LittleDevil's PC case with integrated Phase Change and Watercooling

23db for the fan only or for the entire system?

Compressor is about the same silent as fan.

Random pics:

http://ld-phasechange.com/images/Lit...ases/new/2.JPG

http://ld-phasechange.com/images/Lit...ases/new/3.JPG

Best Regards

This thing gets better and better!

But as I said earlier: the upper and the lower fan-grills wood look better if they both had the same design!
If you can make it honeycomb-style maybe that would look even better...

Your case is dope!

I understand you are going for low air restriction in your grills, but I agree with the above poster--it would look so much better if they were uniform. I second the honeycomb--that is a design that looks decent with big holes.

Thanks for comments. Does anyone have picture of honeycomb on PC case?

Kind Regards

http://upload.wikimedia.org/wikipedi...omb_grille.JPG

That is what I was thinking of, but there is a really nice artsy example I am looking for that someone did a while back, I'll edit this post when I find it.

We will see :)

Best Regards

Some more testing with PSU inside.

http://ld-phasechange.com/images/Lit...k%20rev2/1.JPG

http://ld-phasechange.com/images/Lit...k%20rev2/2.JPG

http://ld-phasechange.com/images/Lit...k%20rev2/4.JPG

http://ld-phasechange.com/images/Lit...k%20rev2/5.JPG


Fan speed adjustment.

http://ld-phasechange.com/images/Lit...k%20rev2/3.JPG

5cm more space for PSU.

http://ld-phasechange.com/images/Lit...k%20rev2/8.JPG

280W heatload.

http://ld-phasechange.com/images/Lit...k%20rev2/9.JPG

Kind Regards

Wow. Beautiful work there. You have talent

This is awesome! :shocked:

One question from a phase-noob: my understanding is that when you are booting the system, you need to first start the compressor and wait for it to reach it's temp. How long does this take with these compressors?

Quote:

---

Originally Posted by Xtrafresh

This is awesome! :shocked:

One question from a phase-noob: my understanding is that when you are booting the system, you need to first start the compressor and wait for it to reach it's temp. How long does this take with these compressors?

---

Exactly :up: It needs about 1 minute.

Kind Regards

So a 19cm deep psu, like the enermax 1250watt will fit??

Quote:

---

Originally Posted by Xtrafresh

This is awesome! :shocked:

One question from a phase-noob: my understanding is that when you are booting the system, you need to first start the compressor and wait for it to reach it's temp. How long does this take with these compressors?

---

You will also need to wait a few minutes after shutting down the compressor to re-start it...a good phase-change-controller will do the job :D

Quote:

---

So a 19cm deep psu, like the enermax 1250watt will fit??

---

The one you saw it on the picture OCZ is 17,5cm long so enermax 1250watt will fit without any problems.

Quote:

---

Originally Posted by GrossmeisterB

You will also need to wait a few minutes after shutting down the compressor to re-start it...a good phase-change-controller will do the job :D

---

It is true. :yepp: It is almost in ''production'' :up:

Quote:

---

Originally Posted by LittleDevil

Compressor is about the same silent as fan.

---

That sounds nice :cool:








As for the case... well... LittleDevil dit it again :clap:

Picture of set. :)

http://ld-phasechange.com/images/Lit...ases/set/1.JPG

http://ld-phasechange.com/images/Lit...ases/set/2.JPG

http://ld-phasechange.com/images/Lit...ases/set/3.JPG

http://ld-phasechange.com/images/Lit...ases/set/4.JPG

http://ld-phasechange.com/images/Lit...ases/set/5.JPG

http://ld-phasechange.com/images/Lit...ases/set/6.JPG

http://ld-phasechange.com/images/Lit...ases/set/7.JPG

Kind Regards

truly awesome! lanparty FTW!

arrived today :)
http://alexiel.stor.li/LittleDevil/case1.jpg
http://alexiel.stor.li/LittleDevil/case2.jpg
http://alexiel.stor.li/LittleDevil/case3.jpg
http://alexiel.stor.li/LittleDevil/case4.jpg
perfectly packed and everything awesome :clap:
more later this week, gonna post some more with a mounted sr-2 and the final system with the 4way

Quote:

---

Originally Posted by sargatanas

arrived today :)
perfectly packed and everything awesome :clap:
more later this week, gonna post some more with a mounted sr-2 and the final system with the 4way

---

Nice, waiting for more pics and thoughts:)

Quote:

---

Originally Posted by woffen

Nice, waiting for more pics and thoughts:)

---

sry was bit busy and I'm still waiting for some armaflex and watercooling stuff....at least I had time for some insulation and test mounting:
http://alexiel.stor.li/LittleDevil/evga%20mounted1.jpg
http://alexiel.stor.li/LittleDevil/evga%20mounted2.jpg
later more:
gonna mount the sr-2 and well I hope the devil won't kill me...but I gonna change the top to mount a quad radiator and add some space :)

EDIT:
for those who are always asking: yes an enermax revolution 1250w or a strider 1500w will fit without any problem ;)

Really nice! Waiting for final pics with watercooling installed =)

Ohh man LittleDevil I've been keeping an eye on this in good old lurk fashion, but I fell off the past couple of weeks. I had no idea someone had one, cant wait to see it all bolted up and running!

well not that much progress and I hope I won't get killed for it but I changed the top a bit ^^
http://alexiel.stor.li/LittleDevil/koolance.jpg
and added another lcd for system informations
http://alexiel.stor.li/LittleDevil/lcd.jpg

sry for the bad picture quality....: sr-2 ;)
http://alexiel.stor.li/LittleDevil/sr2case.jpg

Thats awesome sargatanas, are you just going to phase cool one cpu?