasnt the OS drive so i asked if he could repeat it but run it on OCZ as the OS drive and results were same :)

Quote:

---

Originally Posted by PcCI2iminal

WOW its a very fresh score,he is using new driver?

---

Try the latest AHCI driver from here.

he's saying he didnt seem to have any issues clocking NB with his chip

i havent run this benchmark before though but he's at 2800 with a slight volt jump he said

http://img268.imageshack.us/img268/5963/nb2800.jpg

http://img857.imageshack.us/img857/1904/p1000526p.jpg

ok so i decided to yank out my board to test this NB stuff quickly from my end and i dont see a problem. This is the first time i tested this CPU also and it will do 3000Mhz nb easy :shrug:

http://img651.imageshack.us/img651/4886/img8181uu.jpg

http://img199.imageshack.us/img199/4074/img8182yt.jpg

http://img52.imageshack.us/img52/913...board01yul.jpg


Here is 3200MHz NB with same settings also.....maybe try a normal hard drive rather than the OCZ one, no idea whats up with your rig but i dont think its a board issue :s

http://img109.imageshack.us/img109/4...pboard01bm.jpg

uncore at AMD is cool impact...Try Cinebenchs R11.5, superpis, 3D Marks etc etc or so...here u can see next impact in score...My 1090T hit 7.8points in r11.5 (aircooled)

For Thuban si 3 GHz at uncore "nothing". Example, my 1090T can hit stable with 1.28V 3GHz at CPU-NB, my 1100T with 1.3V. Thubans topped in stable setings at 3000-3150 MHz with CPU-NB voltage about 1.3-1.35V

my superpi 1M (aircooled)
http://www.hwbot.org/image/523773

here with only 2 cores my record in 32M at AMD
http://www.hwbot.org/image/574205

you have a record with 4.6Ghz only lol, chew why are AMD guys being so lazy :D

FlanK3r this thread is not about e-penis, we can make it one if you like but you won't like it :D

Ok, but I wanted only show, 3 GHz with Thuban is normal value...Maybe u had something wrong with BIOS?

i am using F3 and my colleague in taiwan is also using the same bios and our rigs dont seem to have this sort of issue

3GHz is not normal for 965. i remember one of my chips had a hard time around 3GHz and second 3.1 on normal cooling. this X6 could bench at 3.3 NB also from my testing tonight but there is no point, the issue doesnt seem to exist here

Quote:

---

Originally Posted by dinos22

you have a record with 4.6Ghz only lol, chew why are AMD guys being so lazy :D

---

Heh I think he's referring to his own personal record :p:

That time can be beaten by pro and myself at under 4.5 gig :D

Quote:

---

Originally Posted by dinos22

i am using F3 and my colleague in taiwan is also using the same bios and our rigs dont seem to have this sort of issue

3GHz is not normal for 965. i remember one of my chips had a hard time around 3GHz and second 3.1 on normal cooling. this X6 could bench at 3.3 NB also from my testing tonight but there is no point, the issue doesnt seem to exist here

---

ah, I thought, u told about your 1090T...of course, for Denebs is stable limit about 2800-2900 MHz with better chips. My 970 BE is freak :D, only 2650 MHz at CPU-NB :).

Chew*: man, with u is no chance to win in benchmarks :p::)

My 965 was a freak, benched 3130 NB in 1M, about 3050 in 32M...good for 3000 24/7. However, that CPU needed 1.55v for 4 Ghz stable...lol
My 1100T does exactly the same at X6...it needs 1.34v on CPUNB for 3000 stable. 3375 is the absolute limit in 32M on two cores @ 1.46v. However this CPU does 4 Ghz at 1.43v.
My 565 is even worse, 2800 NB is stable at 1.35v, however it will not even bench at 2900. I cant even boot at 2900 up to 1.45v. This CPU does 4 Ghz @ 1.42v, however will not boot above 4.2 Ghz @ 1.55.

I would call my 1100T on the bottom half of normal. 3000 to 3200 CPUNB seems the norm for 24/7 use. Anything higher and you probably have a gem, anything lower than 3000 I would be bummed out. My CPU seems pretty normal I would suppose core wise as well, it does 4.1 @ 1.48-1.5v (hard to tell because of board limitations)

For X4 it looked like 2800-2900 was normal, and those of us with chips that did above 3000 were special.

Quote:

---

Originally Posted by BeepBeep2

My 965 was a freak, benched 3130 NB in 1M, about 3050 in 32M...good for 3000 24/7. However, that CPU needed 1.55v for 4 Ghz stable...lol
My 1100T does exactly the same at X6...it needs 1.34v on CPUNB for 3000 stable. 3375 is the absolute limit in 32M on two cores @ 1.46v. However this CPU does 4 Ghz at 1.43v.
My 565 is even worse, 2800 NB is stable at 1.35v, however it will not even bench at 2900. I cant even boot at 2900 up to 1.45v. This CPU does 4 Ghz @ 1.42v, however will not boot above 4.2 Ghz @ 1.55.

I would call my 1100T on the bottom half of normal. 3000 to 3200 CPUNB seems the norm for 24/7 use. Anything higher and you probably have a gem, anything lower than 3000 I would be bummed out. My CPU seems pretty normal I would suppose core wise as well, it does 4.1 @ 1.48-1.5v (hard to tell because of board limitations)

For X4 it looked like 2800-2900 was normal, and those of us with chips that did above 3000 were special.

---

It all depends......I have some chips with really decent NB on ln2 and they suck on air. Vice versa with good air chips to ln2. It all depends on what your goals are.

man these 3TB WD drives arent too bad at all performance wise hey. i fired up ATTO to see whats up with them these days, pretty decent :up:

http://img696.imageshack.us/img696/4...board01ccd.jpg

Quote:

---

Originally Posted by PcCI2iminal

yes it updated :(
i will send a mail with all issues we have now.



no ,the first run with a single disk was 0 Fill ,because i was making a direct comparision with his guy,
he used 0 fill also


its the same disk and under the same firmware
but he is using an ASUS M4A87TD - USB3

the write seems Ok,but not the read and i used the Microsoft ACHI drives and AMD ones
and after re-checking again,the Microsoft ones gave me a boost in read but i loose in write

---

thats fine, u should see much more 4k random read improvements in the 240GB version, since of 25nm use.

So what's wrong w/ the Gigabutt? I was desperately trying to find my UD3, might go for ASRock then....


Do the testing w/ newer bios/ firmware.

here is my old STT Sandforce 1200 in my older Gigabyte 790fx-ud5p

http://i56.tinypic.com/2dkl7h4.jpg

Barr3l Rid3r read the rest of the thread and my replies

barrel, have a patience ;) I got ud3 recently :p .. ud3 is probably in ship which is on way to Brasil lol.

This Gigabyte 990FXA UD7 is a lovely, powerful board, i think this is the one im gonna get for my upgrade as soon as its out, i like the layout and that it has 6 sata3 ports as well as 2 esata3 ports.

Good thing about this upgrade for all of us that have a 790fx that skipped the 890fx series we just need to purchase the mobos 990fx and use our existing mem, cpu, graphics, psu, brill eh.

Then once bulldozers out replace existing CPU and your done.

What a lovely upgrade path.

At present i think my rig fat and i can only see things getting better for me.

Phe2 965 4.0Ghz
MSI 790FXGD70
8gb 2x4gb Xteam PC3-16000(2000Mhz) Dual Channel 1600Mhz 1T
His Radeon 6990 OC
X-Fi Titanium Fatality SC 64mb x-ram
2xOCZ 120gb SSD + lots of SATA2/3 hdd
1000watt Enermax Galaxy SLI/Crossfire PSU

The Gigabyte 990FX motherboards are now on sale in the UK, for anyone over here interested in getting them:

http://www.overclockers.co.uk/produc...=2046&mfrid=49

http://www.scan.co.uk/search.aspx?q=gigabyte+990fx

Dino, NB still a problem here man...
2600 is OK ,but we can not hit 2800 :(
now we are playing with a new 1100T but 2800 seems so far...

but in the other hand ,now we are really ready to rock :D
this score was made by Yoko

http://downloads.criminalcafe.com/fo...11%2013576.jpg

what are you using for NB VID?

i've had a good play with my 1090T and i can bench 3DMARK11 up to 4.4GHz with up to 3200 NB and up to 335HTT

this is one of the shots i had saved with dual GTX470 cards, 315HTT, 3150NB

http://img837.imageshack.us/img837/3...mark119339.jpg

Dino
~1.575v will not work here :(
need to be pushed 1.6v+

its a bit high for these speeds but its working now
http://downloads.criminalcafe.com/fo...3d11%2014k.jpg

The ORB
http://3dmark.com/3dm11/1355322

the Antec HCP is a very nice deal,next run will be under LN2 and we will play one PSU 'til the end no matter what!