Printable View
:clap:Quote:
Originally Posted by jareczek
PIS http://www.xtremesystems.org/forums/...&postcount=146
this is the much more expensive 1.65v gskill PIS http://www.xtremesystems.org/forums/...&postcount=146
if anyones bored and wants to do some lax timing runs at the same speeds as the PIS it would be cool to see how if these newer ic's can do the same thing?
In wonderng why they would even bother with them after these.
what's the maximum volt for this memory for daily use ? the same 1.65V?
My kit maxes out at 1.55v, but Ive seen some others run 1.65v
maxed out @1.55V you mean you can't go further even though you give it more volt ?Quote:
Originally Posted by Eldonko
This RAM doesn't seem to scale very well with voltage, at all. It's quite wacky to play with really. I have not been able to get it to do more than 2100 @ CL9 with any voltage, any settings.
I think I could squeeze more out of them if I understood DDR3 subtimings as well as I understood DDR subtimings back in the 939/TCCD days.
nyeah - Yes. The mem becomes unstable above 1.55v. Like say I have 2000Mhz stable at 1.55v, if I increase to 1.60v I lose stability without increasing speed. Some kits scale up to 1.65v though, just try it.
darthcani - 1600
Too much voltage can cause problems. Memory at a certain frequency will only require a certain voltage. Anything more or less may cause instability.
Thank you
GSKILL SUPPORT
^^ Why can't I find this kind of memory in a 2GB kit or single stick? It seems most manufacturers are not considering those of us on a lower budget.
What is the max voltage for daily use on this chips? Would be 1.6-1.65V too much for daly use?
safe real vdimm is 1.65 ;)Quote:
Originally Posted by Associated
with 790FX haven't got no great results with these sticks yet
Gskill PI, Corsair dominator seems to be doing much better.
So what's the consensus on these, are they decent OC'rs for 2x 2GB PC3-12800 parts?
Also if you under-clock them below stock, can you get tighter timings, & can they run on even less voltage?
I mostly want to run at stock or under-clock w/tighter timings....
But on the rare occasion that I game, a decent OC (not hard-core) would be nice too!
Not sure I'd have quite as much luck as others with a GA-H57M-USB3 though :(
I believe the memory controller on the Clarkdale's (I'm getting Core i3-530) reverts back to the Core micro-architecture.
And of course a lot depends on the board and it's BIOS....
Any thoughts/advice on this or other g.skill RAM greatly appreciated!
In first i want say thanks to Gskill for the sample.
Config:
AsRock H55M-LE
Intel I7 860
G.Skill ECO 1600 MHz 2x2 GB
Thermalright Silver Arrow
Enermax Revolution +85 1250W
With Stock Voltage (1,35V)
1600 MHz 7-8-7
http://img29.imageshack.us/img29/5306/defwg.jpg
1650 MHz 6-8-6
http://img530.imageshack.us/img530/6015/825686.jpg
1700 MHz 7-8-7
http://img826.imageshack.us/img826/6100/850787.jpg
1800 MHz 8-8-8
http://img443.imageshack.us/img443/16/900888.jpg
With 1,55V
1650 MHz 6-7-6
http://img89.imageshack.us/img89/9017/825676.jpg
1800 MHz 6-8-6
http://img41.imageshack.us/img41/9339/900686.jpg
1884 MHz 7-8-7
http://img225.imageshack.us/img225/8482/942787.jpg
1980 MHz 7-9-7
http://img638.imageshack.us/img638/7830/990797.jpg
With 1,65V
2100 MHz 7-9-7
http://img213.imageshack.us/img213/4859/1050797.jpg
2300 MHz 9-10-9
http://img521.imageshack.us/img521/2771/11509109.jpg
Impressive scalability, thanks for sharing, I've been happy with my 4x 2GB.
I run mine mostly at stock or even UC (for HTPC/PVR), but I've ramped them up occasionally, and they've coped well.
Best memory I've bought so far..........
Anyone know what IC eco kits come binned with these days?
PSC probably.Quote:
Originally Posted by zoqiet
There's 1-2 good threads on what they used to be binned with on this forum (under same sub-forum i think)
But I'm not sure if that's still the case for them now...
If you find any recent info & you've got a few minutes, please share, thanks!
Usually PSC, you might be lucky and get a kit with Elpida BBSE.Quote:
Originally Posted by zoqiet
I kind of hate my mobo for having a minimum VDIMM of 1.6V, but I'm happy with my ECO results :)
This is the best MaxxMem I got with my ECO's:
http://img641.imageshack.us/img641/1...ysettings1.jpg
Sooner or later I'm going to increase my VDIMM to 1.65V and see if my timings can get further :) annoep, are those results OS-stable?
Also, has anyone tested the new 2x4GB G.Skill ECO's yet? (rated 1600 8-8-8 1.35V)
No but I'd be interested if 4gb dimms are much better value now.Quote:
Originally Posted by xd_1771
Haven't looked since about Feb.
Soo,nothing new here,just to refresh it a little,here are my results. Cheers!
http://www.shrani.si/t/1w/jX/49XG1gVE/1/ram.jpg
What voltage for those results? Awesome kit you got there.Quote:
Originally Posted by Nwanko
With 1.66V.Quote:
Originally Posted by danielkza
My kit has some sort of cold boot issue. Once I am in windows it works fine. Has crashed my bios twice now.
2144 9-10-9-30 1.6V
http://img.photobucket.com/albums/v4...2144ecoram.jpg
http://www.shrani.si/t/1X/Uq/45girbmk/default.jpg
CPU default clock, RAM at 1333Mhz 5-6-5-15-1T 1.66V