3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

Printable View

Show 100 post(s) from this thread on one page

06-06-2010, 11:10 AM
zsamz_

Quote:

Originally Posted by BeepBeep2

Yeah, but if you go by that...

Then the 2200 CL8's should do 2000 CL7 and then 1800 CL6.

The 2000 CL7 theoretically should be a bit better than the 2200 CL8. 2000 CL7 ram should not have much problem doing 1800 CL6 but this ram seems to have trouble with it.

when i put my 920 in i gonna show ya 1800 cas6;)
i think they all the same chips just some luck involved
06-06-2010, 11:20 AM
radaja

yep i agree.same stuff just its whether you get a decent kit.
06-06-2010, 12:19 PM
zsamz_

Quote:

Originally Posted by radaja

yep i agree.same stuff just its whether you get a decent kit.

:yepp:
jackpot for radaja:D
06-06-2010, 12:46 PM
Shiranui Gen-An

Quote:

Originally Posted by zsamz_

OCZ3RPR1866LV6GK:D
i'm happy i bought em lol
i took the gamble maybe they were from the bad batch but jackpot
i wish i bought 10 sets when they were sellin @ 130$ i paid 180$

Your Reaper kit uses MNH-E? If so what lot#? Seems the stuff 0910 and later is fine.
06-06-2010, 01:00 PM
zsamz_

Quote:

Originally Posted by Shiranui Gen-An

Your Reaper kit uses MNH-E? If so what lot#? Seems the stuff 0910 and later is fine.

:yepp::yepp:
it was only 1 batch that was bad
06-06-2010, 03:01 PM
Don_Dan

Quote:

Originally Posted by Shiranui Gen-An

I used Radaja's settings as a starting point and I was able to get 1740 6-6-6 stable at 1.70v. Very strange that less volts worked.

Do you have a fan over your memory? Please check temps, Hypers don't like to get hot.
06-06-2010, 03:07 PM
Shiranui Gen-An

Quote:

Originally Posted by Don_Dan

Do you have a fan over your memory? Please check temps, Hypers don't like to get hot.

Of course. Using an old Dominator fan.
06-06-2010, 03:21 PM
radaja

whats the max vdimm for hypers for benching?
06-06-2010, 03:30 PM
zsamz_

Quote:

Originally Posted by radaja

whats the max vdimm for hypers for benching?

dont kill the memory they new:rofl:
i'd say 1.8
but i havent given more than 1.68 till now
06-06-2010, 03:34 PM
BeepBeep2

I've got Prime95 for hours at 1.75v with no apparent harm. I'd be afraid to go over 1.78-1.8v for benching.
06-06-2010, 03:36 PM
Hondacity

rams have been used over 1.75v and less than 1.8v ....no crashes yet...
06-06-2010, 03:38 PM
BeepBeep2

Just make sure they don't get hot. You need alot of airflow over the side, I've got a 50 CFM 92mm fan over them. They get really hot even at 1.65v without airflow.
06-06-2010, 03:52 PM
andressergio

Personally i dont like and use those fans that comes with Gskills or Corsair as hot air gets trapped inside...i prefeer to use a side fan or 2, i have 1 pointing the MCH and mem from the left and a 12x12 blowing from the other side

i have them set as this, GSkills PIS 2000CL6

http://img541.imageshack.us/img541/7513/p10406841.jpg

Cheers !
Sergio
06-06-2010, 03:53 PM
radaja

thanks for the quick replies guys.1.75v vdimm it is for me then:up:

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good:up:
06-06-2010, 04:00 PM
andressergio

Quote:

Originally Posted by radaja

thanks for the quick replies guys.1.75v vdimm it is for me then:up:

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good:up:

lol 5C :rofl: thats a nice temp radaja thanks to my new parts i dont need AC anymore
06-06-2010, 04:14 PM
radaja

yea event with my WC ing still use the AC because when i was air cooling using the UD3P
i got used to the MB sensor always showing 15c and now its like with all my new setups
the MB and NB must fall in line.OCD kind of a thing.they all need to be below 25c or it will
drive me nuts:rofl:
06-06-2010, 04:39 PM
andressergio

Quote:

Originally Posted by radaja

yea event with my WC ing still use the AC because when i was air cooling using the UD3P
i got used to the MB sensor always showing 15c and now its like with all my new setups
the MB and NB must fall in line.OCD kind of a thing.they all need to be below 25c or it will
drive me nuts:rofl:

lol Mr Ice

my set will be in my friends house on thursday and then a week and some days to arrive here, cant wait to test them

Cheers :toast:
Sergio
06-06-2010, 04:43 PM
zsamz_

Quote:

Originally Posted by andressergio

lol 5C :rofl: thats a nice temp radaja thanks to my new parts i dont need AC anymore

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c:rofl:
06-06-2010, 04:58 PM
andressergio

Quote:

Originally Posted by zsamz_

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c:rofl:

hell yeah i have an UFESA 11k btu portable also that used on summer to chill the rad
06-06-2010, 05:27 PM
radaja

Quote:

Originally Posted by zsamz_

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c:rofl:

i got a feser quad120 rad on the way.thanks for the tip:up:
06-06-2010, 05:30 PM
zsamz_

Quote:

Originally Posted by radaja

i got a feser quad120 rad on the way.thanks for the tip:up:

feser quad120 love on da a/c commin:D
06-06-2010, 05:33 PM
systemviper

Quote:

Originally Posted by zsamz_

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c:rofl:

sweet :yepp:
06-06-2010, 05:59 PM
zsamz_

Quote:

Originally Posted by systemviper

sweet :yepp:

i got second a/c to cool the room:D wife dont want it anywhere else she thinks they ugly thigs :rofl:
06-07-2010, 03:02 AM
eva2000

Quote:

Originally Posted by radaja

thanks for the quick replies guys.1.75v vdimm it is for me then:up:

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good:up:

nice setup there, using 3x 60x25mm sunon 23.5cfm maglev fans for cooling memory :)

trying some 12GB Elpida Hyper action next

http://img.i4memory.info/reviewimage...c8_12GB_01.jpg

http://img.i4memory.info/reviewimage...c8_12GB_02.jpg

:D
06-07-2010, 03:25 AM
CryptiK

Quote:

Originally Posted by andressergio

Personally i dont like and use those fans that comes with Gskills or Corsair as hot air gets trapped inside...i prefeer to use a side fan or 2, i have 1 pointing the MCH and mem from the left and a 12x12 blowing from the other side

i have them set as this, GSkills PIS 2000CL6

http://img541.imageshack.us/i/p10406841.jpg
http://img541.imageshack.us/img541/7513/p10406841.jpg

Cheers !
Sergio

Quote:

Originally Posted by radaja

thanks for the quick replies guys.1.75v vdimm it is for me then:up:

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good:up:

Heh, you guys are soft, the ram fans are fine :p: In all seriousness I think they are, it's not like the inside of the case is very hot if you have good case airflow, and the ram is easy to cool.

Quote:

Originally Posted by radaja

i got a feser quad120 rad on the way.thanks for the tip:up:

Same rad as I use, I expect you'll like it.

Quote:

Originally Posted by eva2000

nice setup there, using 3x 60x25mm sunon 23.5cfm maglev fans for cooling memory :)

trying some 12GB Elpida Hyper action next

http://img.i4memory.info/reviewimage...c8_12GB_01.jpg

http://img.i4memory.info/reviewimage...c8_12GB_02.jpg

:D

That's some ram pr0n right there George :D

Show 100 post(s) from this thread on one page