Printable View
nice runs lastviking and equinox. :up:
I now have my water loop good down to -60*C. Now I need to modify the a/c unit and start chilling the water. Right now I have my rad in a bucket of ice water. I doubt I'll do anything exciting, but will post soon if results are better.
Very nice, everyone!
Well, it's obvious that I can't compete with Lastviking without cold. I did come very close to 4 ghz, but I'll fry it if I push harder on room temp.
Problem is I don't want to freeze my butt while I'm fragging ;) And I'm after a daily driver, suicide runs aside. Btw, it would be nice if aod showed total cpu volts, not just vid. I had +.1 in bios, but I suppose I could see it under board status.
Here's 3969 at 30 min and idle:
Quote:
Originally Posted by crazydiamond
4.1 @ 54.5C :rofl:
It seems that master crazydiamond no longer needs the cooling module!
http://solotko.wordpress.com/files/2...ing-module.jpg
lol ive been trying for 4.2 for like the last 3 hours - ive had it crash after 10-15 min. like 10 times... 50C max temp w/ 1.65v :p: using a window ac unit in nov :shrug: i dont know if im gonna get it though i might have to wait for real winter to set in, it should be below 0 here before too long :) its still like 50 out right now for some reasonQuote:
Originally Posted by 64NOMIS
Vista 64 regular ambiant watercooled.
http://i271.photobucket.com/albums/j...1/PB220249.jpg
http://i271.photobucket.com/albums/j...1/PB220250.jpg
http://i271.photobucket.com/albums/j...1/PB220252.jpg
http://i271.photobucket.com/albums/j...1/PB220254.jpg
http://i271.photobucket.com/albums/j...cinebench1.jpg
last 2 tries priming @ 4.2ghz on my cold air crashed at 26 and 25 minutes :shakes: temps right around 50c... i guess i need colder air
So, I tried as much cold as I could arrange. System is balanced on the edge of the window :ROTF:
Outside temp is 7C. I managed 4031 @1.525v. Interestingly, I tried the same freq and voltage as Lastviking at slightly better temps, but it would reboot right away. I had to increase from 1.475 to 1.525 to stabilize it. At a marginally higher freq and much higher voltage, I'm hitting similar temps under load. So it appears he has the better pistol :(
So, 36C at load, 18.9 idle. I really don't want to fry this by pushing volts any higher (again) and for some strange reason my wife wants to spend time with me :shrug:
It's been a blast!
:clap: :lol2:Quote:
Originally Posted by Grinder
That's awesome, and hilarious. What cooling are you using? The WC system in your sig? I'm surprised you couldn't hit 4 with water cooling alone.
This is about all I could get today as the outside air temp where the radiator sits was between 46-47F+/- (8C+/-) during the test and going up. The test system along with the rad is at the window on the East side so I’m getting quite a bit of backlight in the photos so I included a screen shot below each photo.
I know the SS of the test running was beyond the 30min cutoff but I was eating breakfast during the test.:)
Test running, during first test the temp goes to 35C and tops out at 40C+/- by test 15 (1.61V+/- in bios
http://i262.photobucket.com/albums/i...unning4264.jpg
SS of above photo
http://i262.photobucket.com/albums/i...ng11-22-09.jpg
Test stopped
http://i262.photobucket.com/albums/i...imestopped.jpg
SS of above photo
http://i262.photobucket.com/albums/i...wn11-22-09.jpg
thats what I did with my 9950 and 940 last year:rofl:Quote:
Originally Posted by Grinder
notice the thick powercord holding the case from falling out of the window:D
http://i271.photobucket.com/albums/j...1/PC070026.jpg
it was like 7c outside:p:
lol... madness. I connected a duct to my heatsink fan and put the other end out the window... works great and is much easier imo! Maybe you guys should try it out and save your computers from falling out a window lol. Here's a pic of my old setup:
http://img199.imageshack.us/img199/7290/p1010159om.jpg
Nah thats to safe, I like my computer to live on the edge ............the windows edge that is:ROTF:Quote:
Originally Posted by LarsMarkelson
You guys are cracking me up. Glad to see I'm following a well established precedent in my overclocking development. That's quite the lifeline, Titan. My concern was more having it fall back IN, hence the strategic placement of GRID. :yepp:
Yes Lars, I'm using the WC in my sig, with the rad still bolted to the back of the pc. There's a pic earlier in this thread. The chip is a little stepping challenged, I think. It reminds me of the time my Subaru blew a head gasket at 250,000 kms. I was only disappointed because it was a Subaru, and I had high expectations. For many other brands making it to 250k would have been awesome! So it's all about expectations... Nice ductwork btw.
I feel it's my duty to point out that we are all running on "Windows" :rofl:
funny the things we do for a overclock...:)
You giving me too much of ideas! Cool ideas (pun intended:p:)
Great work everyone!:up:
I like to play these games also, but saddly I have no WC setup so ignore if you wish.
Quick and dirty OC here to 4.0ghz
But you know, I never, ever like to do anything nice and easy...
<Ques up Proud Marry>
http://www.youtube.com/watch?v=54XRNQ2C2x0
So I like to take this Prolimatech Mega Shadow Heat Sink and get it rolling, with the big wheels of the Delta "Mega Fast" 7,000rpm 252 CFM fan.
Thats right, be sure to turn it up !
http://www.youtube.com/watch?v=jnot8NmBFos
I had 2 regular fans in push pull on before this and saw about 5c temp drop with the Mega Fast. This fan is about as loud as my Cascade and you can feel the air flow over 3 feet away. Its a bit to much LOL.
http://img684.imageshack.us/img684/7324/img1450e.jpg
http://img684.imageshack.us/img684/6...c3airtestp.jpg
7000 RPM, :shocked:
What were your regular fans you had on before? I feel like it should be more than 5C drop, that fan is BEASTLY.
Fans before were just some case fans I had laying around, nothing special.
I might try pulling the air through the HS as I had it blowing throw it, not sure if it will make any dif tho.
I am sure there are better fans for this, I am not really a Air Cooler guy so I don't know.
Chew said to me to get ahold of 2 Sanyo Denkis amd as he is usually correct. when I let him that is ;) I might try out some of those.
The Mega Fast is clearly to loud for normal use.
Colder here tonight, so one more run. Outside temp is 0C, and the pc is in the window again :) Not sure of the exact temp at the window. I took a pic, but didn't bother uploading it since it's in the same spot.
The run is 4118 @ 1.568v (+.1 in bios, and set 1.475 in aod).
Good one there... looks like i need to try more, it was colder in sweden to. But i stoped to early i see. And know i need to work again.. and its looks that it will geting hoter tonight again :(Quote:
Originally Posted by Grinder
It's -2 here now (was -3 overnight), but I'm at work :(
It looks like my chip needs more volts than yours. I could have done a run at -3C, but I'm getting nervous of condensation. Although it's probably ok with the case drawing in room air and exhausting it out the window. I can see wanting to run a rad outside, but it sometimes gets very cold here when winter sets in, so I'd need antifreeze.
I visited Sweden for work in the mid 1990's and enjoyed it very much. I was in Norrköping for 5 days, with a night in Stockholm at the beginning and end.
Good luck, and don't work too hard.
nice cooling, my idea, its ok this setup and condensation?Quote:
Originally Posted by LarsMarkelson
Always work hard :) .Quote:
Originally Posted by Grinder
This is from sunday to monday night... wake up and did see your 4118mhz :shakes: and needed go to work.
http://i674.photobucket.com/albums/v...0mhz/41001.jpg
http://i674.photobucket.com/albums/v...0mhz/41002.jpg
http://i674.photobucket.com/albums/v...h_MVI_1485.jpg
Nice temps you guys have on WC systems ;)
System:Quote:
Originally Posted by Buckeye
Asus M4A79 Deluxe
965 C3 0942FPMW
2x2 GB Corsair TWIN2X PC8500 DDR2 4GB KIT CL5-5-5-15 2.1v
750W Corsair
Asus 4870 X2 2GB
Cpucooling:
Lapped True Black with Kaze 3000rpm
Temps 0.8c outside, inside close to window 8.8c
Cpu mem settings:
Cpu settings:
Multi: 20x
Ht: 207mhz
Vcore around: 1.55v real(1.625 in bios i think, undervolt much)
Cpu clocks: 4140mhz
Nb settings:
Multi: 9x
Ht: 207
NB/IMC voltage:1,125v
Nb clocks: 1863mhz
Memmory clocks:
Set to pc800
Ht:207
Mem clocks: 414mhz(828)
Timings: auto(5-5-5-15)
Coldair do i use ;)
Here come the last one...i got a day of tommorow from work also :)
http://i674.photobucket.com/albums/v.../IMG_14911.jpg
http://i674.photobucket.com/albums/v...0mhz/41405.jpg
http://i674.photobucket.com/albums/v...0mhz/41404.jpg
http://i674.photobucket.com/albums/v...0mhz/41403.jpg
http://i674.photobucket.com/albums/v...0mhz/41402.jpg
http://i674.photobucket.com/albums/v...0mhz/41401.jpg
http://i674.photobucket.com/albums/v...0mhz/41400.jpg