Gigabyte EP45-DS4 first extreme performance !!! (56k Warning!)

I was getting coldboot issues at -100 and coldbug at -148, same CPU and board. What rev was your CPU?

Nice FSBs Benny.
I shall start testing the EP45T-DQ6 next week :D

Quote:

---

Originally Posted by hixie

I was getting coldboot issues at -100 and coldbug at -148, same CPU and board. What rev was your CPU?

---

Hey andrew, sorry i forgot the CPU rev.

Quote:

---

Originally Posted by BenchZowner

Nice FSBs Benny.
I shall start testing the EP45T-DQ6 next week :D

---

Thanks m8... i just got DS4, DQ6, DS3R, DS3P and DS3 retail version on hand.. but no DDR3 version :(...will test it again

Was everyone getting similar FSB?
Cant wait to get my hand on one to improve efficiency from FSB and RAM speed :)

P45 overclocks QUAD FSB much easier than any other board

i had a crappier board but i was easily benchmarking 3D at 460

actually i was able to bench at 480 with relative ease but some other guys with slightly better boards were doing some 500+ MHz FSB 3D stable....hicookie did around 512Mhz 3D runs on AIR cooling lol
so did Pt1t next to me and some screenshots at around 530Mhz all 4xcores enables lol :up:

i also benched at 5.4 and 5.5GHz (458*12) with -95 to -100C on the base of the pot as much chip had a bad cold bug

Quote:

---

Originally Posted by BenchZowner

Nice FSBs Benny.
I shall start testing the EP45T-DQ6 next week :D

---

:eek: damn i gotta make some friends with your Gigabyte ppl hahaha

where's my board :D hahahahaha

Looks like I was right then Dinos.
The P45 clocks quads ( FSB-wise ) better than the rest Intel chipsets ( so it looks ).

Quote:

---

Originally Posted by dinos22

:eek: damn i gotta make some friends with your Gigabyte ppl hahaha

where's my board :D hahahahaha

---

Nah, most of the times you or Tim get the hardware first.

Quote:

---

Originally Posted by dinos22

P45 overclocks QUAD FSB much easier than any other board

i had a crappier board but i was easily benchmarking 3D at 460

actually i was able to bench at 480 with relative ease but some other guys with slightly better boards were doing some 500+ MHz FSB 3D stable....hicookie did around 512Mhz 3D runs on AIR cooling lol
so did Pt1t next to me and some screenshots at around 530Mhz all 4xcores enables lol :up:

i also benched at 5.4 and 5.5GHz (458*12) with -95 to -100C on the base of the pot as much chip had a bad cold bug

---

Thomas (Pt1t) got a suicide shot at 535 i think. Plus my boards will be arriving this week :D

BTW (to all the other people looking at this thread), do not take our benches as the real thing. These boards had so many problems you wouldn't believe it. Expect the retail boards to be even better!

Quote:

---

Originally Posted by BenchZowner

Looks like I was right then Dinos.
The P45 clocks quads ( FSB-wise ) better than the rest Intel chipsets ( so it looks ).



Nah, most of the times you or Tim get the hardware first.

---

hehe i'm just joking around
my hands are full with so much hardware to test hahaha
it would take a while to get to it i'm sure

i really want to do some Geforce GTX cough cough runs and post them up but then again i don't want my Johnson chopped off for it hahaha

You get our sloppy seconds Bill :P

Quote:

---

Originally Posted by T_M

You get our sloppy seconds Bill :P

---

:rofl::rofl::rofl::rofl::rofl:

i wonder if it's A2 revision or later actually cause FSB for Dual Cores was OK but not fantastic :shrug:
i guess we'll find out when these boards eventually arrive heh

Quote:

---

Originally Posted by dinos22

hehe i'm just joking around
my hands are full with so much hardware to test hahaha
it would take a while to get to it i'm sure

i really want to do some Geforce GTX cough cough runs and post them up but then again i don't want my Johnson chopped off for it hahaha

---

I can risk my Johnson ( no NDA signed, alternate source :D ) but... I'd rather keep my promise and keep receiving nice stuff from my contact :D

Quote:

---

Originally Posted by T_M

You get our sloppy seconds Bill :P

---

If I find out that you two mess up with my samples... S L A U G H T E R H O U S E : AU & Hardware the movie :p:

Quote:

---

Originally Posted by BenchZowner

If I find out that you two mess up with my samples... S L A U G H T E R H O U S E : AU & Hardware the movie :p:

---

hahahah watches Tim ring up GB and tell them to give Bill a :banana::banana::banana::banana: board hahahah j/k

Haha you guys are nuts

I have this broad @ here :D

Can't really test it's oc potential because i have only one running cpu and it's a that p4 :ROTF:

Which one Solid ?
EP45T-DQ6 or EP45T-DQ6 Extreme ?

that looks so much fun! :up:

Hrm, wonder when I'll receive a board. I need a new toy to play with :cool: Maybe I'll have LN2 by then.. just maybe. All hell will break loose the moment I have LN2 :eek:

Gomeler, set me up two rotary cascades for my gpus, and send them to me.
I'll give ya LN2 :p:

jk

Quote:

---

Originally Posted by BenchZowner

Which one Solid ?
EP45T-DQ6 or EP45T-DQ6 Extreme ?

---

EP45-DS4 which is an very early ES :D

533 on a QX9770 like that : :D

http://img135.imageshack.us/img135/3035/533nw6.png

On 1.312 this chip goes very well, the board is promising some fun in the future.:D

Yeah... end of NDA :D and this some my results on Q9300 and QX9770

Q9300@500MHz FSB benched ;)
http://overclockzone.com/zolkorn/yea...eak/Clip_5.png

http://overclockzone.com/zolkorn/yea...eak/Clip_6.png

QX9770@5.5/5.4GHz benched :)
http://overclockzone.com/zolkorn/yea...eak/Clip_7.png

http://overclockzone.com/zolkorn/yea...ng_break/6.png

http://overclockzone.com/zolkorn/yea...ak/01_5.4g.png

http://overclockzone.com/zolkorn/yea...ng_break/4.png

http://overclockzone.com/zolkorn/yea...ng_break/5.png

:D

max fsb on QX?