woaw ! terrific GG there, can it boot (just boot) at 500 ? and or bench via setfsb with such an fsb ?
woaw ! terrific GG there, can it boot (just boot) at 500 ? and or bench via setfsb with such an fsb ?
I think is a problem of chipset X48:yepp:Quote:
Originally Posted by Holmer
it can boot at 500 but not stable for benchies.. :rolleyes: yet! :DQuote:
Originally Posted by ToyTen
Thx xt0m, then I got great hopes for my Q6600 http://images0.hiboox.com/vignettes/...e3cb6de8b1.png except that it needs lots of volts under water in this case. (L728A861-vid 1.2000v)
Hey you guys having that mobo, what was the bios at the VERY first boot? Mine is 0115. On asus support I only found 0201. What about you out there ??
:D Here too - 0115 seems to be stock delivery version, but not to find on the ASUS homepage...............:rolleyes:Quote:
Originally Posted by ToyTen
Can someone upload the 0115 bios? thanx
ok, I might push it to its limits before upgrading then :yepp:Quote:
Originally Posted by camouflage
A question to all, about an eventual incompatibility with OCZ ddr3 gold series speed 533 Mhz cas7-7-7-20@1,5vddr...is it still so ? doesn't it change with the actual newer bios ? ( I have those :p: )
@OverClocker_gr: If I do save it to a floppy or so before you get it, I 'll upload the .rom file. but i doubt it lasts soo long before you find one
If you can :)
I cant find it on the net :(
For me the 0115 is the best bios for FSB
On nb i have the fusion block from the maximus formula.
http://img66.imageshack.us/img66/155...2008631ps0.jpg
http://img146.imageshack.us/img146/2240/5803dpv6.jpg
http://img391.imageshack.us/img391/5569/591pd7.jpg
Found it.
It was in the cd provided with the mobo :p
Thanx anyway :)
CPU Features
Ai Overclock Tuner Manual
CPU Ratio Setting 11
FSB Strap to North Bridge 400
FSB Frequency 418
PCIE Frequency 110
DRAM Frequency DDR-1672MHz
DRAM Command Rate Auto
DRAM CMD Skew on Channel A Auto
DRAM CMD Skew on Channel B Auto
DRAM CLK Skew on Channel A Auto
DRAM CLK Skew on Channel B Auto
DRAM Timings
DRAM Timing Control Manual
CAS# Latency 7 DRAM Clocks
RAS# to CAS# Delay 7 DRAM Clocks
RAS# PRE Time 7 DRAM Clocks
RAS# ACT Time 18 DRAM Clocks
RAS# to RAS# Delay Auto
REF Cycle Time Auto
WRITE Recovery Time Auto
READ to PRE Time Auto
---------------------------------------------------------------------------------------------------------------
READ to WRITE Delay(S/D) Auto
WRITE to READ Delay(S) Auto
WRITE to READ Delay(D) Auto
READ to READ Delay(S) Auto
READ to READ Delay(D) Auto
WRITE to WRITE Delay(S) Auto
WRITE to WRITE Delay(D) Auto
---------------------------------------------------------------------------------------------------------------
Write to PRE Delay Auto
PRE to PRE Delay Auto
ALL PRE to ACT Delay Auto
ALL PRE to REF Delay Auto
DRAM Static Read Control Disabled
DRAM Dynamic Write Control Disabled
---------------------------------------------------------------------------------------------------------------
Ai Clock Twister Auto
Ai Transaction Booster Auto
Voltage Settings
CPU Voltage 1.5000
CPU GTL Voltage Reference 0,62x
CPU PLL Voltage 1,6
FSB Termination Voltage 1,32
DRAM Voltage 1.90
NB Voltage 1,45
NB GTL Voltage Reference 0,67x
SB Voltage 1,2
Clock Over-Charging Voltage Auto
---------------------------------------------------------------------------------------------------------------
Load-Line Calibration Normal
CPU Spread Spectrum Disabled
PCIE Spread Spectrum Disabled
Configure Advanced CPU Settings
CPU Ratio Setting 11
C1E Support Disabled
CPU TM Function Disabled
Vanderpool Technology Disabled
Max CPUID Value Limit Disabled
LLC is giving random BSOD when set to Performance. Still don't know what to do with Clock Over-Charging Voltage.
Upped the voltage a little bit and managed to boot into windows at 4,750MHz and used SetFsb to reach 4,937MHz with singel stager. Settings were the following:
CPU Voltage 1.5700
CPU GTL Voltage Reference 0,62x
CPU PLL Voltage 1,7
FSB Termination Voltage 1,38
DRAM Voltage 2.00
NB Voltage 1,49
NB GTL Voltage Reference 0,67x
SB Voltage 1,2
Clock Over-Charging Voltage Auto
Verification link here:
http://valid.x86-secret.com/show_oc.php?id=371322
Waiting for more inputs about the bios version but I will see soon.Quote:
Originally Posted by OverClocker_gr
Nice adaptation you got there ;) Could you please make that spi1m again ? but at 3600Mhz precisely?
you mean 600*6?
I dont think that its possible :(
I did the 1m for "stability" not for the number :p
no matter the fsb you set, just cpu frequency 3600Mhz, easier to compare. You could maybe do a 4000Mhz eitherQuote:
Originally Posted by OverClocker_gr
ok. :)
does anybody knows the pll in use for setfsb ? :p: muchas gracias
http://www.xtremesystems.org/forums/...&postcount=109
Second pic :)
Quote:
Originally Posted by ToyTen
Same here, mine came with 0115 - running 0401 now tho.Quote:
Originally Posted by camouflage
Seems more stable with +1800 mem and low timings ;)
the 0401 is better for high speed rams but not for fsb.
With 0115 i am able to boot at 600 but with 0401 no luck :(
Stuck around 530-550
@ToyTen
here you go :)
http://img364.imageshack.us/img364/1...toyotenux2.jpg
thx a lot man! atm I boot at 550 fsb and spi4m passes allright :) soo different from GA-X38T-DQ6... amazing in deed
I search for my reference... beback soon ;)
here you go http://pix.nofrag.com/5/e/2/2b25a664...032204bc8.html
some parameters differ from you to me, but what I got is quiet similar to your score.
indeed its quite similar.
But with 1m its hard to do a comparison ;)
yes and for exemple of complication: how is your system optimized for that particular bench? mine was a bit tweaked, not much.Quote:
Originally Posted by OverClocker_gr
My actual results on the seach of max spi1m for max fsbhttp://pix.nofrag.com/7/3/5/47ba8231...dfb58020tt.jpg and max fsb: http://pix.nofrag.com/7/6/b/64f7b569...639191e1tt.jpg
If I don't reach 600 fsb tonite (3600Mhz at that coef6) I'll post later after getting some sleep yo
hm,i did and a 32m run.
I m not fully tweaked for pi but there is a lazy 32m pi
http://img525.imageshack.us/img525/2959/32m3600mv4.jpg
When i was trying to reach max fsb the mems were @ ~850-880
@ 1-1 maybe i ll go higher.