yea man good luck, and thank you!
Printable View
yea man good luck, and thank you!
really great work! how much of this guide can apply with my GA P67A-UD4-B3? what it's different?
nothing much, all of the same principles will apply.
thanx so much and congratulations great & nice guide.
Hi sin0822..great tutorial for me.
Please , for load line calibration on my gigabyte ud7 b3 ..can i on livel 2 or livel 3 ?
Thank's
Sorry for my bad english
regard
you shoud have like 10 levels correct? or you just have disable, level1, and level2?
With the 10 levels id use level 7.
nope...dont disabled ....i use level 2 ....but with level 7 dont it's high?Quote:
Originally Posted by sin0822
Sorry again...another answer...which is the limit vcore on cpu for 24/7 ?Quote:
Originally Posted by magnifico
1,350 ?
I have a chiller dimas teach for my cpu..whit water at 5°.
Thanks and regards
for 24/7 id keep at 1.45 at most with good cooling. Its all upto you.
Level 7 will give you closet to what you set ion the UD7.
for test stability ...i use prime or intelburntest?Quote:
Originally Posted by sin0822
Hi Sin sorry again please can you help me ?
I have two answer again :
1) You can say difference of tension with the several Levels?
With Level 7 which it is the real tension? I have not understood, you can teach me?
2) Why cpuz don't work on signature Vcore ? (if from bios is 1.30 in cpuz is 1.04 ) bug cpuz?
Hi Sin..please ..sorry again.
I have setting in bios Vcore 1.35 and LLC Level 6 , now in full load Vcore is 1.358 -1.36 .
My answer now is , according to you that value is high ?
that voltage is fine, its all about if you are happy with your temperatures. I think that is a great OC! Congrats man!
CPUz reads the QPi?VTT voltage instead of the vcore.
level 6-7 are teh best. They are all different amounts of droop.
Thank's Sin..you are a great friendQuote:
Originally Posted by sin0822
I use chiller whit water at 10°
ohh i see, well your temps are fine then.
Hi Sin , sorry again , i have another answer .Quote:
Originally Posted by sin0822
Please listen me .
For the energetic saving I must enable :
C1E-
EIST-
C3, C6 States-
CPU Thermal Monitor
And Vcore in Normal?
If now I have put 1,35 on Vcore, what I must put on Dynamic Vcore (DVID)
Thank for help
Regard
well set vcore to normal, and then reboot. It will then list a vcore, the DVID offset is lets say at stock it sets 1.22v, and you want 1.35v you set +0.13v. You can also set LLC to whatever you want.
Hi Sin...sorry again.
I am very crazy fir this problem:
At first ignition pc ...my keyboard dont work whit key CANC for enter in bios.
Only first..only first..but second ignition working
I try another keyboard...but also the same problem....:shakes::shakes:
Thanks
wait until POST code 50 before hitting delete.
I do not own any current gen hardware yet, but this is an extremely impressive overview of the 1155 platform. I am grateful to you ahead of time as I will be building one in the coming months.
Which is post 50 ?Quote:
Originally Posted by sin0822
I dont see this post ..sorry...you ave a screen for me?
You have a Z68 or P67A-UD7 correct? it has that little LED display which shows codes, and says FF when you have booted up? It has a code at the begining, they coincide with a list of codes in the back of the manual. They are POST CODES, wait until at least POST CODE 50, so after it says 50 and the screen appears, hit delete.Quote:
Originally Posted by magnifico
Yea man no problem, i am glad you enjoyed it.Quote:
Originally Posted by oplix
Ok , Now i tryQuote:
Originally Posted by sin0822
Hi ..i resolve this problem.....i have a spyder pro on external hub ....and this hardware was in conflict .....ah ah ah
haha well glad you found out what it was!