Printable View
Quote:
Originally Posted by FUGGER
Quote:
Originally Posted by BenchZowner
haha, like a cloud...everyone sees something else. all i see, is terrible 05 clocks. goes to show how much more 32M is in this chip, its a shame it can't keep this efficiency another couple BCLK even.Quote:
Originally Posted by tool_462
I just love your reports 3oh6! It's always fun and pleasant to read.
Any chance of publishing a BIOS template with some basic OC's you used?
Code:*Frequency/Voltage Control*
Dummy O.C : [Disable]
Target CPU Frequency : 3800Mhz
Target Memory Frequency : 1900Mhz
CPU Multiplier Setting : [20]
CPU Frequency Setting : [190]
PCIE Frequency Setting : [100]
QPI Frequency Selection : [4.270 GT/s]
MCH Strap : [Auto]
Extreme Cooling : [Disable]
EVGA VDroop Control : [Without VDroop]
Current CPU Vcore : 1.30000V
Bootup CPU Vcore : [1.30000V]
Eventual CPU Vcore : [1.30000V]
Current Dimm Voltage : 1.68V
DIMM Voltage : [1.68V]
Current VTT : 1.400V
Bootup CPU VTT : [1.400V]
Eventual CPU VTT : [1.400V]
Current PCH Voltage : 1.050V
PCH : [Auto]
Current CPU PLL : 1.800V
CPU PLL : [Auto]
DIMM 1/2 DQ Vref : [+0mV]
DIMM 3/4 DQ Vref : [+0mV]
DIMM 1/2 CA Vref : [+0mV]
DIMM 3/4 CA Vref : [+0mV]
CPU PWM Frequency : [477 KHz]
VTT PWM Frequency : [240 KHz]
DDR PWM Frequency : [240 KHz]
CPU Signal 1 : [Auto]
CPU Signal 3 : [Auto]
CPU Signal 4 : [Auto]
CPU PCIE 1 : [Auto]
CPU PCIE 2 : [Auto]
DDR Signal 1 : [Auto]
DDR Signal 2 : [Auto]
DDR Signal 3 : [Auto]
DMI Signal : [Auto]
PCH Signal : [Auto]
*Memory Configure*
IMC Type : *Field Family IMC
DRAM SPD : [XMP Profile 1]
DRAM Frequency : [1333MHz]
Target Memory Frequency : 1900Mhz
DRAM tCL : [8 (8)]
DRAM tRCD : [8 (8)]
DRAM tRP : [8 (8)]
DRAM tRAS : [24 (24)]
DRAM tRFC : [Auto (88)]
DRAM tRRD : [Auto (6)]
DRAM Tfaw : [Auto (30)]
DRAM tRTP : [Auto (6)]
DRAM tWR : [Auto (12)]
DRAM tWTR : [Auto (6)]
Command Rate : [1 (1)]
CHA Round Trip Latency : [Auto (52)]
CHB Round Trip Latency : [Auto (55)]
Memory Low Gap : [Auto]
Memory Remap Feature : [Enabled]
PCI MMIO Allocation : 4GB To 256MB
Memory Hole : [Disable]
DRAM Margin Ranks : [Disable]
*CPU Configuration*
Configure advance CPU setting
Module Version : 01.06
Manufacturer : Intel
Intel (R) Core (TM) : i7 CPU 860 @ 2.80GHz
Frequency : 2.66GHz
BCLK Speed : 133MHz
Cache L1 : 256 KB
Cache L2 : 1024 KB
Cache L3 : 8192 KB
Ratio Status : Unlocked (Min:09 , Max:21)
Ratio Actual Value : 20
Hardware Prefetcher : [Enabled]
Adjacent Cache Line Prefetch : [Enabled]
MPS and ACPI MADT ordering : [Modern ordering]
Max CPUID Value Limit : [Disable]
Intel (R) Virtualization Tech : [Enabled]
Execute-Disable Bit Capabili : [Enabled]
Intel (R) HT Technology : [Enabled]
Active Processor Cores : [All]
A20M : [Disable]
C1E Support : [Disable]
Intel (R) SpeedStep (tm) tech : [Disable]
Intel (R) C-STATE tech : [Disable]
this is off the top of my head...Quote:
Originally Posted by Jor3lBR
i also did a little more 32M hunting tonight and finally got a decent run out. these Clarkbar's really hold their own now that we have BIOS development opening up higher QPI ratios. when this article was first published that wasn't possible...i added a note, with the hopes that i can re-visit these results at some point with higher QPI. until then, you get a couple more screens :up:Code:*Frequency/Voltage Control*
Dummy O.C : [Disable]
CPU Multiplier Setting : [25]
CPU Frequency Setting : [220]
PCIE Frequency Setting : [108]
QPI Frequency Selection : [5.333 GT/s]
MCH Strap : [1600]
Extreme Cooling : [Disable]
EVGA VDroop Control : [Without VDroop]
Bootup CPU Vcore : [1.72500V]
Eventual CPU Vcore : [1.72500V]
DIMM Voltage : [1.66V]
Bootup CPU VTT : [1.425V]
Eventual CPU VTT : [1.550V]
PCH : [1.350]
CPU PLL : [1.675]
DIMM 1/2 DQ Vref : [-20mV]
DIMM 3/4 DQ Vref : [-20mV]
DIMM 1/2 CA Vref : [-20mV]
DIMM 3/4 CA Vref : [-20mV]
CPU PWM Frequency : [800 KHz]
VTT PWM Frequency : [640 KHz]
DDR PWM Frequency : [640 KHz]
CPU Signal 1 : [Auto]
CPU Signal 3 : [Auto]
CPU Signal 4 : [Auto]
CPU PCIE 1 : [Auto]
CPU PCIE 2 : [Auto]
DDR Signal 1 : [+31]
DDR Signal 2 : [-31]
DDR Signal 3 : [-31]
DMI Signal : [Auto]
PCH Signal : [Auto]
*CPU Configuration*
Hardware Prefetcher : [Enabled]
Adjacent Cache Line Prefetch : [Enabled]
MPS and ACPI MADT ordering : [Modern ordering]
Max CPUID Value Limit : [Disable]
Intel (R) Virtualization Tech : [Disable]
Execute-Disable Bit Capabili : [Disable]
Intel (R) HT Technology : [Disable]
Active Processor Cores : [1]
A20M : [Disable]
C1E Support : [Disable]
Intel (R) SpeedStep (tm) tech : [Enable]
Intel (R) C-STATE tech : [Disable]
http://3oh6photos.com/forum_post/kpc...32m_6490-1.png
http://3oh6photos.com/forum_post/kpc...ast_6491-1.png
This is terrific. Thanks! Can't believe it took me this long to notice this thread.
Lol - indeed ;). Very entertaining read!!!! :up:Quote:
Originally Posted by Linus@ncix
But looks like carkbar has more bite to it as it looked like at first glance.;)
Thank you my friend I really appreciate that! You have a nice piece of hardware there :up:
just for you Linus...it was all just for you :DQuote:
Originally Posted by Linus@ncix
glad you enjoyed :up:
thanks Mike, and yes...give these little buggers some QPI love and they really start to beat up on 05/pifast/32M. if only they could do AM3 as well ;)Quote:
Originally Posted by mike
no problem...those were the settings i was running last night.Quote:
Originally Posted by Jor3lBR
i was just doing some prelim testing of this GPU yesterday and hammered out a decent 05.
i am not sure i will have time to really give this setup a work-over but i am trying...
http://3oh6photos.com/forum_post/xs/10_02/_MG_4186.jpg
http://3oh6photos.com/forum_post/xs/10_02/_MG_4187.jpg
http://3oh6photos.com/forum_post/xs/...50_44562-1.png
Clarkbar definitely has some 05 strength, and an open 27X multi on this chip would be very interesting indeed :D