The Obsidian 800D thread :D

Quote:

---

Originally Posted by Piggy1918

For the 800D owners, do you think you can fit a 140 single rad on the 140mm fan in the bottom easily? I know you can remove the cage and put in a double, but I am curious to see if you can fit the 140 rad w/o mods.

---

+1 :yepp:

Quote:

---

Originally Posted by Dark-Energy

That looks really nice, huRRi, I wish I had the money to create a setup like that nevermind the amount of effort that is needed :( I always envy those with heavily overclocked i7s and 2 oced 5870s in a water loop, it's common to see these setups with the same exact parts on XS especially with the 800D, but not ones that are as colorful as this ;)

This actually gives me some ideas on what colors I would prefer, I thought that going with the standard blue would look great but now I think orange/UV looks a lot better:yepp:

---

Thanks a lot :)

my 800d
It changes PSU into placing vertically.

http://www.xtremesystems.org/forums/...pictureid=1190

http://www.xtremesystems.org/forums/...pictureid=1191

Can you post some pics of where and how the psu is mounted please :)?

Sick build btw ;)

Hi zigzag
PSU is stored when putting a 15～20 mm spacer in the leg.

It is such a feeling.
http://www.xtremesystems.org/forums/...pictureid=1192

http://www.xtremesystems.org/forums/...pictureid=1193

http://www.xtremesystems.org/forums/...pictureid=1194

Impressive work WhiteSky :D

Quote:

---

Originally Posted by WhiteSky

Hi zigzag
PSU is stored when putting a 15～20 mm spacer in the leg.

It is such a feeling.
http://www.xtremesystems.org/forums/...pictureid=1192

http://www.xtremesystems.org/forums/...pictureid=1193

http://www.xtremesystems.org/forums/...pictureid=1194

---

amazing stuff

Agreed, that is badass. :up:

Wow, awesome setup whitesky. More pics please!:up:

That is the first time I've seen that done in an 800D, it looks great and packs a huge punch as well.

Thank you for the comment.
To be is the photograph of the remainder.

On the power

http://www.xtremesystems.org/forums/...pictureid=1195

The side panel is 5 mm acrylic fiber and the honeycomb meshes of it.

http://www.xtremesystems.org/forums/...pictureid=1196

The cover of the power used [ Lian Li Power Supply Bracket].

http://www.xtremesystems.org/forums/...pictureid=1197

Clever work on the psu mount, ingenious really :)

wow dude nice build, never knew u could put a 480 on the bottom of the 800D, so it can fit 2x 480s... WoW! Mind taking more pics of the inside like res, pumps etc? hehe. :)

Ingenious WhiteSky :thumbsup:

very nice build i have to say

WhiteSky - Your side panels have internal honeycomb structure? Looks really nice and clean, could you provide more details of how you put together this build? Excellent work!:up:

Updated With Q-SLI :D, BTW temps are high so moar rads are needed :)

http://images5.bilddagboken.se/87/_u...4d5245c626.jpg

http://images5.bilddagboken.se/88/_u...630ccc0427.jpg

Hello, it is Ogge swe. It is a good thread.:)
I, too, enjoy in this thread.Thanking you.

Thanking of you, the comment to be glad about you

hello.WarlockSix
The remodeling of a case is simple. It puts a few photographs beforehand.
http://www.xtremesystems.org/forums/...pictureid=1198

1.It decides the position to cut.　2.It cuts the board of the base, leaving the four corners.

http://www.xtremesystems.org/forums/...pictureid=1202
3.It put a 1 mm Steelboard after cutting and it fixed it.　4.It makes the spacer of the 20 mm leg, too.

http://www.xtremesystems.org/forums/...pictureid=1199
5.It cuts a red line in the completing.
6.The used meshes are this[ModRight ModMesh 480mm x 480mm x 1.0mm HEX Aluminum Mesh Panel - Black]

http://www.xtremesystems.org/forums/...pictureid=1200
It uses and it is pouring two fittings for D/D-SLI.

WhiteSky -

Thanks for the details, that is a very clean well done build.

:D
Mac os 10.6.4 mod
http://i955.photobucket.com/albums/a...x/P7190520.jpg
http://i955.photobucket.com/albums/a...x/P7190527.jpg
http://i955.photobucket.com/albums/a...x/P7190530.jpg
http://i955.photobucket.com/albums/a...x/P7190516.jpg
http://i955.photobucket.com/albums/a...x/P7190514.jpg


This my new RIG Boreas II mod:D
http://i955.photobucket.com/albums/a...x/P7150483.jpg
http://i955.photobucket.com/albums/a...x/P7150473.jpg

Whitesky, where, or how did you get that side panel? If you made it, would you consider making another and selling it?? Or was it easy to make.

Thanks

hi Monkeyface
It is selling a side panel here.
CORSAIR Online Store→https://shop.corsair.com/store/item_...spx?id=1171683

Later, it is completion if searching for the factory to cut.

Ok, so I buy that, then cut out the size for the plexi, put that in, then cut the area for the RAD?? How would I install the window?

Is this the window? http://www.performance-pcs.com/catal...ducts_id=24897

Then how do I make it stay?

Yup, I'd like to know too! On the other hand I just got my case and was thinking that if you put the rad on the other side of the case, then you just need to cut an opening in the side without the window. This would be pretty easy to cover with a good grill. You wouldn't have to worry about cutting two holes.

A couple of comments about this case: It's too bad corsair didn't extend the hole pattern at the bottom, the whole length of the case. As one can see it is almost good enough for another 3 fan rad. In fact, if they had made the case 1/4" longer then one could have the triple rad and power supply mounted down there also. Even more, one more slot opening and 1/4" would allow an SR-2 in there!

I find the side cover for the fan on the swappable hard drive cage kind of poorly designed. It seems to just hang from the right side and the upper clasp. I think if could rattle easily there. Anyone else notice this? Am I missing something that should support it from below?

Thanks

Here is my rig:

http://img291.imageshack.us/img291/4350/dsc0455dl.jpg

http://img291.imageshack.us/img291/7114/dsc0456p.jpg

http://img213.imageshack.us/img213/6708/dsc0458b.jpg

http://img213.imageshack.us/img213/9096/dsc0461a.jpg

http://img824.imageshack.us/img824/7686/dsc0463s.jpg

http://img824.imageshack.us/img824/4381/dsc0462e.jpg

http://img824.imageshack.us/img824/4294/dsc0464y.jpg

Heres mine atm:

http://img.techpowerup.org/100726/testing.jpg

I'll have it back together in a month or so lol