Already finished. :(Quote:
Originally Posted by Expat GriZ
Three red dots on availability.
Printable View
Already finished. :(Quote:
Originally Posted by Expat GriZ
Three red dots on availability.
@boostedevo/Ross... nice bclk :up:
~ vtt voltage range you were using for running up to the 243 bclk wall? I look forward to more results with x19 and x21 multis.
Hello guys,
today I have received my new asus RE3, but I have a little problem...
I have an ATI Radeon 5870 installed on it and each time I need to restart Win7, the mobo restart but gave no signal to video card.....
The system boot, enter in Windows (I can hear windows sound) but no video signal.
I must switch off the system, wait some seconds and then restart it, so the video card restart to run.....
What you think can be the problem? I tried to install the video card in all the 4 PCI-E slot but same problem. I have connected all the molex on motherboard but nothingh....
Thanx for replies:)
Double check the power connections to the vid card itself. I had that same thing happen to me when only 1 of the 2 power connectors was not seated properly.
Oh boy, thats a little scary, lol. I tried to purchase this mobo today but stock ran dry before I got out of bed. Now I have to wait for new stock, but I also have a Asus 5870 so hope its not an incompatibility.Quote:
Originally Posted by axlros75
You have a good power supply?
Hey Roger, 1.575Vtt, which is actually less than it needs for 235BCLK on the UD4P with high Uncore/tight mem. With lower Uncore and looser mem on the R3E, 240+ is OK with 1.4x Vtt. I haven't tried benching anything that high on the R3E though, was just looking for max BCLK. I got a 980X with the board, so I am going to drop that in tonight. I'll get some insulation made up this weekend and will put the 920 back on with the SS and post results when I do...Quote:
Originally Posted by PolRoger
just got mine.. damn northbridge runs hot around 57ºc and that little fan asus includes makes more noise than my entire pc :rofl:
time to use this little 60mm silent fans I have laying around :)
hi, please photo pc rig. thanks :)
Thanx mate, I solved with your solution !Quote:
Originally Posted by vladimir
well, now another problem....
i have installed 0534 bios but no way to restart the mobo with this bios.
I had to switch to Bios2 to be able to restart. So keep attention to flash this 0534 bios !!
How can I reflash release bios version to Bios1 chip??
Thanx
:wave:
flashed 0534 successful via Asus update.
See User Guide 2-34: USB Bios FlshBackQuote:
Originally Posted by axlros75
I'll do it, thanx mateQuote:
Originally Posted by crashmax
Is this a beta or official bios. Can I ask what improvement it has over the 0402? thanksQuote:
Originally Posted by Leeghoofd
0531 and 0534 are test/beta versions. they are both better for overclocking, especially under cold. I got more stability and performance.
anyone pass linx or prime 330blk++?
i'm good @ 227 on rexII
227 under water so far. But mobo and bios are brand new, so there is more room I think and I need more time to find out the right settings.
Can someone who owns this board look closely to see what exact Intel LAN chip is used please? I spent hours scouring the Internet and not one review mentioned the exact Intel chip used, oh well it is a mobo made specifically for the overclocker in mind so who cares right?... But still I would like to know what LAN chip Asus soldered onto this board. Thanks in advance
Sure wish this thing would come back into stock... lol
LAN-Adapter: Intel 82567V-2
Hope this is what you searched for. Cheers
Wow what a quick reply, thank you very much. I had actually gone to bed thinking it might be a while before someone answers this question. But the moment I layed my tired head down onto my pillow my Blackberry informed me of new email, haha. Might as well reply right away to say thank you.Quote:
Originally Posted by crashmax
Skorpn
:D Our beloved Smart Phones (hope I don't wake you up now)
Your welcome!
0534 bios works great.
http://valid.canardpc.com/show_oc.php?id=1176432
250 mhz blck on ln2 3dmark stable
253 mhz blck prime stable and 255 mhz blck max cpu-z stable
Testing the board later today on watercooling and air
Wow!!
Can you post your bios settings plz? cannot go higher than 229BCLK...
Here you go:)Quote:
Originally Posted by crashmax
http://hwbot.org/community/submissio...7_920_5257_mhz