Deluxe OC discussion thread

Printable View

Show 100 post(s) from this thread on one page

01-17-2011, 07:05 AM
illuminati-hwt

Quote:

Originally Posted by crossg

Anyone with the Deluxe version running SLI. Stole a GTX 580 from my other PC and it doesn't seem to want run 3D mark 11 (pos) with medi-ocre OC's on the cards. System not OC'd. Could be that I cheaped out on a 1000W PSU but it dumps as soon as the graphic test starts. Wondering if anyone else is having issues? Runs fine in the other system.

Wait for a new driver that supports SLI i 3dm11. Or google evga sli 3dmark11 patch.

Edit, maybe this is only regarding 570 cards? hmm
http://www.evga.com/forums/tm.aspx?m=774133
01-17-2011, 07:15 AM
crossg

Quote:

Originally Posted by illuminati-hwt

Wait for a new driver that supports SLI i 3dm11. Or google evga sli 3dmark11 patch.

Edit, maybe this is only regarding 570 cards? hmm

Thanks. Sli patch is for both. Got both the SLI patch and the Nvidia inspector trick. But your right I'll just wait until Nvidia get their new drivers out, then see.:)
01-17-2011, 11:22 AM
Nano2k

Quote:

Originally Posted by crossg

System not OC'd. Could be that I cheaped out on a 1000W PSU but it dumps as soon as the graphic test starts. Wondering if anyone else is having issues? Runs fine in the other system.

I had to replace my Thermaltake 700W power supply because the comp did hard resets in 3D stuff, I lost 2 days with this and thought the GTX570 was faulty. Whats crazy is that I installed a cheapo 600W power supply and now it works. The specs says it has more 3V and 5V amps but half of the 12V amps, go figure...
01-17-2011, 12:13 PM
Dr.Paneas

4.5 GHz fully stable 10x45 @ 1.300 VCore | 66 C (under Prime)

Unfortunately I can't login into Windows (hangs while loading the splash screen)
at 4.6GHz. I tried even with 1.41 Vcore and still nothing.

How strange is that ?

EDIT:
Clear CMOS
Enable internal PLL
4.6GHz working ;)

Thanks GV (God bless you)
01-17-2011, 12:36 PM
Andrea deluxe

normally @ 4600mhz is not required internal pll overvoltage.....
01-17-2011, 12:38 PM
DavidNJ

Does anyone have the measurement from the centerline of the cpu to the leading edge of the first memory slot? I'm trying to determine if the Noctua NH-D14 will fit with Corsair Vengeance or GSkill RipJaws X memory. The memory is 50mm (about 2") tall. The HSF is 62mm to the edge of the fins, 89.5mm to the edge of the fan.

http://www.noctua.at/images/faqs/nh_...urements_1.jpg
01-17-2011, 12:47 PM
Andrea deluxe

Quote:

Originally Posted by DavidNJ

Does anyone have the measurement from the centerline of the cpu to the leading edge of the first memory slot? I'm trying to determine if the Noctua NH-D14 will fit with Corsair Vengeance or GSkill RipJaws X memory. The memory is 50mm (about 2") tall. The HSF is 62mm to the edge of the fins, 89.5mm to the edge of the fan.

http://www.noctua.at/images/faqs/nh_...urements_1.jpg

get an tr archon....
01-17-2011, 12:50 PM
illuminati-hwt

Quote:

Originally Posted by DavidNJ

Does anyone have the measurement from the centerline of the cpu to the leading edge of the first memory slot? I'm trying to determine if the Noctua NH-D14 will fit with Corsair Vengeance or GSkill RipJaws X memory. The memory is 50mm (about 2") tall. The HSF is 62mm to the edge of the fins, 89.5mm to the edge of the fan.

http://www.noctua.at/main.php?show=c...n#LGA1155_Asus

Ugh. Forgot you were asking about ram..
01-17-2011, 02:49 PM
deaffob

Is CPU Current Capability setting not necessary?
I just watched this video from Newegg: http://www.youtube.com/watch?v=3vBN-cBPs98
He didn't touch the setting and it got upto 4.8ghz
01-17-2011, 03:42 PM
DeadmanX

Explain??? What is wrong with this picture lol..

http://img842.imageshack.us/f/61583872.png/

http://img842.imageshack.us/f/61583872.png/

mind you Prime95 is running as we speak still
01-17-2011, 04:23 PM
DavidNJ

Quote:

Originally Posted by illuminati-hwt

http://www.noctua.at/main.php?show=c...n#LGA1155_Asus

Ugh. Forgot you were asking about ram..

If you could measure from the center of the CPU to the leading edge of the memory we would have our answer. However, I will have my board before the end of the week (shipped today) and can take the measurement then.
01-17-2011, 04:35 PM
orion23

Do any of you guys have problems getting the PC to resume from standy?
It works fine when I'm not overclocking, but cannot get my PC to resume from standy after I change bios settings / overclock?
01-17-2011, 05:15 PM
deaffob

Quote:

Originally Posted by DeadmanX

Explain??? What is wrong with this picture lol..

http://img842.imageshack.us/f/61583872.png/

http://img842.imageshack.us/f/61583872.png/

mind you Prime95 is running as we speak still

Upgrade your CPUZ. Mine read 94.4 bclk with that version. I think that version is not accurate.
01-17-2011, 05:20 PM
dengyong

Quote:

Originally Posted by DavidNJ

If you could measure from the center of the CPU to the leading edge of the memory we would have our answer. However, I will have my board before the end of the week (shipped today) and can take the measurement then.

2.1 inches.
01-17-2011, 05:45 PM
Dr.Paneas

1 Attachment(s)

2500K @ 5GHz @ 1.40 VCore
Motherboard: ASUS P8P67
Cooling: Xigmatek Aegir (Air cooler)
Ram: G.Skill RipJawsX DDR3 2133MHz 9-10-9-27
01-17-2011, 06:05 PM
deaffob

@Dr.Paneas idling at 57c? That's way too high imo.
01-17-2011, 06:11 PM
Dr.Paneas

Not idle my friend ^.
I was running Winrar benchmark at the background.

My 24/7 is 4.5GHz @ 1.3 --> 66C under Prime95 FFTs
01-17-2011, 06:59 PM
DavidNJ

Quote:

Originally Posted by dengyong

2.1 inches.

From the center of the CPU? Not good.

I threw the drawing in the manual into Photoshop a few minutes ago I got 53mm which is 2.097in. So..same answer.

However, since the cooler is 62mm, the dufference is 9mm, .35in. Bigger than a breadbox.
01-17-2011, 07:11 PM
dengyong

Quote:

Originally Posted by DavidNJ

From the center of the CPU? Not good.

I threw the drawing in the manual into Photoshop a few minutes ago I got 53mm which is 2.097in. So..same answer.

However, since the cooler is 62mm, the dufference is 9mm, .35in. Bigger than a breadbox.

Ya could always run the ram in the blue slots.
01-17-2011, 07:43 PM
DirtyLude

Quote:

Originally Posted by orion23

Do any of you guys have problems getting the PC to resume from standy?
It works fine when I'm not overclocking, but cannot get my PC to resume from standy after I change bios settings / overclock?

Ya, I'm having a problem resuming from standby. My PC is rock stable, except for this problem where it freezes on resume. Currently running 4.8Ghz 2500K P8P67. I came on here hoping someone else was having the problem and there was hope of a solution.

EDIT: See you made another thread, here - http://www.xtremesystems.org/forums/...d.php?t=265346
01-17-2011, 08:10 PM
renozi

Quote:

Originally Posted by dengyong

Ya could always run the ram in the blue slots.

I run my ram in the blue slots. 4gbx2 no problems with overclock
01-17-2011, 08:14 PM
Clunk

Done an overclocking guide based on the P8P67 Deluxe, I know most people here won't need it, but there may be other info that's of use :up:
01-17-2011, 08:15 PM
orion23

Quote:

Originally Posted by renozi

I run my ram in the blue slots. 4gbx2 no problems with overclock

I believe the blue slots are the primary RAM slots, see manual for recommended configurations!
01-17-2011, 08:23 PM
dengyong

Quote:

Originally Posted by orion23

I believe the blue slots are the primary RAM slots, see manual for recommended configurations!

It's printed on the board A for black slots and B for blue slots.
01-17-2011, 08:42 PM
orion23

Quote:

Originally Posted by dengyong

It's printed on the board A for black slots and B for blue slots.

I'm just going by the picture where it shows 2 sticks in slots in DIMM A2 and B2 (second and fourth from the cpu...)

Show 100 post(s) from this thread on one page