D-Tek Fuzion V2 RELEASE THREAD!

Printable View

Show 100 post(s) from this thread on one page

05-02-2008, 08:27 PM
xtclocker

Quote:

Originally Posted by Waterlogged

I've seen this question asked a couple times with no answer given.

No, the Delrin sections of the v2 (internally and externally) are vastly different from the v1. The v1 has a solid mid plate that is also external whereas the mid plate on the v2 is completely internal.

Nice that you found out!
05-02-2008, 08:34 PM
Waterlogged

Quote:

Originally Posted by xtclocker

Nice that you found out!

Actually, I used my eyes, that grey crap between my ears and a little something called common sense. :rofl::ROTF: :p:

v1 disassembled

v2 disassembled
05-02-2008, 08:36 PM
xtclocker

Quote:

Originally Posted by Waterlogged

Actually, I used my eyes, that grey crap between my ears and a little something called common sense. :rofl::ROTF: :p:

v1 disassembled

v2 disassembled

WOW nice images too, that very clear now!:rofl:
05-02-2008, 08:38 PM
xtclocker

Here's a image from V1 http://www.dtekcustoms.com/productim...ase_render.jpg
05-02-2008, 09:47 PM
iowamoe300

Someone see if two 1/2" bitspower compression fittings will clear each other! Please Please Please!! If they are proven to fit, I will order this block!
05-02-2008, 09:52 PM
Polizei

They don't fit.
05-02-2008, 10:00 PM
FuriousSalesman

Wasn't there a Bitspower ST transfer base that was going to be released so compression fittings would fit on MCW-60 and Fuzion?
05-02-2008, 10:09 PM
smee

Hey guys!

Well I picked my V2 block up today at petra's around 4PM.
Thanks so much Quoc and Alex! :D

Heres some waterblock pr0n: ;)

FuZion V2
http://i254.photobucket.com/albums/h...g?t=1209794745

FuZion V1
http://i254.photobucket.com/albums/h...g?t=1209794768

Both together now
http://i254.photobucket.com/albums/h...g?t=1209794810

Well, I dunno bout you guys, but I REALLY like the new version! Can't wait to test it tomorrow!!
I'll be posting results and stuff this weekend. :up:
05-02-2008, 10:51 PM
largon

Am I correct that the V2 baseplate is exactly same as V1?
05-02-2008, 10:54 PM
smee

Quote:

Originally Posted by largon

Am I correct that the V2 baseplate is exactly same as V1?

Yes sir!

BTW, one thing to note! The Fuzion V2 does not come bowed like the original Fuzion.
05-02-2008, 11:55 PM
I34z1k

Who wants to bow theirs to test? :-D
05-03-2008, 12:09 AM
smee

Quote:

Originally Posted by I34z1k

Who wants to bow theirs to test? :-D

I'm thinking about it, but don't know exactly how to go about doing that........
05-03-2008, 12:12 AM
Janno

mine is arriving in a week or two

ordered a loooong time ago, but it was worth the wait, i kind of knew they'd release a new revision :up:

i can say i'm kind of mantic :rofl:
05-03-2008, 12:21 AM
I34z1k

Well i'd bow mine which i should get this month hopefully, but i don't know where i'd be able to find What i need :(
05-03-2008, 12:22 AM
smee

Quote:

Originally Posted by I34z1k

Well i'd bow mine which i should get this month hopefully, but i don't know where i'd be able to find What i need :(

But "how" do you bow it?
05-03-2008, 12:29 AM
I34z1k

Hmmmm can't you do it with an o ring?
05-03-2008, 12:35 AM
smee

Quote:

Originally Posted by I34z1k

Hmmmm can't you do it with an o ring?

Oh yes, your right.... thats how you do it! :up:
I'll have to try that..... I've got some o-rings here.....
05-03-2008, 01:36 AM
ANP !!!

Quote:

Originally Posted by smee

Hey guys!

Well I picked my V2 block up today at petra's around 4PM.
Thanks so much Quoc and Alex! :D

Heres some waterblock pr0n: ;)

Well, I dunno bout you guys, but I REALLY like the new version! Can't wait to test it tomorrow!!
I'll be posting results and stuff this weekend. :up:

Great pics :up:, the V2 looks a lot better indeed. I cant wait to order mine. It will happen a bit later though.
05-03-2008, 03:42 AM
coolfris

Quote:

Originally Posted by Martinm210

I like the newer smooth lines. Kind of reminds me of a headcrab on Half Life..:up:

The solidly attached lower mounts should help with mounting consistency, I like the lower mount.:)

V3:

http://i26.tinypic.com/10nxmyu.jpg

Just throw it in and it starts mounting. :up:

;)
05-03-2008, 04:16 AM
fungry

@coolfris lololol. The V2 definitely went in that direction in terms of aesthetics xD.
05-03-2008, 04:17 AM
Xilikon

Quote:

Originally Posted by Waterlogged

Actually, I used my eyes, that grey crap between my ears and a little something called common sense. :rofl::ROTF: :p:

v1 disassembled

v2 disassembled

Thanks for posting this. It looks the V2 is a great improvement from the V1 in reducing the leaking possibilities (the V2 only have 1 gasket to worry instead of 2 from the V1). I guess they fixed the issues from the V1 like the leaking mid-plate, using the pro mount and spacing the barbs apart a bit more to fit 3/4" OD tubing with clamps more easily.

It looks great but IMHO, I won't rush and buy one when I'm already using the V1 with the pro mount which give me great results. Maybe in a future 2nd build (I'm currently pondering if I want to watercool my future HTPC boxen in a PC-A05B, another challenge to take).

I would like to see the thermal testing results but I'm sure there is a few who is already doing this so I'll sit back, drink a good beer and wait :up:
05-03-2008, 04:19 AM
disruptfam

can anyone confirm if these fittings will work? with the v2?

http://www.performance-pcs.com/catal...ducts_id=21277
05-03-2008, 06:24 AM
junkun13

no difference on the spacing of the barbs?.....
05-03-2008, 08:15 AM
DavidNJ

What we need are comparative thermal results with different nozzles to go with the pressure results. I am curious what the results are on different orientations. The corner over the scavenge port should have much more flow than the corner diagonal to it, and somewhat more than the other two. In the V2 versions, the cover comes more into play. I wonder which is better. Note that a typical vertical installation place that scavange port over a cooler part of the IHS.
05-03-2008, 08:48 AM
smee

Quote:

Originally Posted by Xilikon

I would like to see the thermal testing results but I'm sure there is a few who is already doing this so I'll sit back, drink a good beer and wait :up:

Quote:

Originally Posted by DavidNJ

What we need are comparative thermal results with different nozzles to go with the pressure results.

I'm planning on starting some thermal testing today if UPS would drop my mobo off at the front door....
I won't be able to give you guys pressure results, as I don't have the kind of tools that Martin has.

I have both the stock mid-chamber plate and the quad chamber insert for the Fuzion V2 along with the nozzel kit for the V1 (which also works with the V2 AFAIK). I will be testing nozzels with each block down to the 4.5 or 5.5 nozzel (not sure which one yet).
I'll also be trying stock Fuzion V1 vs. stock Fuzion V2.
I'll be doing multiple remounts for each test to make sure the results are good.

I may attempt to bow the V2 block and test that, but I'm not sure...
All the tests will be conducted with my main system, I'll be testing Idle and Load on stock clocks and Idle and Load on OC clocks.
Heres the systems spec's:

QX6700 ES
ASUS Striker Extreme 680i
2GB Corsair Dominator 800Mhz Cas4
EVGA 8800GT 512MB
Corsair 650W Single 12v PSU
Seagate 500GB 7200.11 32MB HD

What other kind of testing are you guys interested in seeing done?
Like I said, I can't do pressure testing or flow testing, because I don't have those kind of tools :( I'll leave those tests up to Martin... :p:

LOL!!!!! @coolfris, Thats funny!!!!! It totally does look like that too!! :rofl::ROTF:

Show 100 post(s) from this thread on one page