OCZ 8500 Low-Voltage Blade

Printable View

Show 100 post(s) from this thread on one page

05-22-2009, 01:38 PM
Acoma_Andy

Hello there, wow my first post here!

I picked up a set of OCZ Blade LV as well, I'm currently at 1240mhz 5-5-5-18 @ 1.9v. Performance level 8 and 465 FSB x 2.66. Mobo used is a Gigabyte EP45 UD3P.

http://andersdoggen.googlepages.com/ocz_blade_1240.jpg

Oh and I haven't maxed them out yet.
05-22-2009, 01:42 PM
Zeus

Showing a screen is nice but is there any form of stablity? I'd like to see DDR1250 5-5-5 stable at resonable voltage, i couldn't pull that off. :(

Btw, welcome to XS.
05-22-2009, 02:04 PM
18 is # 1

Mine came from Amazon with black PCBs
05-22-2009, 02:41 PM
Acoma_Andy

Quote:

Originally Posted by Zeus

Showing a screen is nice but is there any form of stablity? I'd like to see DDR1250 5-5-5 stable at resonable voltage, i couldn't pull that off. :(

Btw, welcome to XS.

Ok, just did that. It's memtest 2.11+ stable, full run. Same settings as in previous post.

http://andersdoggen.googlepages.com/ocz_blade_1250.jpg

Thanks for the welcome :up:

Edit: if you want I can take a picture with my digital camera from memtest?
05-22-2009, 04:40 PM
-n7-

Quote:

Originally Posted by Acoma_Andy

Ok, just did that. It's memtest 2.11+ stable, full run. Same settings as in previous post.

http://andersdoggen.googlepages.com/ocz_blade_1250.jpg

Thanks for the welcome :up:

Edit: if you want I can take a picture with my digital camera from memtest?

Lovely, just beautiful.

Run a couple (dual core) or four (quads) instances of HCI Memtest in Windows & take a screenie after it hits 100%+

I think i'm going to have to buy two 2x2 GB kits of this stuff.
Too tempting.

Just don't really want to go thru eBay or no name stores...hoping it shows up @ NCIX/DirectCanada/MemoryExpress/etc soon.
05-22-2009, 04:44 PM
Acoma_Andy

Well I got this for you all non-believers:

http://andersdoggen.googlepages.com/memtest1.jpg

http://andersdoggen.googlepages.com/...erest_1261.jpg

http://andersdoggen.googlepages.com/ocz_blade_1260.jpg

Satisfied yet? :D
05-22-2009, 04:56 PM
zsamz_

Quote:

Originally Posted by Acoma_Andy

Satisfied yet? :D

nope:D
05-22-2009, 05:05 PM
Hoss331

If the 8500s do that I wonder what the 9600s will do or if there even worth it. :rolleyes:
05-22-2009, 05:20 PM
LiquidReactor

Quote:

Originally Posted by Hoss331

If the 8500s do that I wonder what the 9600s will do or if there even worth it. :rolleyes:

I dont really even care, Im buying them anyways :D
05-22-2009, 05:49 PM
Acoma_Andy

Quote:

Originally Posted by zsamz_

nope:D

That's too bad because I just tried 1264mhz and I get 18 errors. So 1261mhz is my max at 1.9v :p:

I could of course pump up the voltage a bit more, but I'll play nice and not cross the maximum voltage too much ;)
05-23-2009, 02:02 AM
Zeus

Nice one AA, do they get hot with 1.9V? Gonna try 1.9V too soon. :)
05-23-2009, 04:16 AM
Don_Dan

Quote:

Originally Posted by Hu13caP

Guys, what about radiator size, hight and fattness?

They are about 15mm higher than normal PCB heigt, two sticks fit in two nearby RAM-slots, but it's tight.

Quote:

Originally Posted by Mescalamba

Wow CL4 1000MHz .. only Microns could do this before. :) Really nice new chips.. (grats Samsung:)

Not entirely true, but it's nice to see this kit do 500MHz CL4, considering it's using 2GB sticks.

Quote:

Originally Posted by Eagle_Watch

550mhz 5-5-5-15 @ 1,8v (thats stock configuration of the gskill)

Looking forward to see all your results in CL5 ;)

Added new CL5 results at 1.8V.

Quote:

Originally Posted by Miravo

Black PCB is available in Germany (and Europe) because of european demand of Black PCB

From what I heard all of the kits should be using black PCBs.

Quote:

Originally Posted by -n7-

No offense was meant by my post.
I very much appreciate a detailed review of things :)
We don't get enough people willing to spend that time, so it's a good thing you are taking the time.

My post wasn't directed at you though...

I've already done the "scientifics" for Intel chipsets for years now.
The best performance always comes from higher speeds vs. tighter timings, so for myself & who i was replying to (18 is # 1), that's mainly what i look for.

Keep the good stuff coming. :up:

Okay, I'm relieved that some people like a detailed test. :)
You are right about the Intel chipsets, higher frequencies beat tighter timings most of the time, but I wanted to include CL4 tests for the reason given some posts earlier.

Quote:

Originally Posted by 18 is # 1

Has anyone seen testing with Intel?

:confused:

Quote:

Originally Posted by YMAA

Any 8GB testing being done? I'd probably spring for two kits if they could do 1200MHz with 4 DIMMs on P45.

Tony has done some 8GB testing on AMD, look in his thread in the AMD section.

Quote:

Originally Posted by Acoma_Andy

Hello there, wow my first post here!

I picked up a set of OCZ Blade LV as well, I'm currently at 1240mhz 5-5-5-18 @ 1.9v. Performance level 8 and 465 FSB x 2.66. Mobo used is a Gigabyte EP45 UD3P.

You have PM!

Quote:

Originally Posted by Zeus

Nice one AA, do they get hot with 1.9V? Gonna try 1.9V too soon. :)

Didn't you test with 1.9V already?
Yes, the heatspreader gets quite hot, shows how effective OCZ's heatspreader is, but I was pretty surprised to see them get that hot with a "low" voltage of 1.90V.

Added a new highest frequency for CL5 at 1.80V, sorry I didn't have time to test more this week.
05-23-2009, 06:20 AM
Mescalamba

They are hot at 1.9V cause these chips are made by smaller process than others.. eg. heat is concentrated in much smaller area than other chips.. Decreasing size of chips has some disadvantages.. Would be nice with some Thermalright coolers. :)
05-23-2009, 06:30 AM
18 is # 1

Quote:

Originally Posted by Mescalamba

They are hot at 1.9V cause these chips are made by smaller process than others.. eg. heat is concentrated in much smaller area than other chips.. Decreasing size of chips has some disadvantages.. Would be nice with some Thermalright coolers. :)

The Blade spreaders are very similar to the Mushkin Ascent's. They do not run very warm.
05-23-2009, 07:09 AM
Mescalamba

Quote:

Originally Posted by 18 is # 1

The Blade spreaders are very similar to the Mushkin Ascent's. They do not run very warm.

Ehm.. Mushkin Ascent has vapor chamber. :D Thats not even little bit similar..

Plus as much as I know .. Mushkins run at much higher voltages than this.

Doesn't matter.. I wouldn't try more than 1.9V withou air cooling or better heatspreaders. (btw. Thermalrights mem cooler are able to cool memory at 2.6V, tried with my D9GKX).
05-23-2009, 07:52 AM
Acoma_Andy

But 1.9v should be safe right? I mean, if the EVP goes to 1.85v I think an additional 0.05v wouldn't do too much harm. Most boards overvolt the ram anyway.
05-23-2009, 08:32 AM
BeepBeep2

Yeah but anything past 1.9v won't gain you any performance, just heat. At least I think it's the conclusion that everyone came up with.
05-23-2009, 11:28 AM
Acoma_Andy

Maximum speed for me at CL4, with 1.9v.

http://andersdoggen.googlepages.com/...e_1018_CL4.jpg
05-23-2009, 01:11 PM
18 is # 1

Quote:

Originally Posted by Mescalamba

Ehm.. Mushkin Ascent has vapor chamber. :D Thats not even little bit similar..
Plus as much as I know .. Mushkins run at much higher voltages than this.

As I have Ascents, I'm pretty familiar with them. My comment was to suggest their size and temperature characteristics are like the Mushkin.
05-23-2009, 02:32 PM
OLDcomer

Which of these is better?
05-23-2009, 02:44 PM
Acoma_Andy

Quote:

Originally Posted by OLDcomer

Which of these is better?

The Blades have a better heatspreader, that is the only difference.
05-23-2009, 02:45 PM
YMAA

Quote:

Originally Posted by OLDcomer

Which of these is better?

They're exactly the same except for the heatspreaders.
05-23-2009, 02:50 PM
billdavis

I bought 8gb of the g-skill F2-8800CL5D-4GBPI I cant run all 8gb @ 1100 on a 780i but it is low volt of 1.9 so i assume they are the same ic's
05-23-2009, 03:35 PM
zsamz_

Quote:

Originally Posted by billdavis

I bought 8gb of the g-skill F2-8800CL5D-4GBPI I cant run all 8gb @ 1100 on a 780i but it is low volt of 1.9 so i assume they are the same ic's

you wrong there your gskills are powerchips they scale 2.1v max and they dont get hot
05-23-2009, 03:57 PM
Acoma_Andy

Quote:

Originally Posted by billdavis

I bought 8gb of the g-skill F2-8800CL5D-4GBPI I cant run all 8gb @ 1100 on a 780i but it is low volt of 1.9 so i assume they are the same ic's

I have the G-Skill PI 8800's and I can confirm they are absolutely not the same. My max clock with them at performance level 8 was 1130mhz (1170mhz with PL9), and the OCZ Blades do 1261mhz with that. Massive difference.

Show 100 post(s) from this thread on one page